Used Universal Dishwasher for sale (3,580)

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° Bjdpfx Asxx A Ncjczjdk NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Bsdpjxw N Uvjfx Aczsdk Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Dishwasher Model: S-Line 3500 + 3-stage filter system Euronorm 500 Bjdpfsfffhysx Aczjdk 3 liters of fresh water consumption Display control 6 washing programs 2 special (extra fresh water and endless loop) peristaltic rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Drain / drain pump electronically Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 680 x 820 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale: 3+2 axis machining center by DMG, model DMU 35 M This machine comes from an educational institute and was primarily used for training in control operation and setup. Note the exceptionally low spindle hours. Technical specifications: Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Bjdpfxex Aiiqs Aczedk Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servomotors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: ready for operation (used), controller manufacturer: AZ-102 - Windows, total height: 3,315 mm, total length: 5,055 mm, total width: 3,745 mm, empty load weight: 8,500 kg, Bewerkingscentrum dat vroeger werd gebruikt voor het vervaardigen van bandenmallen. Gereedschapswisselaar met 24 posities 5 assen tegelijk! Max longitudinal travel X-axe: 1100 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 500 mm Max height workpiece: 580 mm Power on spindle: 2.2 kW Admission in boring head (ISO): F12 Spindlespeeds: 3 - 40 000 rpm Table size: 1700 x 600 mm Table turning angle: 360° Digital screen: ja ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 24 positions Bdodsxuwx Rjpfx Aczjk

Condition: used, Year of construction: 2019, x-travel 900 mm y-travel 550 mm z-travel 500 mm Control FANUC 31i-b tool change unit 30 pos. table-size 1.000 x 500 mm table weight 700 Kg spindle taper HSK - A 63 number of spindle speeds 20.000 U/min/rpm Spindle power 22 Kw Working hours 10.816 h Bdjdpox Ak E Hjfx Aczek Spindle hours 2.352 h Distance between table and spindle 150/690 mm weight of the machine ca. 9 t dimensions of the machine ca. 2.530 x 2.900 x 3.064 m

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) Bjdpsxanrxefx Aczjdk - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, Bodpfx Aoxyinnsczsdk NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: used, Mori Seiki 300 Partner Twin Pallet Machining Centre, serial number 1062 Bdedpfx Asxp Hi Ieczsk

Condition: excellent (used), Year of construction: 2003, operating hours: 48,302 h, functionality: fully functional, Manufacturer: Deckel Maho Model: DMU 70 eVolution Bodpfsxy Nrysx Aczsdk Year of manufacture: 2003 Serial number: 1XXXX (on request) Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle/Production hours: 48,302 h Delivery time: End of January 2026 Equipment / Accessories Control: Heidenhain MillPlus (V530 / 00m) Touch probe: Renishaw MP10 (infrared) Motor spindle: SK40, 18,000 rpm, duty mode 4 Quick Set software (kinematic measurement) Blum laser system for tool measurement and breakage control Tool magazine: 92 positions Tebaron extraction system Internal coolant supply through spindle center, 80 bar Chip conveyor Photos & videos of the machine available via MONTRASIO WhatsApp Business Maintenance and repairs (periodical overview): Annual maintenance by Maschinen- und Industrieservice Ulrich Various repairs of individual components during the entire period due to wear 2022: Overhaul of motor spindle, replacement of guideways on Y and Z axes (€50,000+ investment) 2024: New monitor installed Known defects: Only age-related signs of use Reason for sale: Acquisition of a new machining center Photos & videos of the machine available via MONTRASIO WhatsApp Business

Condition: used, Technical details: table load: 3 t machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Bdedoxz E Exspfx Aczok *

Condition: good (used), DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001-2003 Travel distances X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose to table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Bdodpsxz Rdaefx Aczek Total power requirement: kVA Weight: approx. 1,750 kg Technical data subject to change! Equipment / Accessories: Direct position measuring system for 3 axes Spindle drive via servo motor with toothed belt 2 gearbox stages Full safety enclosure with sliding door Swiveling control panel Coolant nozzles on vertical head Coolant system Chip tray with coolant tank Electronic handwheel Machine feet Machine lamp Interface Serial RS232C, LAN (RJ45) The machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It impresses with its versatility, with the additional manually operated rotary-swivel table allowing 5-sided machining. Available in March 2026 A total of 3 machines are available. Condition: Good to very good from a vocational training center, see pictures

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz Bedpfx Aeghtvasczjdk - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment Bdodpjxv D Uzefx Aczjk

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale: CU 1000 machining center PILOTE TECHNOLOGIES (1998) 1000x500y500z, Fanuc OM CNC, 3 axes plus 4th axis rotary table, year 1998 Bsdpfxexv Ah Ts Aczsdk

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display Bdedpfx Acsxfb Htszsk - Chip guard - Coolant system - Machine light - Chip tray

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Bjdpfx Aswhrfzjczodk Tool magazine for 30 tools, SK 40

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Bedexvrk Rspfx Aczedk Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - CNC control Heidenhain TNC426 - swivable milling head (horizontal / vertical) - NC-rotary table (C-axis) - tool changer for 32 tools - chip conveyor - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° Fräskopf / milling head +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 32 fach Antriebsleistung Spindel 100%ED / drive capacity spindle 100%ED 11 kW Gewicht der Maschine ca. / weight 9000 kg Bsdpfx Acotiw Egjzodk Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Bjdpfsxyx Drjx Aczsdk Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Manual swivel rotary table tool holder vice Accesories Bsdolawavspfx Aczodk

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bodsrb A Tcspfx Aczodk

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Bodpfx Aeit Tr Tjczodk Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Bjdpfx Aswyit Heczodk Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device Bdsdpfjwrzkzox Aczok The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.