Used Torque 600 Nm for sale (15,399)

Condition: excellent (used), Frigo GYRoCOMPACT 600 Classic spiral freezer, 34 tiers. Had only run for 14,000 hours when the factory closed. Beautiful condition. North South configuration. 34 tiers, 80mm tier height so perfect for burgers, sausages, chicken nuggets, fish fingers, spring rolls, hash browns etc. Djdpfx Answztmaszjwa

Condition: excellent (used), WetCoater 600 in lovely condition. Uprated model with HD heavy duty pump. Dwodpfxsx Hbfhs Anzoa

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel with electrical hoist Dedezkabtepfx Anzjwa steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists Dwsdpfxszi Sd De Anzsa total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Dodpjw D Aybefx Anzowa

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Dsdpfx Asx Altfonzswa Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 8,310 mm, total width: 1,641 mm, total height: 1,824 mm, overall weight: 2,100 kg, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 5.3 kW (7.21 HP), pressure: 1 bar, number of injections: 6, temperature: 300 °C, Title for MachineSeeker AFO Heat AFOGRILL-6B-600 industrial gas-fired infrared grill – 2011 Sales Description For sale: AFO Heat AFOGRILL-6B-600, an industrial gas-fired infrared grill for the continuous grilling, browning, and heating of food products. The machine is equipped with 6 infrared gas burners, each with a thermal output of 46 kW. The total installed thermal output is therefore 276 kW. This grill is suitable for industrial food production and can be used, among other things, for meat products, hamburgers, chicken products, kebabs, and similar products. Technical Specifications Manufacturer: AFO Heat NV Model/Type: AFOGRILL-6B-600 Year of Manufacture: 2011 Serial Number: K015 Dodszn Ht Dopfx Anzjwa Number of Burners: 6 Thermal Output: 6 × 46 kW Total Thermal Output: 276 kW Electrical Power: 5.3 kW Supply Voltage: 3 × 400 V + N + PE Required Gas Pressure: 20 to 100 mbar Machine Weight: approximately 2,100 kg Construction: stainless steel CE Marking: present The AFOGRILL is designed for professional and industrial applications where uniform and powerful heat treatment is necessary. Thanks to the infrared gas technology, the product can be grilled quickly and given an attractive color and grill pattern. Dimensions, belt speed, capacity, type of gas used, and other information are available upon request. Short version AFO Heat AFOGRILL-6B-600 industrial infrared gas grill, year of manufacture 2011. Equipped with 6 burners, each with 46 kW, for a total thermal output of 276 kW. Electrical power 5.3 kW, connection 3 × 400 V + N + PE, gas pressure 20–100 mbar, and weight approximately 2,100 kg. Stainless steel construction with CE marking. Suitable for the continuous grilling and browning of meat, chicken, and other food products.

Condition: ready for operation (used), Yokogawa TM-H6A3PB1NR076 torque motor SN:96H105 + 6RH-D9 gearbox SN:96H120, used, normal signs of wear, 100% functional, delivery as shown in the photos. Dwsdpfjzl N Sqox Anzsa

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,895 h, load capacity: 2,500 kg, lifting height: 3,680 mm, free lift: 150 mm, load center: 600 mm, fuel type: electric, construction height: 2,550 mm, battery capacity: 625 Ah, remaining battery capacity: 85 %, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 4,895 * Lifting capacity: 2,500 kg at 600 mm load center * Lifting height: 3,680 mm * Overall height: 2,550 mm * Year of manufacture: 2018 Still 2.5-ton electric forklift with full cabin, telescopic mast for clear visibility, side shifter, 4th valve, battery at 85%, very good tires, joystick 4+, lighting compliant with StVZO regulations, fork length 1,200 mm, charger Price includes 1,000 hours of service according to Still manufacturer specifications and a valid UVV inspection upon sale. The following options are available at an additional cost: Dwodpfx Anszl H Aajzja Attachments such as fork positioners, rotating devices, etc. Different fork lengths Inspection, demonstration, and test drive are available upon request by telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). Further information and offers can be found on our website.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,147 h, load capacity: 3,000 kg, lifting height: 6,580 mm, free lift: 2,080 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Double pedal Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tire size: 23x10-12 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tire size: 200-50-10 Rear tires condition: New Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2018 Dwodpfx Ajxvt Dlsnzoa Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as delivery at competitive rates. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Displayed operating hours were recorded as of the listing date. Subject to prior sale, modifications and errors excepted. Sideshift, fork positioner, Stabau S11-ZVI-30-S-01 integrated 3rd valve, 4th valve, rear work lights, front work lights, heating, road traffic approval (StVZO), fully enclosed cabin, full free lift, safety light, seat heating,

Condition: ready for operation (used), Year of construction: 2019, Offered for sale is a motorized Caljan telescopic belt conveyor. Retracted base length: 6000mm, telescopic extension: 12300mm, total extended length: approx. 18300mm, belt width: 600mm, max. belt load: 50kg/m, electrical power: 3.87kW, operation via joystick and control buttons directly on the boom. Weight: approx. 4900kg. Documentation available. Inspection possible by arrangement. Dodpfx Aezta Eksnzjwa

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 15,710 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dwsdszmkmxjpfx Anzea Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, full free lift, safety light.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 14,173 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Dwsdpfjzmkmrjx Anzea Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, full free lift, safety light.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 21,074 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 2,860 mm, fork carriage width: 1,360 mm, fork length: 1,200 mm, empty load weight: 7,250 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Dwodpfew S N R Uex Anzea Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing options at attractive conditions are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this H50D-02/600. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment in our facility. Full free lift,

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, Dedjzcy S Repfx Anzowa maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Engine: MAN (12 Cylinder) Dedjg Sxrcjpfx Anzewa Power: 600 kVA

Condition: like new (used), “Herbold 600/1000 – Granulator / Shredder” for Sale Also many other manufacturers like: Pallmann / Lindner. Find our complete stock on our website. Dsdeggfkbjpfx Anzjwa Manufacturer: Herbold Type: 600/1000 Electrical Motor: 55 kW Included

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Dimensions: see photos / technical drawing -Number: 4x mounting cubes available - Price: per piece Djdpfezk D T Hsx Anzewa -Dimensions: 600/400/H400 mm -Weight: 165 kg/unit

Condition: good (used), Year of construction: 2018, Approx. 600m conveyor system, packing line, SSI Schäfer – used Price ex works (net): only €99,500, disassembled, packaged, and loaded! Manufacturer: SSI Schäfer Year of manufacture: 2018 Type: Conveyor system Many short sections/elements Roller width mainly 70cm, element width approx. 78cm Dwedpozpf Nyofx Anzea Motorized roller conveyor Belt pusher Belt conveyor Incl. curved belt conveyor from Transnorm Curve/wedge merge (roller conveyor curves) Tapered roller curve Roller switch Back-up roller conveyor Folding elements/passages Etc. Ground floor, 6 roller conveyors for goods in and out with conveyor belt drive - 1st floor, five roller conveyors to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyors to remove goods from 80 workstations with conveyor belt drive - 1st floor, used cardboard belt conveyor for removing cardboard boxes with conveyor belt drive Incl. various belt conveyor curves from Transnorm Used cardboard box sizes (L x W x H): max. 800x600x320mm, min.: 340x120x119mm, max. weight 32kg, min. 1kg The offered price includes control cabinet, control system, light barriers, transitions, etc. Not included in the price (but can be purchased for an extra charge): the 80 packing tables, 2 spirals. Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters Djdpfxjztaure Anzewa - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • the chuck has a diameter of 325 mm + is included • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes Dodsy Twc Nspfx Anzewa

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Dwedpfx Aevvi Anenzja

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Dsdpfsziaa Tox Anzjwa dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 350 mm, overall weight: 2,300 kg, input voltage: 380 V, Equipment: documentation/manual, We can offer you, without obligation, ex warehouse, subject to errors and prior sale: H E R M L E CNC-controlled universal tool milling machine with 4th axis Type UWF 600 CNC (HDH TNC 425) Year of construction 1995, new LCD monitor, 1 year old Table travels: longitudinal X 400 mm Vertical Z 350 mm Milling slide travel, transverse Y 330 mm Table size 630 x 335 mm Dodpfxoztl H Ts Anzewa Spindle mounting SK 40 Spindle speeds in 3 stages, vertical/horizontal 40 – 6,000 rpm Arbor stroke, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment Automatic tool changer • HEIDENHAIN 4-axis control system Type TNC 425 with graphics and various subprograms, mobile electric handwheel Vise, 2 tons clamping force • Vertical head can be easily swiveled away for using the horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different collets, • Separate control cabinet, separate coolant system, • Central lubrication, ammeter, etc. Machine comes from a training workshop, from 1995 to 2014, has been in our possession since then and has been used very little. Table with tool spindles is included. Condition: good – ready for demonstration, monitor of the HDH control system has been replaced. Delivery: immediately, machine is already on a pallet, ready for transport, but can be demonstrated at any time. 12-ton forklift truck available.

Condition: used, all stainless steel belt width 600 mm mobile adjustable speed adjustable working height with air knife outside dimensions (l x w x h) : ± 3.400 x 1.300 x 1.900 mm Dwsdpfezh Ei Dex Anzja