Used Unwind Rewind for sale (481)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; Bdedpfx Alsf Ar Exs Uog - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: used, Unwinding reel, reversing reel GSW SCHWABE Type LHD 50/800 Special Double unwinding reel Manufacturer's No. 5775, Year of manufacture approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Support discs Ø 850 mm Guide rings Ø 850 Center of reel shaft to reel base 980 mm - Reel can be manually rotated 180° with locking positions - Central spreading via rotary lever adjustment - Mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg Bodpohubgwofx Al Uodg Good condition

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm Bdjdpfsu Nxa Hjx Al Ueg - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: excellent (used), Year of construction: 2019, Roland SolJet PRO 4 XR-640 Eco-solvent and cut-to-length printer - 1,63 cm wide CISS ink system - ink is about 40% cheaper. The equipment is very little used, is in production and can be viewed / tested. Printing speed up to 49,1m2/hour. It has been designed for high production yet combines all of Roland's unique and innovative applications plus some new ones. Among its main features are quality and speed as well as the ability to achieve metallic shades, printing on transparent materials and a significant colour tone enhancement, making it the world's first utility to use Light Black outdoor ink. The Roland SolJet Pro XR-640 provides quality prints with EcoSol Max2 inks, strong colours with high durability. The ink has a very low odour. Best quality for indoor and outdoor at the most common width. Very high productivity with low maintenance. Maximum material width:1.625 mm; - Maximum print resolution: 1440 dpi; - Variable Droplet with 7 different droplet sizes; - A new generation of EcoSol Max 2, Nickel-free, eco-friendly inks; - Banding-free printing even at high speeds; - Evolved roll feed system; - Take up roll rewind system (works for printing and cutting); - Automatic maintenance & head cleaning system; Bdsdpemcw Twjfx Al Usg - Built-in Heater/Dryer; - VersaWorks RIP Roland; - Variable data printing; - Print time and cost calculation; - New Light Black colour; White and silver ink; - Metallic Colours; Printing & Cutting; - Four different colour compositions; EXW old price 9900 euro - new price 7900 (without VAT in EU)

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Spreading mandrel length: 1500 mm Several units available Frequency inverter control Bdsdoipx Ufjpfx Al Ueg Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown.

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency. Bodpfx Aon D E A Tel Ujdg

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230101, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-950SF ELCOMA wrapping machine described and photographed here. We will be pleased to provide you with the exact specifications for this winding machine by e-mail. Also available via WhatsApp. This is an advertisement for information purposes only. The purchase contract can only be concluded at the specified location of the purchased item. Bjdpfx Ajrvz R Dol Ujdg

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Bdjdpfxotndpzs Al Ueg Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Bjdjtvdy Iopfx Al Ujdg OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: new, Year of construction: 2025, We offer customized conveyor belt solutions, whether chain belt conveyors, apron conveyors, sliding belt conveyors as feeders for baling presses, shredders or as extensions for slitter rewinders. Bdedpfxsq A S Evo Al Ujg Manufactured according to customer requirements, this is a sample offer.

Condition: good (used), Year of construction: 1985, Decoiler for unwinding rolls of sheet, e.g. zinc. Brand: Kader BV Type: Geska 4 Year of construction: 1985 Bdjdpfx Aeqctq Esl Ueg Engine: 0.25 kW Mains voltage: 380 V Rear roller diameter: ± 450 mm Machine is in very clean condition.

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Bdsdetwc Abspfx Al Ujg Just let us know and we have the solution!

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Bdodpfsv Awguex Al Ujg Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Bdedpfx Aov Sddfsl Ujg

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,885 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Arocs 3245 8x4-4 Wiedemann enviro tec, Super 1000 12.0/1.5-320, Water Recycling Unit Superstructure: * Wiedemann enviro tec * Super 1000 12.0/1.5-320 * 13,500-liter tank capacity * 1,500-liter water chamber * 12,000-liter wastewater compartment * Tank emptied by tipping (45°) Vacuum System: * Jurop PR250 Bjdpfx Ajvh H Nvol Usdg * approx. 1,550 m³/h High-Pressure System: * Speck NP 25/70-140 approx. 70 l/min at 140 bar * High-pressure hose reel with approx. 300m DN 32, automatic rewinding system * Hydraulic flushing hose reel with approx. 80m DN 13 Features: * Stainless steel sludge tank, electropolished * Suction and HP boom * Hand washing station * Operator cabinet with display * Radio remote control without display * Equipment cabinet with flaps * Hose tray * Extended sound insulation for pump compartment * Work lights * Central lubrication system Technical Data: * Unladen weight: 15,600 kg * Gross vehicle weight: 26,000 kg * Length: 9,620 mm * Height: 3,885 mm * Width: 2,550 mm Special Equipment: * Axle load measuring system, front axle load 9.0 t * Trailer coupling: Rockinger tow hitch * Audio system: Digital radio DAB/DAB+ * Right exterior mirror with maneuvering position * Battery 220 Ah * Interactive multimedia cockpit * Electrical pre-installation in cabin 24V / 100A * Driver assistance: High beam assist & cornering light * Suspension: Front springs 9.0 t, 3-leaf * Fire extinguisher * 12-speed gearbox, type: G 281-12 * Independent gearbox lock * Rear axle ring gear 485 * 3-piece fenders with splash guards * Fuel tank: 510L aluminum, left * Cooler box/fridge * 2-cylinder air compressor * Reinforced engine brake * Steerable, liftable tag axle 9 t * PTO – smooth flange * Independent and clutch-dependent PTOs MB 1.2 * PTO MB 131-2c * Programmable special module * Wheelbase variant 4300 mm * Rear overhang 1650 mm * Rain sensor * Acoustic reverse warning & external warning beacon * Additional remote control keys (2) * Circuit breaker * Steel rims 11.75x22.5 (front axle) * Socket 24V / 25A in passenger footwell * Additional 24V socket in passenger footwell * Tubeless drop center rims 11.75x22.5 (tag axle, reinforced) * Preparation for 4 surround cameras (display on monitor) * Preparation for extra lights * Passenger seatbelt warning system * Driver and passenger seatbelt warning * Twin-disc clutch * Gearbox oil cooler Additional Equipment: * EURO 6 emission standard * Axle configuration: 6x2 * Actros 5, S/M cab * Heated approach/front mirror * Trailer brake, 2-line system * Connections on left * Trailer socket 24V/15-pin * Exhaust on right side * Two-piece exhaust system * Side-by-side battery arrangement * Rear axle differential lock * Air connection in cabin * Steel air tanks * Condensation monitored air system * Medium air system * Automatic driving light activation (light sensor) * Attention Assist (drowsiness detection) * Autonomous emergency braking (Active Brake Assist 5) * Lane keeping assist * Fixed cab entry step * Hydraulic cab tilting * M ClassicSpace cab, 2.30 m, 320 mm tunnel * Steel suspension, standard * LED outline lighting * Leaf/air suspension * Electric window lifters * Tinted windscreen * No rear cab window * Generator

Condition: new, maximum load weight: 15,000 kg, empty load weight: 1,730 kg, loading space volume: 9.7 m³, total length: 2,300 mm, total width: 700 mm, total height: 6,000 mm, Equipment: cable winch, crane, | Interchangeable body unwinder | 9,7m³ | 6000x2300x700mm | 1720 Kg | New 2 pieces available Sale only to traders. Subject to errors and prior sale. Bdodpfx Alsvh U Nwe Usg

Condition: good (used), Cable reel rack, 5 bays with 3 unwinding levels each, height 3.35m – used - : Price ex-location: €1,500 (net)! Bdsdpfx Aew D Rwhjl Ujg Manufacturer: unknown Type: cable reel rack Year of manufacture: unknown Height: 3.35m Bay width: 90cm 5 bays, each with 3 unwinding levels Condition: good Available: immediately Location: Leipzig (customer could also deliver the rack to branches in Bochum or Augsburg)

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Winch / W 6 I / 6 tonnes / suitable for RTH, TH & HTH 10.10 series / NEW Price: €11,990.00 net / €14,268.10 gross - Max. lifting capacity: 6,000 kg - Working cable length: 27 m - Cable diameter: 12 mm - Cable lowering speed: 19 m/min - Automatic attachment recognition: yes - Winch with homologated, swiveling load hook - Pressure roller and hydraulic end-stop for cable winding/unwinding - Includes metal transport frame This attachment is suitable for the RTH, HTH 10.10, and TH series. Product code: ATT-02-004 We have many other Magni attachments in stock and immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are pleased to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. Bdodpfx Ajykht Esl Uog We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! = More information = New: Yes Application: Construction Please contact Marius Herden for further details.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Bdsdpfx Asykqhfol Usg Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) Bsdpfx Ajwh Shcel Ujdg • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Bdedpewpciyjfx Al Ueg Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Year of construction: 1980, condition: used, For sale: a KENSA MASKIN SA 800 automatic coil unwinding unit, designed for narrow strip, steel coil, and wire. The unit is used and features a robust industrial design. It is powered by an electric motor and designed for the automatic feeding of material into a production line. It is ideally suited for profiling, stamping, rolling, wire processing, and other automated production lines. Bodpfx Alezg Tdmo Ujdg Technical specifications: Manufacturer: Kensa Maskin Model: SA 800 Year of manufacture: 1980 Drive: Electric Maximum coil weight: 500 kg Maximum coil outer diameter: 800 mm Minimum coil inner diameter: approximately 400 mm Maximum coil width: 500–800 mm (depending on the configuration) Automatic material feed Robust industrial design If you have any further questions, we will be happy to answer them.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. Bdjdoy Tlc Depfx Al Ujg - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: good (used), Year of construction: 2016, functionality: fully functional, MPS EF 430/5 FLEXOGRAPHIC LABEL PRINTING MACHINE Machine Overview Manufacturer: MPS Model: EF 430/5 Year of manufacture: 2016 Bjdpfxjy N Tflo Al Uedg Web width: 430 mm Printing technology: UV flexo / water-based flexo Number of colours: 5 UV printing units + 5 water-based drying ovens Condition: Used, professional production machine Availability: Indicative—September / October, to be confirmed Technical Configuration • 5 x UV flexographic printing units • 5 x drying ovens for water-based inks • Web width: 430 mm • Double die-cutting station • One die-cutting station equipped with K&B GapMaster • Cold foil unit on rail system, movable to the required printing unit • Suitable for self-adhesive labels, filmic materials and high-quality label applications Accessories and Equipment • Double die-cutting station • 1 x K&B GapMaster system • Maxcess longitudinal slitting knife unit • Cold foil unit on rail system • BST TubeScan 100% inspection system • ABG Vectra 430 rewinder • UV and water-based drying configuration • Modern MPS EF platform with advanced finishing modules Magnetic Cylinders • Z96, Z160, Z173 Printing Cylinders: • Z 96 13 pcs • Z 100 6 pcs • Z 120 10 pcs • Z 130 8 pcs • Z 140 13 pcs • Z 144 8 pcs • Z 156 11 pcs • Z 160 5 pcs • Z 170 13 pcs • Z 173 9 pcs • Z 182 13 pcs Sleeves • 13 x Z96, 5 x Z160, 5 x Z173 Anilox Rollers • 1 x 100 L/cm – 8 cm³/m² • 1 x 140 L/cm – 6 cm³/m² • 1 x 160 L/cm – 6 cm³/m² • 3 x 160 L/cm – 8 cm³/m² • 1 x 180 L/cm – 5 cm³/m² • 2 x 180 L/cm – 6.5 cm³/m² • 2 x 200 L/cm – 5 cm³/m² • 2 x 260 L/cm – 5 cm³/m² • 2 x 320 L/cm – 4.5 cm³/m² • 2 x 400 L/cm – 4 cm³/m² • 1 x 400 L/cm – 5 cm³/m² • 2 x 500 L/cm – 5 cm³/m² • 1 x GTTL anilox • 2 x GTTXL anilox Application and Advantages The MPS EF 430/5 is a highly attractive flexographic label printing press with a 430 mm web width, 5 UV printing units, 5 water-based drying ovens and an extensive finishing configuration. The machine stands out due to features such as the K&B GapMaster, cold foil unit, BST TubeScan inspection system and ABG Vectra 430 rewinder. Main Advantages: • Year 2016 – modern MPS EF platform • 5 UV printing units and 5 water-based drying ovens • 430 mm web width • Double die-cutting station, including K&B GapMaster • Cold foil unit on movable rail system • BST TubeScan 100% inspection • ABG Vectra 430 rewinder included • Comprehensive tooling package with magnetic cylinders, sleeves and anilox rollers

Condition: used, functionality: unexamined, machine/vehicle number: 205017, Schümann Selekta coil winding machine. Speed: 32–1,250 rpm, winding diameter: 400 mm, winding width: 750 mm. Bedpfoyutiajx Al Uedg