Vacuum lifter

Reis 3000/850/H2480 mm

Condition: excellent (used), 13 rolls, Ø 150 mm Lrjdpfxsv S Ad De Aifsp strip width: 600 - 2.000 mm strip thickness: 6 - 15 mm design: 4 hi cassette

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Lrjdpfsfi Tg Hex Aifjp Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Ljdpfx Aow S Tyaoifjrp

Condition: used, Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Lrjdpeh Dm Spefx Aifjp Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Lrsdpfx Aiot Amc Iofjp

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Lrsdpfxorx Sydj Aifjp Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Lrjdpfxed Rg Dpj Aifep Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, Lredopgmqiopfx Aifjp open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben Ljdpjw Dn S Aefx Aiforp

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % Ljdpfor Iyvbjx Aiferp - triple brick offset 25 %