Used Vertical Dryer for sale (9,135)

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO type DAFL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Bedpjxr N U Eefx Aacelp Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - Without drive, the device is pushed by hand or the machine is pulled by the brush drive Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Very good condition, as good as new - unused - Original packaging

Condition: excellent (used), Year of construction: 2013, CNC Vertical Machining Center WEMAS VZ 1020 QUICK Year of manufacture: 2013 Control: Heidenhain iTNC530 Bjdpfx Aaoxtnhyscslp Technical data: X-axis travel: 1020 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Speed range: 40 – 10,000 rpm Tool holder: SK 40 Table clamping surface: 1100 x 600 mm T-slots: 5 x 18 x 100 mm Number of tool stations: 30 Feeds: Feed rate: 1 – 36,000 mm/min Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min ————— ————— Spindle hours: 3444 h Accessories available Videos available

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Bedowqr S Topfx Aacslp

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: Bedpfx Aasxp Rywocolp -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, operating hours: 1,250 h, functionality: unexamined, machine/vehicle number: FlowFAST V18P, Used Faster-Air FlowFAST V 18 P vertical laminar flow cabinet on base Manufacturer: Faster-Air Model: FlowFAST V 18 P Voltage: 230 V – 50 Hz Work surface: 180 cm x 61 cm x ~75 cm (width x depth x height) Bsdpfx Asxrtvmoacslp With electrically height-adjustable base

Year of construction: 2017, condition: used, New: No Empty weight: 10 kg Part suitable for: trucks Type number: 2591905, 9325102000 R Occ luchtdroger Scania OEM : 2591905, 9325102000 Bjdpfsxr Sywex Aacslp Article nr.: J100006046-veiling Used Scania air dryer

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Condition: New machine Technical condition: New Front tyres type: Solid rubber (bandage tyres) Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber (bandage tyres) Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Blodpoxrwnyefx Aacep Integrated charger

Condition: excellent (used), Year of construction: 2015, CNC machining center MTCUT V 85 Year of manufacture: 2015 Control system: Heidenhain ITNC 530 Electronic workpiece probe Bljdpfx Asxtnhteacjp Electronic measuring probe ICS (internal coolant supply), spindle cooling Technical specifications: Travel paths: X: 850 mm Y: 520 mm Z: 610 mm Spindle nose to table: 150-760 mm Machine table: 1000 x 520 mm Max. table load: 700 kg T-slots in table: 5 Spindle speed: 10,000 rpm / SK 40 Weight: 7,000 kg Request more information

Condition: used, Year of construction: 1999, functionality: not functional, machine/vehicle number: 143826, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, Mazak VTC-20B machine is powered but no longer operational. Bedexrymrspfx Aacslp

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3844 mm Measurements depth 5055 mm Measurements height 3240 mm Machine weight 8880 kg Movement X-Axis Movement 1270 Y-Axis Movement 660 Z-Axis Movement 610 This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. Bodpsxtgkyjfx Aacjlp Application Types Milling

Condition: used, Control: Fagor Faceplate: 5420 mm Bodjvzqm Eepfx Aacolp Turning diameter: 6540 mm Max. turning height: 3500 mm Support (ram) stroke vertical: 1680 mm Support (ram) stroke horizontal: 3250 mm Workpiece weight: 60 tons Machine weight: 190 tons approx. Hydrostatic faceplate

Condition: used, functionality: fully functional, rotary table diameter: 2,000 mm, Table size: Ø2000 mm. Size (L x W x H): 2000 x 1500 x 2200 mm. Weight: 1200 kg. With variable speed. 25° manual tilt Bljdpfx Aoxtaazeacep Vertical welding table for rings, flanges and light work pieces.

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg Blsdpfx Aaexq Hkzscop x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2016, Serial no. 1020802, lot of vending machines - monofilm, transparent +++ Attention: Machine is part of an online auction! +++ Blodext Ngwopfx Aacsp

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Bjdpfjv Iq Ezox Aacolp Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 29,688 h, General Data Measurements width 600 mm Measurements depth 600 mm Measurements height 1350 mm Bjdpjxtgmzefx Aacolp Machine weight 110 kg Main Drive Number of spindles 1 Spindle speed range 20000 Spindle motor power 60.0 - 75.0 kW Number of axis 4 Movement X-Axis Movement 2000 mm X-Axis Rapid Traverse 75 m/min Y-Axis Movement 630 mm Y-Axis Rapid Traverse 75 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 75 m/min Tools Number of index 24 Type of tool holder HSK-A 63 Additional Equipment Nominal pressure: 200 bar Test pressure: 260 bar Temperature range: -10 to 120 °C Bypass opening pressure: 7 bar Differential pressure indicator: 5 bar Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V Maximum switching current: 1 A Switching power: 70 W Protection class: IP 65 Weight: 37 kg This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse speeds of 75 m/min. Consider the opportunity to buy this CHIRON Mill 2000 High Dynamics vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2005, functionality: fully functional, We hereby offer this used Mazak Variaxis 730-5X vertical machining center from 2005, located in The Netherlands. Equipped with a Mazatrol 640M 5X control unit, it offers advanced programming flexibility and precise control. The machine features a working area of 630 x 500 mm, a powerful 30 kW spindle motor, and a spindle speed of 10,000 rpm, enabling efficient machining of a wide range of materials. Renowned for its accuracy and reliability, the Variaxis 730-5X is ideal for industries requiring precision components and optimized cycle times. Included with the Machine: Robot + 12 pallets. 120 BT50 toolholders. Renishaw probe. The machine has undergone a complete overhaul last year: spindle replaced, all ball screws and guideways renewed. Total revision cost: €105,000. Bodpfoxq Hm Ajx Aacjlp Optional: Clamping fixtures (approx. 1 year old) available separately at €2,000 each (12 units in stock).

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm Bjdpfexp Ry Djx Aacslp T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: used, Year of construction: 1998, cutting diameter 1360 mm saw band length 8738x80x1,6 mm cutting width 1060 mm KASTO BBS 1360/1060 block band sawing machine Hydraulic saw blade tensioning, factory-set. Mobile sawing machine for heavy sawing work on large blocks/slabs. Technical data Total drive power approx.: 13kW Saw motor approx.: 7.5kW Max. cutting height with cut monitoring: 1360 mm Max. cutting height without cut monitoring: 1420 mm Cutting height with pressure roller: 1280 mm Min. cutting width: 10 mm Max. cutting width with electromechanical measuring stop approx.: 1000 mm Cutting width without measuring stop: 1060 mm Cutting speed: 14-75 m/min Cutting feed: 0.7-270 mm/min Saw blade dimensions: 8738 x 80 x 1.6 mm or 8738 x 67 x 1.6 mm Rake width: 2.4 mm Saw blade guide: carbide, replaceable and adjustable Bodpoxt Uvkofx Aacelp Saw blade back guide: roller, replaceable Saw blade cleaning: by easily replaceable plastic brushes, motorised Coolant: supplied via two coolant nozzles Pump capacity approx.: 100 litres/min

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Model iTNC-530 Blsdexr Rypjpfx Aacep Movement X-Axis Movement 620 mm Y-Axis Movement 820 mm Z-Axis Movement 650 mm Additional Equipment Optional chucks and open mind license for 5-axis / Approx. 260 HSK63 holders with rack / CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,900 h, Control Unit Brand HEIDENHAIN Model TNC530 Main Drive Number of axis 3 Movement X-Axis Movement 2500 mm Y-Axis Movement 1000 mm Z-Axis Movement 1000 mm Table Table load 6000 kg This 3-axis ANAYAK Performer 2500 was manufactured in 2007. It features a Heidenhain TNC530 control unit, a versatile EMENA-VAR-3 milling head, and a robust table size of 2700 x 850 mm. Capable of handling a table load up to 6 tons, with traverse paths of 2500 mm in X, 1000 mm in Y, and 1100 mm in Z. If you are looking to get high-quality milling capabilities consider the ANAYAK Performer 2500 machine we have for sale. Contact us for more information. Application Types Milling Bjdpfoxr R Awsx Aacolp

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, Control Unit Brand SIEMENS Model 840D Main Drive Spindle speed range 24000 rpm This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Application Types Bjdjxr Rz Hjpfx Aacolp Milling

Condition: ready for operation (used), Year of construction: 2007, Main Drive Bjdpfx Aasxr R Aqocjlp Spindle speed range 22000 Tool taper BT30 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCi Main Drive Spindle speed range 20 to 14000 Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Additional Equipment Infrared measuring probe: Heidenhain TS 649 DMG Cabin roof: Crane loading possible by manually opening the middle roof segment Operating mode 4: Process monitoring during production Replacement spindle 3D quickSET toolkit 4-color signal light Bodpfoxc Rbnsx Aacslp This 5-axis DMG MORI DMU 50 was manufactured in 2016, featuring a robust design with a travel range of X/Y/Z 500/450/400 mm and a rapid traverse of 30 m/min. It operates at speeds from 20 to 14,000 rpm with an inline spindle power of 20.3 kW. The machine includes a 60-position SK40 tool magazine, swivel rotary table for simultaneous machining, and a Heidenhain iTNC 530 HSCi control system. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, Control Unit Bjdpfexr Rztex Aacslp Brand DECKEL MAHO Model Millplus V400 Main Drive Number of axis 3 This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Application Types Milling