Used Tos for sale (681)

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette Isdpfsb A Tdvjx Abveap -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 Iodpfsd Ar Uxsx Abveap -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Condition: used, Bezel, stick, lynette Iajdeb A Tdaepfx Abvop -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 107 mm -Tip height: 180 mm Iaodpfxsb A Tdbs Abvep -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Isdpfjw U Aahox Abveap Fixed table

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Iedpsw Urirefx Abvjap

Year of construction: 1968, condition: ready for operation (used), A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026. Iajdpsyifltofx Abvsp

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm Ijdsyh Np Hjpfx Abvsap – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Year of construction: 2001, condition: ready for operation (used), Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible. Iaedpsw Nq R Rsfx Abvsp

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Iajdpjt Hkh Aefx Abvjp

Year of construction: 1989, condition: ready for operation (used), Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible. Iaedpfxjvyr I Ie Abvep

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM W-AXIS SPINDLE TRAVEL 710 MM TABLE 1400 X 1600 MM WORKPIECE LOAD 8000 KG Iaodpfjx Da Slex Abvep SPINDLE SPEED 10 - 2000 RPM ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: good (used), Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm -Weight: 143 kg Isdpfx Ajdzymasbvjap

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm Iaedpfsx U Eb Asx Abvsp X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Ijdpfx Ajh U Rznebvsap Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus Iaedpfxox U Encs Abvop total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm Ijdpevb A Uujfx Abvoap table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: excellent (used), Year of construction: 2003, Tool Milling Machine TOS FNGJ 40 with 3-axis Heidenhain Digital Display Year: 2003 - Travel paths X/Y/Z: 600x400x400 mm - Automatic feeds and rapid traverse on all three axes - Spindle speeds from 63 to 3150 rpm - Tool holder ISO 40 - Hydraulic tool clamping - Fixed table, size 800x400 mm - Vertical and horizontal milling device - Swiveling vertical head with quill - Coolant system Dimensions (LxWxH): 2.5 x 2 x 2.3 meters / Weight: 2600 kg Isdpfx Aeyubpbebvoap Accessories/options: - Heidenhain digital readout system, 3-axis - Tool holders - Vice - Documentations Under power in our warehouse!

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm Iasdpferi Nvvjx Abvop - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: excellent (used), 4 knives Table length: 300 cm Isdpfx Absyk D H Iovjap Table width: 63 cm Motor power: 5 kW

Condition: refurbished (used), CNC Heidenahin or Sinumerik Iodjr Hdqxopfx Abvoap Travel distance X-axis: up to 1,800mm Travel distance Y axis: up to 1,600mm Travel distance Z-axis: up to 1,250mm Table load: up to 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Optional: Automatic Tool Changer.....40 pos Coolant through spindle.....20 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe

Condition: good (used), Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm Iaodpfxeb A Ntye Abvjp -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg

Condition: used, Year of construction: 1998, functionality: fully functional, Tabulka 1800 x 1800 mm Průměr vřetena 130 mm Osy X x Y x Z ... 2000 x 2000 x 800 mm Vřeteno 800 ot/min Max. zatížení stolu 12 t Strojní dimesniony 6700 x 6000 x 4420 mm Hmotnost stroje 32 000 kg Ijdpfx Abjwhpv Rjvjap Řídicí systém MEFI 872 Series. Přestavěn v roce 1998.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Iasdpfx Aboxf Inkovep Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 Ijdpswp H Efofx Abveap - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum