Used Twist Drill for sale (5,275)

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg. Bdjdpfx Ajm Rg Npobuji

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 Bdjdjq U Swgepfx Abuei - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Bsdpfx Aettriwjbuodi Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min

Condition: good (used), Machine number: 26798 Type / Model: BS 40 AIII Drilling capacity in steel / cast iron: 50 / 60 mm Bdsdpfx Aoiypmxsbuei Spindle mount: MK 5 Spindle speeds: 32 to 1,400 rpm Feed rate: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total power consumption: 6.7 kW Accessories/Equipment: Thread cutting function, right-hand/left-hand rotation; automatic feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm

Condition: new, Year of construction: 2026, Threading device Quick-release threading device Programmable drilling depth stop Drilling depth and speed display - digital Threading device M30 (dependent on pitch) Opt. R1: Spindle speeds with gearbox, continuously variable, speed range 100-2000 rpm Opt. R2: Spindle speeds with gearbox, continuously variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Bodpod H Rh Rjfx Abusdi Overhang 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-changing 1.5/3.0 kW Weight 420 kg Option: Drilling kit No. 6: Tapered arbor B18/MK 4, quick-change drill chuck B18/3-16 mm, machine vise No. 2-140 and T-slot screws, EUR 910.00 Option: Automatic spindle stop when drilling spindle is at the top, EUR 432.00 Option: Chip breaker module, EUR 432.00 Delivery: Free to your doorstep including packaging (only Germany) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Size of table plate 415 x 385 mm Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: ?machineno=1008-9103760 Bjdpfx Aexabbyjbuodi

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate Bedpfx Ajxabgisbuodi including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 Bodpoxabiqofx Abujdi - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display Bodpsxab Nkefx Abuodi * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Bdodpfou Rv Ukjx Abusi No of Bottom Units: 3

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min Bdedpszmixmefx Abuei weight of the machine ca. 1,1 t

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Bjdezmmt Iepfx Abuodi Max. panel length: 2500 mm No of Bottom Units: 8 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Bdsdpfx Aozmuntobuoi Table adjustment by rack Drill chuck

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: - Length: Various - Diameter: Various - Shank: Various Bdsdpezrybpsfx Abusi - Weight: 12 kg - Application: Woodworking

Condition: good (used), Year of construction: 2007, *Description:* Bodpozvgn Refx Abusdi Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bdsdozvfn Nspfx Abuoi

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request. Bsdpfxozxhgge Abuodi

Condition: ready for operation (used), functionality: fully functional, Union table drilling machine BFT 105 Heidenhain TNC 155 Year of manufacture: 1988 Table load capacity: approx. 4 tons 24 kW spindle: diameter 105 / SK 50 / S2000 Travel distances: 1750 x 1100 x 800 Bedpfxez Ei Uco Abujdi

Condition: excellent (used), machine/vehicle number: 6710, drilling for cup hinges laser pneumatic clamping devices drilling diameter of the central spindle: 0-70mm maximum drilling diameter: 45 mm Bdsdpez D Ai Rsfx Abusi pneumatic head movement mechanism for installing cup hinges rotary head for three spindles in a row 230 V 1.1 KW year of manufacture: 2012 DTR manual – YES CE marking – YES Weight – 42 kg External dimensions: 770x800x800

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 Bdedpfsz Dtxcox Abuei - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2000, Description to follow! Bedpfoz Ebqpex Abujdi

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm Bdjdpfoz Euv Eex Abuei bore stroke 180 mm table surface area 765 x 620 mm

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 734, Drill diameter: 35/40 mm Spindle mounting: MK 3 Spindle speeds in 2 ranges and continuously adjustable: 160 - 2250 rpm Drilling stroke: 140 mm Overhang: 293 mm Drive motor: 380 V, 1.5/1.9 kW Bjdpfx Abjz Divqeujdi Weight: 250 kg Space requirement: 900 x 550 x 1830 mm

Condition: used, Display Model What's Included: - Carrying case Bdodpfx Aozk Ntrjbuei - Unit - User manual - Bit This item is an unused display model Availability: Available shortly Location: Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Bdodpfxjzk Nu As Abuji Year of manufacture: 1997 Condition: workshop-inspected Fittings drilling head Drilling unit: 3/4 spindles Clamping cylinders: 2 Motor power: 0.8 kW Connection: 400/50 volts / Hz Machine dimensions Length 950 mm Width 650 mm Height 700 mm Weight: 80 kg Availability: at short notice Location: Röllbach