Used Brass Tubes for sale (2,349)

Condition: new, Brass round tube / in-stock item, sold as a set. Outer diameter: 60 mm Wall thickness: 10 mm Inner diameter: 40 mm Length: 3,000 mm Material: Brass Ms 58/Cu Zn 39 Pb 3 / CW614N Condition: unused / in stock Rsdpfx Asy Urxujbujch Available quantities: 1 x set of 7 pieces 3 x set of 10 pieces 1 x set of 11 pieces Please submit your inquiry with the desired quantity.

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Rodpfxoyh I Uhe Abusch Specifications: Surface Area: 15 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 150°C Tube Side Max. Pressure: 10 bar Tube Side Max. Temp.: 150°C Configuration [Vertical/Horizontal]: Vertical Weight: Actual: Kg550.0 Dimensions: 650 X 3000

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Specifications: Surface Area: 16 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 100°C Tube Side Max. Pressure: 6 bar Tube Side Max. Temp.: 100°C Tube Diameter: 25 mm Rcsdpsyh I Unjfx Abujh Number of Tubes: 68 Weight: Estimated: Kg 690.0

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Rjdpfxoz Ru Ers Abujch Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Rcodsz Ruxljpfx Abush Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Year of construction: 2015, condition: used, This listing is for 2015 Cedrex Fluid X xsd-48 Pro Automated Tube Decapper The unit is in full working condition and ready for immediate use This automated tube decapper is a robust system designed to provide accurate and consistent performance for high-throughput sample management and storage workflows. Manufactured by Cedrex, this reliable unit is an excellent addition to any modern facility processing sample tubes at scale. Rcsdpozqf Hhjfx Abuoh Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Rjdpjv Hxu Uefx Abuoch Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette – Blow off filling nozzle - Fully working condition

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Redpfx Ao Agu D Esbuech Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Rsdpfsfl T T Nsx Abujch Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Rcedpfxezn Rdmo Abujh Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: used, This listing is for Cedrex Fluid X - xtl - CMTL-96 Mark 111 Automated Tube Labeler The unit is in full working condition and ready for immediate use This automated tube labeler is a high-quality lab instrument manufactured by Cedrex (Model: Fluid X - xtl - CMTL-96 Mark 111). Streamlines sample tracking by rapidly and accurately applying durable labels to sample storage tubes. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished) Rjdpfszqf Ekox Abuoch

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Rcjdpfxjzd Hhmo Abujh

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Rodpfx Abjx Rqlfjuoch Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Rcedpjzyv Syofx Abuoh Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Rcsdpfsyr H A Iex Abuoh Inspection and demonstration possible by appointment.

Condition: used, functionality: fully functional, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 42 mm, pipe length (max.): 2,000 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 220 bar, Equipment: documentation/manual, emergency stop, Sommer pipe bending machine for sale Rcsdpe Aazvnjfx Abujh We are selling a Sommer pipe bending machine. The machine is fully functional and can be tested on-site with power, subject to prior arrangement. The original hydraulic unit has been replaced with an external hydraulic unit. If you are interested or have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Rcodpfx Aoz Szfhebush Includes tools.

Condition: used, functionality: fully functional, Year of construction: 1994, Tracto-Technic tube bending machine Model Tubobend Capacity : 42 mm. Rcedpo Afhr Hjfx Abueh Year : 1994 Bending tools : 42 – 38 – 30 – 25 mm. including mandrels

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Rcodsqy E R Tspfx Abush Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Rcodpfsyzyh Dex Abueh Note: The machine is sold without conveyor belt and safety fencing.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-Axis CNC Tube Bending Machine BLM Dynamo – 0 Serial number: 605970300001 Year of manufacture: 1997 Rcjdpfx Abjt R Tgisujh Voltage: 380V 50HZ Machine weight: 1500 kg Control: DOC 85C BLM Bar Loader BLM CARM 7 Serial number: 340040102059 Year of manufacture: 2004 Weight: 405 kg Without conveyor belt Without protective guard TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity, round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity, round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity, round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar loader: BLM Carm 7 (Year: 2004) Positioning speed, X-axis: 2000 mm/s Bending speed, H/Z Y-axis: 500 °/s Rotation speed, Z-axis: 900 °/s Rotation speed, Z-axis: 100 °/s Positioning speed, T-axis: 500 mm/s Measuring tolerance, X/T axis: ± 0.1 mm Measuring tolerance, Y/Z/Q axis: ± 0.1° Maximum reach with maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - ° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control: DOC 85C Ex works Dortmund, free loading onto truck.

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request! Rcsdpfx Abjzklb Eoush

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Rjdpfx Asx E Rdwjbuech Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, Year of construction: 2002, overall weight: 5,000 kg, total length: 7,000 mm, total width: 1,700 mm, total height: 1,700 mm, year of last overhaul: 2026, Equipment: documentation/manual, Based on the following description, here is the machine description in Hungarian: We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Redpo Aarryefx Abuoch Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Rjdpfx Ajwz Ufwobujch Type: Two chucks