Used Powerlite 600 Ex for sale (16,207)

Condition: excellent (used), RS Simulators We offer a test cabinet here. Water-cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800 mm (W x H x D) External dimensions: 1100mm x 1850mm x 1500mm (W x H x D) Power consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Bodpjzdn Stjfx Apvjli Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Bjdpfxezh D Rye Apvjli Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2015, operating hours: 1,332 h, lifting height: 4,600 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Linde H20D-02/600 diesel forklift, year of manufacture: 2015, hours: 1,332 h, rated load capacity: 2,000 kg, lift height: 4,600 mm, triplex mast, hydraulic side shift, full cab, engine: [30 kW/41 hp], weight: 3,690 kg, fork length: 2,400 mm, in good condition! Bjdpfxozhff Ee Apvoli Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Power steering, cabin = Further information = Lifting capacity: 2,000 kg Overall height: 215 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), mileage: 198,199 km, power: 257 kW (349.42 HP), first registration: 09/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2001, number of seats: 2, Equipment: crane, Crane Number of hydraulic extensions: 10 Number of manual extensions: 2 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Winch: ✓ = More information = General information Number of doors: 2 Cab: single Registration number: 5218BMT Axle configuration Suspension: leaf suspension Front axle: Steering Blsdpfezbt Trox Apvsi Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 17.355 kg Carrying capacity: 8.645 kg GVW: 26.000 kg Functional Crane: FASSI F 600 XP Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 198,199 km, power: 257 kW (349.42 HP), first registration: 09/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2001, Crane Number of hydraulic extensions: 10 Number of manual extensions: 2 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Winch: ✓ = More information = General information Number of doors: 2 Cab: single Registration number: 5218BMT Axle configuration Blodpfx Apjzbt Sbjvji Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 17.355 kg Carrying capacity: 8.645 kg GVW: 26.000 kg Functional Crane: FASSI F 600 XP Extendable superstructure: Yes Interior Number of seats: 2 Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede Bedpfx Apovy It Tjvoli

Condition: used, Year of construction: 2015, operating hours: 12,028 h, load capacity: 5,000 kg, lifting height: 2,800 mm, fuel type: diesel, construction height: 2,750 mm, gearing type: automatic, Equipment: cabin, head guard, Linde Forklift H50D-02/600 VIN: F01789 * 12,028 operating hours Bedpfx Aoyb U H Hspvoli * Solid rubber tires front & rear * Duplex mast * Full cabin * Heater * Air conditioning * VW engine, 55 kW * Load capacity: 5 t * Lift height: 2,800 mm Other information: * 1 previous owner New main inspections / safety checks or payload recalibration (downgrading/upgrading) available on request. We are happy to assist you in obtaining export/transfer license plates. We can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, modifications, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide selection of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is very important to us, which is why we offer our customers an outstanding all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with the loading of your purchased vehicles. Arranging special transport We can assist you in organizing special transports. Temporary / export license plates We can help you obtain export/temporary license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: ready for operation (used), A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible. Blodpfxjyttwnj Apvsi

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Blodpfxjyyzpyo Apvji

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Bledpfsxa Elcsx Apvoi

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,147 h, load capacity: 3,000 kg, lifting height: 6,580 mm, free lift: 2,080 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Bodsxvt Dlspfx Apvoli Mast type: Triplex Transmission: Double pedal Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tire size: 23x10-12 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tire size: 200-50-10 Rear tires condition: New Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as delivery at competitive rates. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Displayed operating hours were recorded as of the listing date. Subject to prior sale, modifications and errors excepted. Sideshift, fork positioner, Stabau S11-ZVI-30-S-01 integrated 3rd valve, 4th valve, rear work lights, front work lights, heating, road traffic approval (StVZO), fully enclosed cabin, full free lift, safety light, seat heating,

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Blsdpfx Ajxy Iikopvoi

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Bjdpfsnxi H Uox Apvoli Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: excellent (used), Year of construction: 2006, color: other, Empty weight: 500 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bjdpezfig Uofx Apvjli Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 25,500 mm Number of bays / racking row: 09 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 06 units Pallet spaces per racking row: 54 units Total pallet spaces: 54 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 500 kg Included in the scope of supply: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 36x Pallet racking beams, used Material color: yellow Box profile: 80 x 50 mm Beam type: TRV1-270-085-30 CE Clear span: 2,700 mm Agraffe: 5 hooks Max. load per pair of beams Bsdpfx Ajzb U S Aspvsli 1,500 kg, with evenly distributed load 72x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 40x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Assortment of SK50 tool holders/tools (approx. 600 pieces). Bedpfx Aoy U Ithspvjli Item Condition: Good used condition.

Condition: used, mileage: 48,400 km, power: 55 kW (74.78 HP), first registration: 07/2017, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: blue, gearing type: automatic, number of seats: 1, Year of construction: 2017, Equipment: air conditioning, Vehicle No.: 472-25 HAKO CityMaster 1600 REINEX Weed Control with Hot Water/Steam Interchangeable body, winter service possible, hydraulic connections Emission standard: 97/68/EC First registration: 07/2017 * 48,400 km * Engine operating hours: 5,623 h * REINEX HDA/S 100-0207-17 * Hot water burner operating hours: 2,192 h * 100–200 bar in combination with mobile hot water high-pressure cleaner * Steam range: 150°C steam setting with max. 10 bar * Water tank capacity: 1,000 L * Spray lance * Air conditioning * All-wheel drive * Volkswagen 4-cylinder inline engine * 2-speed automatic/hydraulic transmission * Maximum speed 40 km/h * Camera * Wheelbase 1,600 mm * Length / Width / Height: 3,829 mm / 1,200 mm / 1,975 mm * German documents Inspection possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained and refunded upon receipt of the certificate of export. Company or advertising logos on vehicles may have been digitally edited in the photos. No guarantee is given regarding the function of accessories. Bledpfx Asyadk Sopvsi All details without warranty – subject to errors, changes, typos, and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. Please refer to our general terms and conditions and take note of these.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Bodpfx Asww Im Hopvjli Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbeams, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Blsdpfxoi Ewqks Apvei Crossbeam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes of the material. The material color may vary. The chipboards can be either coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is generally approximately 5 working days.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Bljdpfx Apoyay D Ievsi Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Year of construction: 2018, condition: new, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Here, we offer you a new post protector from the manufacturer Mecalux for purchase. The post protector is suitable for frame profile widths of up to a maximum of 120 mm. The scope of delivery includes: 01x Post protector, new Material color: orange For stand profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Overall depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (center-to-center): approx. 400 mm Weight/piece: approx. 4.298 kg 04x Hex head screw: M8 x 25 mm 04x Lock nut: M8 Blsdpfx Asd Rxyrspvei 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems. Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized Bledpfehvmmtox Apvji The images serve to illustrate the material. The material color may vary. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) Bodpfx Ajhvmnbopvoli 02x workbench crossbeams, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Your contacts within our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used post protector from the manufacturer Gemac for sale here. The post protector is suitable for a frame profile width of up to 90 mm. The scope of delivery includes: 01x Post protector, used Material color: cream white Design: V For stand profile width: approx. 90 mm Overall height: approx. 600 mm Overall width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole diameter: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 kg 02x Mounting plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hex head screws: M10 x 35 mm Bedpefdqkaofx Apvsli 04x Serrated nuts: M10 04x Washers: M10 Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Bsdpfx Aeyaxmhepveli Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.