Used Tos Olomouc for sale (703)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Hjdpfxjw Nmw Ho Abvjfd Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Hfsdpfx Abow Iu Nhevsd Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Hfodpoybbi Ijfx Abved Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Hsdpfx Asmk E D Isbvjfd Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, functionality: fully functional, turning diameter over bed slide: 630 mm, turning length: 3,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW Hfsdpfx Abex N Iq Njvod

Condition: used, Year of construction: 1966, feed length X-axis: 1,400 mm, feed length Y-axis: 440 mm, feed length Z-axis: 450 mm, total height: 2,430 mm, overall weight: 5,100 kg, For sale is a milling machine manufacturer Tos type FA5V in working condition. Hfedpfet E I Drox Abvsd Can be inspected under power. The machine is sold without the magnetic table and milling cutter (only the machine) from location 61279 Grävenwiesbach

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter over cross slide: 800 mm, spindle bore: 70 mm, turning diameter: 800 mm, turning diameter over bed slide: 510 mm, turning length: 2,750 mm, total length: 5,600 mm, total width: 1,400 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 20 rpm, rotational speed (max.): 900 rpm, rotational speed (min.): 20 rpm, We offer this ready-to-use TOS Hostivař SU 80 A lead/traverse spindle lathe, year of manufacture 1980. Hedpfx Absx Uymtsvsfd Machine type: SU. 80 S A Main spindle power: 15 kW Main spindle speed range: 20–900 min⁻¹ Longitudinal feed range: 0.09–0.90 mm/rev Cross feed range: 0.05–0.50 mm/rev Metric thread range: 0.1–22 mm/rev If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, travel distance W-axis: 800 mm, CNC Boring Mill TOS VARNSDORF Technical Specifications Brand: TOS VARNSDORF Model: WHN 130 Hedpfsx Tfngjx Abvjfd CNC: Heidenhain ITNC 530 Year: 1999 / Fully Retrofitted 2014 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, Machining, PINACHO, MORI SEIKI, Milling Machine, Lathe, Grinding Machine, Boring Mill, Press, Laser, Shear, Press Brake)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers. Hfedpfxju U Ewgo Abvod

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 63 CNC 3000 Centre height: 630 mm Centre distance: 3000 mm 1 grinding wheel: 500/380 x 100 x 203 mm Hfjdpfxsv N D Hbe Abvod

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600mm Hjdpfxjxhck Sj Abvefd digital reading Complete machine with documentation, tool holders, change gears,...

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Hfedpfx Aowma N Ssbved Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m

Year of construction: 1965, condition: used, grinding diameter 630 mm grinding length 4000 mm centre height 335 mm Hfodpfougnn Sox Abvod total power requirement 28 kW weight of the machine ca. 15 t dimensions of the machine ca. m

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Hjdpfx Aewvhxgobvefd Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Hodpfx Asxk Tyijbvofd

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 Hfedpfx Absxdwkfjved T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Hfodpfxow Hbnvs Abvod Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Hfjdpfxjxqxvvj Abvod

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter Hjdpfx Aboxtabxevofd – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Hfodpfepy A Iuox Abved Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM Hfsdendcg Njpfx Abvod 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 780 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 2,500 rpm, TECHNICAL DETAILS Hfsdpfexb Rpcsx Abvod Travel X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 780 mm Number of machining axes (excluding parallel axes): 5 Table Clamping surface (left-right): 1,000 mm Clamping surface (front-back): 1,000 mm Workpiece weight (max): 6,000 kg Rotary axis: C > Positioning accuracy 0.001° Milling Spindle/Head Spindle type: Swivel head > Positioning accuracy 2.5° Speed range: up to 2,500 rpm Tool holder: ISO SK 50 Drive power: 22 kW Tool Magazine Tool positions: 60 Workpiece Automation Number of storage spaces: 2 Pallet length: 1,000 mm Pallet width: 1,000 mm Number of pallets: 2 MACHINE DETAILS Dimensions & Weights Space requirement (left/right): 6,400 mm Space requirement (front/back): 6,900 mm Overall height: 4,000 mm Total weight: approx. 26,000 kg Control: HEIDENHAIN TNC 426

Condition: ready for operation (used), Year of construction: 1993, External cylindrical grinding machine Manufacturer: TOS Type: BUB 40-1000 Year: 1993 Control: Cetos K 51 WORKING AREA CYLINDRICAL GRINDING Max. swing diameter 400 mm Workpiece weight between centers (max) 500 kg Workpiece weight one-side clamped (max) 100 kg WORKING AREA EXTERNAL GRINDING Max. grinding diameter 400 mm Min. grinding diameter 10 mm Grinding length 1000 mm TABLE – CYLINDRICAL GRINDING Swiveling (B-direction) from 8.5 ° Rotation range B-axis up to -4.5 ° Longitudinal travel 1200 mm WORKPIECE SPINDLE STOCK Swiveling (B-direction) from 0 ° Rotation range B-axis up to 90 ° Spindle bore 40 mm Number of gear stages 2 Drive power 9.5 kW Tool holder MK 5 TAILSTOCK Quill stroke 40 mm Quill fitting MK 5 Contact force (max.) 4 kN GRINDING SPINDLE STOCK Swiveling (B-direction) from -15 ° Rotation range B-axis up to 45 ° GRINDING WHEEL Type: grinding wheel, disc Diameter (max) 500 mm Bore: diameter 203 mm Width 80 mm ELECTRICAL CONNECTION DATA Connected load 16 kVA Connection voltage 400 V Network frequency 50 Hz DIMENSIONS / WEIGHTS Required space -left/right- 4700 mm Required space -front/back- 2050 mm Total height 1900 mm Total weight approx. 5400 kg ADDITIONAL EQUIPMENT (GRINDING) Balancing device yes Machine in well-maintained condition Workpiece spindle stock swivels 90° Grinding spindle stock swivels -15°, +45° Table swivels +8°30' - 4°30' Hfedpfjwp D Aujx Abvsd Accessories: - hydrostatic spindle - various corundum grinding wheels - 2 diamond grinding wheels - Balancing head MPM, renewed in 2021 - Filter system - Extraction system

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Hedpfx Ajxf Ez Uobvofd Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components Hfedpev Hzqxsfx Abved 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder