Used Vacuum Lifting Device for sale (32,521)

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Iedpfx Adexuxgvoisa Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Operation via special handle on the vacuum lifter. Lifting movement is infinitely variable by frequency converter Availability: by arrangement Storage location: Hesse

Condition: ready for operation (used), Year of construction: 2000, Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible. Iodoxuvnwspfx Adioa

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg Ijdpfs Rw Nqox Adiea weight: 550 kg height of constuction: 1000 mm

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Iedpfx Ajdzqc Ijdija Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Vacuum lifting device, vacuum lifter Special design as handling device for an industrial robot Year of manufacture 2008 lifting capacity approx. 60 kg suction foot distance min. 120 x 150 mm suction foot distance max. 700 x 600 mm - 4 pieces suction feet Ø 100 mm - 4 pieces vacuum ejectors, vacuum generator PIAB with compressed air connection Ø 8 mm - 2 pieces cross beams, width adjustable via servo drive from 150-600 mm - Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction foot adjustment via 3 pieces servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNN - Very complex and precise construction with linear guides and Trapetz thread spindles - Flange plate for suspension or flange mounting on the robot length: 105 cm, width: 66 cm, height: 54 cm Iedpfx Aod Aii Ujdiea dead weight approx. 120 kg good condition

Condition: used, Vacuum lifting device, FESTO vacuum lifter Custom-made handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction cups Ø 32 mm (designed for 12 pcs) - 16 suction cups Ø 42 mm (designed for 20 pcs) - 5 suction cups Ø 60 mm (designed for 6 pcs) - A few suction feet are missing, see photos - Swiveling main body for suction surface at 90° angle or flat 180° - Main body pneumatically swiveling - Highly sophisticated and precise design with linear guides Iodpfx Adjwywipjija - Flange plate for suspension or mounting to the robot Required space L x W x H: 620 x 300 x 300 mm Own weight: 28 kg Good condition

Condition: new, 15798, TM 23, Oerlikon Leybold THERMOVAC measuring device - New Ijdpfx Aeq S Sp Nediea Model: TM 23 Condition: New

Year of construction: 2016, operating hours: 1,234 h, condition: good (used), functionality: fully functional, The Flexiheffer lifting device uses a pneumatic cylinder to render a load of up to 250 kg weightless and has a working radius of 4 meters around the column (500 mm diameter). Ideal for machine loading. Price includes a 4-meter high column. Iedpfx Adexmf Rxsioa

Condition: excellent (used), functionality: fully functional, Strödter Vacuum Lifter on Rail System Includes 2x Strödter Zybomat ZP 60 adjustable vacuum lifters on Rollyx rail system. Manually movable. Iodpfexwwh Rsx Adiea Line 01: 14,300 mm length Line 02: 7,370 mm length Both with a width of 6,000 mm Lifting capacity is adjustable according to the settings. We have a total of 2 of these vacuum lines for sale at €35,000 per unit. (1 line has already been dismantled). There are also 2 separate vacuum lifters for sale at €6,800 each. One deal for both lines and 2 extra vacuum lifters: €75,000 best price for the full set of 2 lines and 2 extra lifters. Prices exclude VAT and dismantling. Buyers are responsible for dismantling and collection. Youtube videos: These are example videos, not exactly the same models but the same brand.

Condition: excellent (used), functionality: fully functional, DEMAG wheel hub motor 36/24 K6P with FG36 for P2000 P1600 Very good condition, complete with all accessories including control cabinet, pendant floor control panel Iodpowaflfjfx Adiea TOP PRICE!! From a large spare parts warehouse, see also my other offers Info: we have over 20,000 DEMAG items in stock! Check out my other offers from our warehouse inventory as well!

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Iedpfx Adowtxxreioa Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: used, Electric chain hoist crane DEMAG type PK1N-F serial no. 5533406 year of construction 1983 Load capacity 125 kg Hook path 3.8 meters Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length operating cylinder approx. 1.2 meters 1 load line = 125 kg Mains connection 380 Volt, 50 Hz Weight: 25 kg good condition Iedsik Stfopfx Adija

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition Isdpfxsu Swb Uo Adisa

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG model DKUN 1-100 K V1 F4 Serial No. 61801899 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz Isdpfx Ashtr Eyjdiea 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS-control via crane system controller make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V - without crane control - Dematik BUS control via crane system control - without roller trolley Mains connection: 400 Volt, 50 Hz rated power: 750 W rated current: 2,4 A good condition Iodpfx Aegd Ipnedija

Condition: used, Electric chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 lifting capacity 2000 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. Iedpfx Adokwh H Aeisa load strands 2 Cable length control bottle approx. 0,9 meter rated power 1,6 kW / 0,36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eye on the top of the crane - emergency stop weight 75 kg good condition

Condition: used, Electric chain hoist ELEPHANT / FBH (Japan) type F(S)2-A(B4-B6)M(P-G) Serial no.: Year of manufacture: 1997 Load capacity: 2000 kg Lifting height: 2.6 meters Main lifting speed: 3.8 m/min Fine lifting speed: 1 m/min Chain size: 7.1 x 21 / Grade 8 Pendant control cable length: approx. 2.5 meters Power supply: 400 Volt, 50 Hz 2 fall chains = 2000 kg Ijdsvcdv Aspfx Adioa - Emergency stop Own weight: 70 kg in good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type EM 25 Serial no.: 24468 Year of construction 1998 Load capacity: 250 kg Hook path: 3.4 meters Main lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min. 1 load line = 250 kg Cable length operating cylinder: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz Iedpfx Adohpf Ivsiea - Suspension eye on the top of the crane - without trolley Weight: 24 kg good condition

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Iedpfx Adjxcil Soisa Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min 1 load chain

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Load capacity: 125 kg Hook path: 3.8 meters Iedpfx Adjxcil Ejioa Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. 1 load strand

Condition: used, Electric chain hoist, electric lifting unit, crane STAHL Type R 12 Serial no.: 3437532 Year of manufacture: 1979 Iedpfx Aedz Sp Isdija Load capacity: 1250 kg Hook travel: 2.4 meters Lifting speed with single fall: 8 m/min. Creeping speed with single fall: 2 m/min. Lifting speed with double fall: 4 m/min. Creeping speed with double fall: 1 m/min. 2 falls = 1250 kg Motor power: 1.25 / 0.25 kW Power supply: 380 Volt, 50 Hz - without chain container - trolley for KBK 2 – double girder overhead crane Trolley without the 4 KBK travel wheels in good condition

Condition: used, Electric chain hoist, electric hoist, STAHL crane type Si T 201-10/2,5 No.: 1202373 Year of construction 1989 Load capacity 250 kg Hook path = lifting height 3.5 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 2 load lines = 250 kg Cable length operating cylinder approx. 1.4 meters Mains connection 400 Volt, 50 Hz. - Suspension eye on the top of the crane Iedpfx Ajg Rhx Rodija Weight: 22 kg Good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Isdpfegi E Evjx Adioa Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Condition: used, Electric Chain Hoist Crane DEMAG Type PM 8 - Manulift Serial No.: 5319450 Year of manufacture: 1979 Ijdpfxoxcbnls Adisa Load capacity: 80 kg Hook travel: 2.9 meters Distance suspension to load hook: 700 mm Main lifting speed: 12 m/min. Fine lifting speed: 2 m/min. 1 load strand = 80 kg Manulift hand control located directly at the crane hook Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg Iedpfexf Uqfex Adija - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition