Used Tubesca Scale for sale (2,060)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after Dcjdpfxexp Rywj Adaep torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, laterally adjustable loading ramps, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulation, rotating beacon, spring-loaded parking brake, including axle load indicators, vehicle fully hot-dip galvanized, surcharge for: hydraulic ramp displacement = price: €1,000. -- Subject to errors, mistakes and changes, sample images --, More data at: !, More details: ! Dedpfxoxt U Awj Adascp

Condition: excellent (used), functionality: fully functional, Quark balls or piped pastries: The ball portioner is designed for portioning small quantities of homogeneous masses and for filling patisserie products in small-scale production, all via manual operation. Robust construction, easy to clean. The dosing quantity is infinitely adjustable. All parts that come into contact with the filling material are made of stainless steel or food-grade plastic. Comes with a stainless steel stand. Used unit, cleaned. Dodpfewpz Afjx Adascp Many more bakery machines are in stock!

Condition: used, New: No Field of application: Freight transport Please contact ATS Norway for more information Dodpfewi Rz Dex Adascp Please provide reference number upon request: 20383 Description: 9 meter truck scale for sale. It includes an old computer that has not been tested. Ready for delivery. Own weight: 1111 Model: Lastebilvekt

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Djdpfsxaa Nvox Adaecp The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: used, functionality: fully functional, With approximately 75.6 linear meters in length and 6.45 m in height, this used Jungheinrich MPB pallet racking system provides a high-performance heavy-duty shelving solution for industrial storage requirements. Designed for 324 pallet spaces, this modular high bay rack boasts load capacities of up to 1,800 kg per level. The combination of galvanized uprights and powder-coated beams makes this warehouse racking an ideal choice for logistics centers, manufacturing companies, and large-scale warehouses. If you are looking to purchase a used pallet rack, you will receive here a flexible, immediately available industrial rack for efficient storage of Euro pallets. Customizable to Required Dimensions: The rack uprights can be individually modified to your desired height, precisely and professionally in our workshop. Contact us for tailored solutions to meet your storage requirements. PRODUCT DETAILS: - Height: approx. 645 cm - Depth: approx. 110 cm - Length: approx. 7,560 cm - Shelf load: 1,800 kg - Beams: approx. 270 x 11 cm - Beam color: yellow powder-coated - Uprights: approx. 645 x 110 cm, pre-assembled - Upright color: blue powder-coated - Levels: ground + 3 - Pallet spaces: 324 including ground level - Version: Used Jungheinrich MPB Dcodoxrzygspfx Adasp SCOPE OF DELIVERY: - 28 x upright frames (approx. 645 x 110 cm), pre-assembled - 162 x beams (approx. 270 x 11 cm) - 324 x safety pins Price: 6,600.00 € net 7,854.00 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner forwarding company – freight costs depend on your postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding quotation tailored to your requirements. Whether you need new construction, modification, or expansion – we provide expert consulting for your racking system configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive impression of our pallet racking, storage shelving, and other solutions. Many systems are assembled and ready to view. Our technical advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or telephone. You can find our phone number on our company profile. ☎️ We are available by phone from Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Condition: good (used), Year of construction: 2012, load capacity: 1,800 kg, lifting height: 9,000 mm, fuel type: electric, Equipment: pallet forks, sideshift, BT RRE 180 Reach Truck Low operating hours! Dcsdpfx Asncblbodaop Lifting height: 9 m! Only 6027 hours! Including scale Including charger Available immediately!

Condition: new, Heidenhain LIP 581C 270 G0 glass scale .: 508194-06 , serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Dsdpji Eapqefx Adaocp

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center Manufacturer: Haas Model: VF-3 SSYT Year of manufacture: 08-2022 Control: Haas S/N: XXXXX Spindle hours: approx. 3,700 h Technical data: ----- Dcedpfx Adoxtfttsaep - Table size: 1,219 x 457 mm - Travel X-Y-Z: 1,016 x 660 x 635 mm - Spindle: 12,000 rpm / 22.4 kW - Tool holder: SK40 - Tool magazine with 30+1 stations - Through-spindle coolant: 21 bar (TSC) - Additional fine filter for coolant - Spiral conveyor for chip removal - Centralized lubrication / oil lubrication - Option: P-Cool - Option: WIPS-R - Option: IPS - Option: User macros - Option: Air blast through machine door - Option: Coordinate rotation and scaling - Option: Spindle orientation - Option: Rigid tapping - Option: Power-failure detection module - 1GB program memory - Ethernet and WiFi interface - Footprint LxWxH: 3.20 x 2.40 x 2.70 m - Weight: approx. 3.6 t Accessories: ----- - Documentation - 3D probe + tool probe - HRT-210 rotary table - Handheld control panel with display

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering Dsdpfstvz Rfsx Adaecp The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, Year of construction: 2001, The Seital SE 15 X Cream Separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key points about cream separators in general, and functions that may apply to the SE 15 X model: - Functionality: The main purpose of a cream separator is to enable the efficient extraction of cream from whole milk. This is essential for producing various dairy products. - Design: The SE 15 X model generally features a centrifuge mechanism that spins the milk at high speeds to separate the lighter cream from the denser skim milk. - Capacity: Cream separators can vary in capacity, indicating the amount of milk they can process in a given time. The SE 15 X is likely designed for small to medium-scale operations. - Materials: Usually made of stainless steel, which ensures hygiene and durability. These machines are designed to withstand regular use in dairy processing. - Easy Operation: Modern cream separators often come with user-friendly controls to adjust the separation process based on the desired cream content. - Maintenance: Regular maintenance is essential for efficiency. This includes cleaning the machine properly after each use to prevent any contamination. - Applications: Besides dairy farming, such separators are often used in cheese production or small-scale creamery operations. Usage: Cream Separator Capacity on Full Skimming : 3000 Litres/Hr Dodpfx Adoxhczdjaocp Capacity on Standedisation: 5000 Litres/Hr Cream Separation: 0.03% Cram Regulation Valve: Included Tools: Included Controls: Supplied with New Control Panel Manuals: Included Condition: Serviced Electricals: 3 Phase 50/60HZ 400 V

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Dcjdjxmi Hqepfx Adajp Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Year of construction: 2011, condition: ready for operation (used), This KEYENCE IM-6020 optical measurement machine was manufactured in 2011. It includes a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6020 optical measurement machine. Contact us for more information. (Two units are available) Application Types Djdpfx Adoxrwgveaecp Measuring

Condition: new, Heidenhain LID 400-0010 scale 01UML0050Z0025 . 232206-18 SN:7827134, unused in opened original packaging, 100% functional, scope of delivery as per photos Dcjdpji Eanwjfx Adasp

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Dedpfx Asw Ebtvodaocp Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability.

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulation, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment = price: 1,000 €, -- Subject to misprints, errors and changes, sample pictures --, More data at: !, More details: ! Dcedpfxjxghu Ts Adajp

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm Dcjdpfx Adsvu Hgboaep - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Year of construction: 2023, condition: ready for operation (used), This KEYENCE IM-8020 optical measurement machine was manufactured in 2023. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-8020 optical measurement machine. Contact us for more information. Dcjdpfx Adoxrwg Nsaop Application Types Measuring

Condition: new, Heidenhain LIP 501C scale ML 420 mm, . 326010-08 , SN:10024213 , unused in original packaging, 100% functional, scope of delivery as per photos Dcjdpfx Adji Eapfoaep

Condition: new, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,350 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Flat loading platform, ABS, air suspension with lift and lower function, axle load scales, total loading platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, access ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking in accordance with regulations, rotary beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp displacement Price: €1,000, -- Subject to typesetting errors, mistakes and changes, sample photos --, More data under: !, More details: ! Dcjdpextp Ubjfx Adaep

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright Dsdpfx Adjw I Eaweaecp - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: ready for operation (used), Year of construction: 2010, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Dedpfx Ajxrwl Sedaecp Application Types Turning

Condition: new, Heidenhain LID 400-0010 scale, . 232206-18 , SN:7828137 , unused in original packaging, 100% functional, scope of delivery as per photos Dcsdoi Ean Espfx Adasp

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loading height approx. 890 mm, 24 x lashing eyes each 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, spring-loaded parking brake, , including axle load indicators, , vehicle hot-dip galvanized, , --  Misprints, errors and changes excepted, sample pictures --, More data at: !, More Details: ! Djdpfx Adoxtp Uzsaecp

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Application Types Measuring Dcodpfx Adsxrwg Ajaep