Used Turning Tools for sale (39,272)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. Njdsw Hxuaepfx Ah Solh BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° Nedpfx Asxmagush Sjlh rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min number of tapers in turret head 2 x 12 tool taper VDI 25 travel -x axis 170 mm Nsdpfxoxlugmj Ah Sjlh travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Year of construction: 2021, operating hours: 280 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 5000 rpm Spindle motor power 11/22 kW Tool taper A2-6 Number of axis 4 Movement X-Axis Movement 165/195 mm Y-Axis Movement +- 50 mm Z-Axis Movement 700/720 mm Turret Number of turrets 2 Tools Number of index 2x12 Media Chip conveyor Yes Internal cooling Yes Additional Equipment USB interface Three-colour signal light 1 set of soft jaws CHIP CONVEYOR HS with lateral ejection Transformer incl. cable Manual compressed air gun Bar feeder interface // Bar loader interface Nljdpfjxpkn Usx Ah Seh Parts catcher main spindle Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Nodpfexpizgjx Ah Selh Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: good (used), functionality: fully functional, center height: 170 mm, overall weight: 150 kg, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Lathe Manufacturer: KEILWERTH 600 Condition: good Offer type: used machine Technical data: Working dimensions: Center height: 170 mm Maximum diameter: 340 mm Drive: 0.80 kW 400 V Note: Genuine German quality craftsmanship! Very stable and heavy design! Röhm 4-jaw chuck Ø 125 mm, Max. working length: 600 mm, 4 speeds, Nlsdpfx Ahow Adgts Sjh various accessories, Spindle bore: 16 mm Weight: 150 kg The machine is in good and immediately operational condition and can be inspected and demonstrated at our location. We would be pleased if our offer meets your interest. Errors, changes and prior sale reserved.

Condition: ready for operation (used), chuck outer diameter: 3,000 mm, empty load weight: 48,000 kg, Type: SC 33 - Morando-licentie Njdpfev Sfrqjx Ah Selh Tafeldiameter: 3000 mm Maximale zwenkhoek: 3300 mm Maximale werkstukhoogte: 2300 mm Maximale belasting op tafel: 18 ton Vermogen op tafel: 60 kW Tafelsnelheid: 1,02 92 tpm 1e VERTICALE STEUN Ramsectie: 236 x 230 mm Verticale beweging van de steun: 1500 mm 2d VERTICALE STEUN met torentje - 5 posities Verticale beweging van de steun: 1000 mm Max turningdia -- passage: 3300 mm Power on the spindle: 60 kW Digital screen: Axom Evolution 3 Number of speeds: 1,02 > 92 rpm

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L Njdoxmaf Ropfx Ah Sslh greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Njdjgvkpfepfx Ah Solh Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Turret Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Nlodpfoxpktwex Ah Sjh Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Nedpswwvldefx Ah Sjlh Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: used, turning length 1500 mm connected load 108 kVA Nlsdpfexl E Tqox Ah Ssh total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2011, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm turning speeds 15000 U/min c-axis 0,001 ° gripping station 16 mm turning length 80 mm turning speeds 15000 U/min positive location each 0,001 ° number of tools 23 total number of milling stations max. 12 Nlsdoxnqv Nopfx Ah Ssh control Mitsubishi MELDAS Number of axles 7 St. Number of working hours 25150 h total power requirement 3,7 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,1 x 1,7m plus FMB swiss type machine Citizen K1&E-VIIP, built 2011, with FMB Minimag 20 Excellent conditions! Loading in week 48/2025

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing Nledpfxen N D Iwe Ah Sjh protected - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Nljdexpkmqjpfx Ah Soh Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning

Condition: new, weight max. 5,0 t Nedpfxegvwgcj Ah Sjlh workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1730 Measurements depth 2110 Measurements height 1820 Machine weight 4500 Main Drive Spindle speed range 45 - 4500 Spindle motor power 11 kW Movement X-Axis Movement 235 mm Z-Axis Movement 520 mm Workpiece Workpiece drm 390 mm Additional Equipment Hinged belt chip conveyor Some accessories would also be included (see photos) This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe. Application Types Nsdsxpkl Tjpfx Ah Sslh Turning

Condition: new, Technical specifications: Material Thickness: 2mm Internal dimensions LxWxH: 120 x 61 x 58 cm Useful volume: 420 liters External dimensions LxWxH: 122 x 61.5 x 70 cm Height (unfolded): 123 cm Drill Pattern Spacing - Large Hole (25mm): 40" x 18". Drill Pattern Spacing - Small Hole (12mm): 8.4 x 8.4 cm Stacking fork mounts: W12 x H8.5 cm Nodjt U Sckspfx Ah Sjlh Weight: 60kg

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 2500 mm Measurements depth 5200 mm Measurements height 2100 mm Machine weight 5450 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 2–2500 Spindle bore 105 mm Number of axis 2 This FAT TUR MN 710 was manufactured in 2018. A robust horizontal turning machine with a max turning diameter of 710mm and a distance between centers of 3000mm. It supports a max weight of 2000kg and features a spindle bore of 105mm. Ideal for heavy-duty turning operations. Contact us for more information about this machine. Application Types Nodpfxoxirgrj Ah Sjlh Turning

Year of construction: 2013, operating hours: 55,000 h, condition: ready for operation (used), General Data Machine weight 7000 kg Control Unit Brand TRAUB Model TX8i-s Main Drive Spindle speed range 8000 rpm Number of axis 7 Additional Equipment Coolant pump 3 bar / Coolant pump 8 bar Swarf conveyor, hinged belt type H=1000 mm Linear encoder X-axis for revolver top/bottom Fabric filtration for coolant: grade of filtration ca. 30-40 µm High-pressure coolant pump 20 bar CO2 fire fight system Kraft & Bauer Nlsdsxn U D Djpfx Ah Sjh This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CTX 420 Main Drive Number of axis 3 Additional Equipment Chip conveyor Nledpfx Ahjxn Dmus Seh Oil mist separator via mechanical industrial filter, 1500 m³/h Package bar processing G Signal light 4-color Hollow clamping device, Ø 68 mm Lifting beam included This Gildemeister CTX 420 linear was manufactured in 2008. A robust horizontal turning machine featuring HEIDENHAIN Plus iT CNC control, tool drive, C-axis, Y-axis, and a chip conveyor. It includes a tailstock and a tool measuring device. The tool turret was completely overhauled this year. Consider the opportunity to buy this Gildemeister CTX 420 linear horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1440 Measurements depth 2730 x x Measurements height 1620 mm Machine weight 4200 kg Control Unit Brand SIEMENS Model 840D-SolutionLine Main Drive Spindle speed range 4500 Spindle motor power 11 kW/ 16.5 kW Number of axis 2 Movement Nljdpfsxn Dm Ujx Ah Sjh X-Axis Movement 230 mm X-Axis Rapid Traverse 15 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 425 mm Turret Number of turrets 1 Tool taper DIN 69880/30 mm Tail Stock Pinol diameter 80 mm Tools Number of station 12 Media Oil tank 30 liters Additional Equipment Full splash guard cladding + coolant unit Work area light + pneumatic equipment Panoramic window for optimum visibility into the work area This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2015, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1985, condition: ready for operation (used), This 3-axis Schütte SF 26 was manufactured in 1985. It features a pick-off spindle, bar guide, and electronic tapping control, enhancing its horizontal turning capabilities. If you are looking to get high-quality turning capabilities, consider the Schütte SF 26 machine we have for sale. Contact us for more information. Nodpfoxn Dlqjx Ah Selh Application Types Turning

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Njdpfxow U E Tks Ah Sjlh Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2020, operating hours: 16,597 h, condition: ready for operation (used), General Data Measurements width 2130 mm Measurements depth 2880 mm Measurements height 1990 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model 840D-SL Nljdpfx Ahsxnd Irj Seh Main Drive Spindle speed range 5000 rpm Spindle motor power 24 kW Spindle bore Ø65 mm Number of axis 7 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Media Main electronic connection 60 kW Additional Equipment Coolant Tank Volume: Approximately 200 liters Hydraulic Tank Volume: Approximately 120 liters Central Lubrication Unit Volume: Approximately 2 liters Operating Current (IB): 76 A Rated Current of Protection Device (IN): 80 A This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Application Types Turning