Used Vertical Crusher for sale (7,991)

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, A axis +120/-30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Lrsdpfx Asyt Hd Ijbvsi Siemens 828 control, swarf conveyor

Condition: good (used), Year of construction: 2014, Traverses X Y Z ; 1100mm x 610mm x 610mm. Table size 1270mm x 640mm, table load 1200kgs. Spindle taper BT50, spindle speed 10,000rpm. 30 station toolchanger, Fanuc Oi-MD Ljdpfx Ajyt Hcksbvori

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 762 x 305 x 406mm, Table 1213 x 267mm, Spindle speed 6,000 rpm, Spindle taper BT40, Spindle Motor 5.6Kw Hp, 10 station toolchanger, HAAS Control, Ledpfx Aboyt Hbtoveri low volt light, coolant

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Lredpfxoyt Hbgs Abvsi Spindle taper BT40, 20Hp spindle motor, Spindle Speed 6000rpm, HAAS Control, 20 Station ATC, Coolant

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, Ledjyt E Uxopfx Abvjri table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg Lrodpjyw Inqofx Abvsi

Condition: used, Year of construction: 1994, Bridgeport VMC560/22 Vertical Machining Centre, S/No. 35149 (1994). Country of Origin: United Kingdom with Heidenhain Control, 22 Position ATC, Qty of BT40 Tool Holders Lredpfx Abjyuvyuovoi Location: This lot is located in Burton-on-Trent, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2004, Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, Table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, Travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004) Lrjdpfx Abeyuvt Iovsi Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Lrodpjymawzefx Abvei

Condition: used, Webster & Bennett 36” Vertical Borer, Retro fitted with a Siemens Control, 6 Tool Turret. S/No. 6912-4 Lrodpfx Ajyuvtbobvji Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5260 kg Main Drive Spindle Speed 32000 RPM Spindle motor power 8000 kW Movement X-Axis Movement 760 mm Z-Axis Movement 510 mm Y-Axis Movement 500 mm Ledpfx Asx Hbmlsbvjri This 3-axis VICTORY VC F76 vertical machining center was manufactured in 2021. It features Fanuc Series Oi-MF Plus control, with axis traverses of X-760, Y-500, Z-510, and rapids at 32m/min. The table size is 840x500, supporting a 500 kg workload, and it includes a 24-tool magazine. Machine weight is 5260 kg. If you are looking to get high-quality milling capabilities, consider the VICTORY VC F76 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Lrsdpfxoyindao Abvoi Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Lrjdpfoyucrwsx Abvei Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2012, Traverse X Y Z; 1020 x 560 x 600mm, Ljdpfx Aeypb Dzobvjri table size 1000 x 560mm, table load 1350kgs, spindle speed 16000 rpm, spindle motor 12Kw, rapid federate 40m/min, 24 station ATC, spindle taper BT40, Heidenhain TNC 530I, swarf conveyor.

Condition: like new (used), Year of construction: 2018, operating hours: 170 h, XYZ 500 LR Vertical Machining Centre (170hrs) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Lrodpfx Abeyuga Ssvoi Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79112 Machine Serial Number: SMB0147 Cost: £29,95000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2004, 5-Axis Machining Centre Hedelius RS80 K 2300 Control: Heidenhain iTNC 530 Year of manufacture: 2004 Internal machine no. 12 Total travel paths X-axis: 2,300 mm Y-axis: 800 mm Z-axis: 600 mm Working area, fixed table: X-axis: 925 mm Y/Z-axis: 800 / 600 mm Clamping surface: 1,400 x 750 mm Travel paths, rotary table: X-axis: 780 mm Y/Z-axis: 800 / 600 mm Clamping surface: Ø 800 x 630 mm Taper: SK 40 Lrjdpfx Aoyk Sffjbvji Tool magazine: 30 stations Spindle speed Kessler motor spindle: 50 – 12,000 rpm Equipment: - Handheld control device - ICS with filter system, 500 litres - Chip conveyor - Prepared for 6th axis - Blum laser - 2x extraction units - Machine enclosure

Condition: excellent (used), Year of construction: 2016, 5-axis machining center Hedelius RS605 K -1200 Control: Heidenhain iTNC530 Year of manufacture: 2016 Internal machine no. 11 Travels: X-axis: 1,200 mm Y-axis: 650 mm Z-axis: 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of T-slots: 7 (each 14 mm wide) Feed rate X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Rotary-swivel table: Clamping area: Ø 520 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50 - 12,000 rpm Accessories: Kinematics option Handheld control device Sieve filter unit KM500 Lsdpfx Aeyk S Sxsbvsri ICS 25 bar Chip conveyor Blow-off gun Rinsing gun M&H workpiece probe M&H table radio probe

Condition: used, Year of construction: 2013, DMG DMC 635 V Ecoline Milling Machine with DMG Mori Siemens CNC Control & Hard Wheel, Swarf Conveyor, 3 Axis, 790 x 560 Bed, CAT40 Spindle Taper, 8000rpm, 20 Tool ATC. S/No. 1537000883E (2013) 3850kg. Country of Origin: China Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Lrjdpfsyucp Aex Abvji

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC Machining Centre Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine no.: 8 Lrsdpfx Abjylkydjvsi Travel ranges: X-axis: 2,000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2,500 x 600 mm Spindle taper: SK 40 Tool magazine: 56 stations Spindle speed: 8,000 rpm Accessories: Chip conveyor AME KB 448 Paper band filter AME PS 120 LTA extraction unit Machine enclosure

Condition: excellent (used), Year of construction: 2012, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of manufacture: 2012 Internal machine no.: 5 Travel paths: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping surface: 2,900 x 750 mm Pendulum machining: 2 x 945 x 800 mm Lrjdpfx Aboylid Uovoi Table load: approx. 2,800 kg Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 30 - 8,000 rpm Equipment: Chip conveyor Paper band filter unit Handwheel HR410 Machine enclosure 2x LTA extraction systems Partition wall Pickup magazine for angle heads

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius BC 100-3500 Control: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine no. 3 Travel distances: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Pendulum operation: 2x 1,450 x 1,000 mm Spindle mount: SK 50 Tool magazine: 30 positions Spindle speed: 30 - 4,500 rpm Equipment: - Chip conveyor Ledpfx Aeyk Sdhsbveri - Electronic handwheel - Coolant filtration system - Partition wall - Vetter gantry crane 2 tons - Angular head Benz SK40 with torque support

Condition: excellent (used), Year of construction: 2016, CNC Machining Center Hedelius Forte 7-3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2016 Spindle runtime: 4866 hours Internal machine no.: 2 Travel distances: X-axis: 3,200 mm Y-axis: 750 mm Z-axis: 800 mm Pendulum operation: 2 x 1,300 mm Total clamping surface: 3,620 x 750 mm Table load capacity: approx. 3,000 kg Tool holder: SK 40 Tool magazine: 50 stations Spindle speed: 12,000 rpm Drive power: 29 kW Equipment: - Slant-bed coolant system 900 l - ICS (internal coolant supply) 25 bar - Chip conveyor - 2x rinse gun - Electronic handwheel HR 410 - M&H 3D probe 25.50 - 4th axis prepared - Partition wall - 2x LTA extraction units Ljdpfeyk Arvjx Abvsri

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius T8 – 3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 1 Travel ranges: X-axis F/B: 3,220 / 2,600 mm Y-axis: 800 mm + 65 mm Z-axis F/B: 850 / 1,000 mm Pendulum operation F/B: 2 x 1,300 mm Clamping surface: 3,800 x 800 mm Taper: SK 40 Tool magazine: 98 stations Spindle speed: 50 - 12,000 rpm Enlarged machine table Ledpfsyk Avzox Abveri Equipment: - Internal coolant supply (IKZ) 20 bar - Band filter coolant system 780 l - 3D wireless probing system Renishaw RMP 60 - Chip conveyor - Rinse gun - Electrostatic exhaust air filter - Electronic handwheel HR 410/3+ - Partition - 2x LTA extraction units - Prepared for 5th axis

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Lodpfx Aexd Dgyebvori Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 1,320.9 gal Internal pressure: 96 PSI Lrjdsykn Rdopfx Abvji Jacket Pressure: 95.9753 Material of Construction: Glass lined steel