Used Vertical Milling Head for sale (22,068)

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle Dwsdpfx Aoznn Hrjizod - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Dedpexf Ur Nsfx Aizswd

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm Dwodpfx Aiov U I Slezsd *

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition Dedpexddwrofx Aizjwd

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Djdpfx Aieu Nlgyezowd Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head *

Condition: used, Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the standard vertical head, driven by the machine gearbox - Drive via a drive pin, centered within the centering diameter - Graduated scale on the flange plate, +/- 45° infinitely adjustable - This keyway milling head is flanged in place of the standard vertical milling head (Mounting in place of the vertical milling head) Djdpfed Dk A Asx Aizewd Weight: 42 kg Good condition Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

Condition: new, 1 brand-new 90° vertical milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, with L-R swivel function, manual tool clamping. Technical data: Spindle mounting: ISO 50 Designed drive power: 22 kW Maximum speed: 3000 rpm Dsdpfx Aisz Dqx Tszswd Overhang: 350 mm Arbor support: Ø 180 mm Outer diameter of mounting surface: Ø 306 mm Head height: 441 mm Weight: 115 kg Accessories / Special features: • Manual tool clamping • The main spindle and all shafts and components are made of case-hardened and tempered chrome-nickel steel • 1 rotatable axis (left/right) • Ground gears • The rolling bearings of the main spindle consist of tapered high-precision rollers • Tool clamping with draw rod Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: VN22049, total width: 1,300 mm, total length: 1,500 mm, total height: 1,700 mm, punching force: 40 t, empty load weight: 2,400 kg, overall weight: 2,500 kg, input voltage: 400 V, A very specialized letterpress model with a vertical base. Can be used for letterpress printing, exhibitions, or for embossing, die-cutting, scoring, and perforating. Comes with numerous operating instructions and lubrication diagrams, as well as spare parts. Dwedpfx Ais Aipf Aszod

Condition: like new (used), 1 unused universal vertical milling head, suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 shank, quill stroke 100 mm, designed drive power approx. 3-4 kW, max. speed 2000 rpm, … Dwjdpfeddtwbsx Aizod Optional accessories: - Multiplier, gear ratio 1:4, ISO 40 shank Price: EUR 499.00 - Attachment for automatic feed device for the vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: EUR 1,880.00 - Cross milling head, additional head for the vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: EUR 585.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Dwedpfx Aiju N E Abjzjd *

Condition: excellent (used), 1 used, partially overhauled vertical milling head with large overhang suitable for drilling machines manufactured by PAMA (origin: Italy) or other manufacturers Spindle mount: SK 50 Overhang: 660 mm Flange size: 465 x 440 mm Inner bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions L x W x H: 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Stepless angle adjustment, manual • 4 fixed indexing points, each 90°, with dowel pins • Tool clamping with tightening rod • For retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, L-R pivoting, manual tool clamping, … The following partial overhaul was performed: - Grinding of the SK 50 tool mount on the milling spindle - Replacement of the bearings in the milling spindle - New shaft seals Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Dwjdpfx Aoz Euydsizjd

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Dwodpfsyn Rduex Aizod Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI

Condition: used, Vertical Milling Machine Droop & Rein type FS130 Travel X: 2000 mm Travel Y: 1000 mm Travel Z: 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation: from 31,5 to 1600 RPM Table size: 2400 x 1070 mm Dodpfsz Nxydjx Aizewd Throat depth: 950 mm Tilt head Spindle motor: 22 kW Scale HEIDENHAIN 3 axes Year of construction: 1976 New electrical panel in 2006 Voltage : 380 V Width : 3500 mm Depth : 4700 mm Total height : 4500 mm Weight : 26 T

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Djdpexk Tzgsfx Aizjwd

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Dwodpfjzlar Uex Aized Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm Dsdpfsu Nc Hksx Aizowd table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Manufacturer: DECKEL Model: FP 4 NC Control System: Dialog 11 Technical specifications: - X-axis travel: 560 mm - Y-axis travel: 500 mm - Z-axis travel: 410 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dwjdpozq Hk Uefx Aizod Accessories, tools, and work-holding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2012, Professional heavy-duty CNC vertical milling machine Republic Lagun VBM 1000-F. Dwedpsz Ahq Hefx Aizsd

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Manufacturer: DECKEL Model: FP 4 NC Control: Heidenhain TNC 355 Technical specifications: - X-travel: 560 mm - Y-travel: 500 mm - Z-travel: 410 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale. Dwodpszq Hllefx Aizod

Condition: good (used), Used MEXIM vertical milling machine with cantilever design Machine for mold makers WIZARD 3-axis display Swivel head Table size: 660 x 360 mm Spindle speed: 20 – 1600 rpm Dwsdpog Np Enjfx Aizod

Condition: excellent (used), Universal Vertical Milling Head This milling head was previously used on a Union TC130 table-type boring mill and is compatible with many other machines. About us: Dwedpfx Aijylg R Eozod MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, as well as control system upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhauls - Control system modernization

Condition: used, Filling and weighing line: “Ishida” Multihead weigher Type CCW-EZ-214/30 Heads: 14 pieces max 50 programs (0-49) Performance: up to max 99 weighings/min Accuracy: average 0 to + 1.0 g Weighing volume: 50-3000 g Display: micro controller display Ambient temperature: 0°C - 40°C Humidity: 35-85% (no condensation) Smallest setting: 0.1g + Vertical flowpackaging line “Rovema” Type VPK260 - 14961 yoc 2005 Performance (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Dodpfx Aij Ah R Shszswd Storage temperature (min. – max.) (°C): -20 … +50 Air humidity (max.) (%): 15…95; no condensation in good condition

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Dedpfx Asz E Sbrjizowd This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2023001552, overall weight: 550 kg, position of the milling head: Vertical, 2-axis A/C fork, total width: 655 mm, total height: 1,373 mm, mount diameter: 335 mm, type of input current: three-phase, torque: 67 Nm, rotational speed (max.): 24,000 rpm, pivoting range: 220 °, spindle motor power: 42,000 W, coolant supply: 50 bar, power: 42 kW (57.10 HP), Equipment: rotational speed infinitely variable, Unused HSD HST810-M two-axis fork head with ES510 electrospindle, HSD article H8099H0048, built 2023, never installed or powered. Supplied new by HSD S.p.A. (Italy) through HSD’s Australian partner in August 2023 and stored since then in its original HSD crates in a locked warehouse in Melbourne. The head is still sealed in HSD’s VCI bag on its steel transport frame (HSD works order OdL 2013060, production number 2023001552). Dwjdpfxs Afb Sts Aizod Head HST810-M: A axis ±110°, C axis ±360°, HSD direct-drive torque motors (A 707 Nm max, C 1,250 Nm max), hydraulic brakes 2,000 / 4,000 Nm, Heidenhain RCN 8380 absolute encoders (EnDat 2.2), 2 arcsec, 180°/s, mass 550 kg, Ø335 g7 machine fitting, overall height 1,373 mm. Electrospindle ES510: HSK-A63, 42 kW S1 / 55 kW S6, 66.8 Nm S1 / 87.5 Nm S6, rated 6,000 rpm, max 24,000 rpm, air-oil lubrication, liquid cooled, hydraulic tool release, Lenord + Bauer 256 pulse 1 Vpp spindle encoder, rotary joint for through-spindle coolant. Included: HSD oil-air lubrication unit CC34250005 (24 V DC) and HSD 3-phase line reactor CCA4050012 (0.4 mH, 130 A), both in their HSD crates, and the HSD installation drawing H8099H0048 with SINAMICS and SIMODRIVE motor parameter sets. Suitable for 5-axis gantry and portal machines for aluminium, composites and light alloys. Siemens-ready; other controls need EnDat 2.2 capable drives. Condition and warranty: unused, 0 hours. The unit is outside HSD’s warranty period and is sold without manufacturer warranty. A pre-shipment run-up test at an Australian spindle service workshop, with written report and video, can be arranged at the buyer’s cost. Inspection in Melbourne by appointment. Terms: price net, FCA Melbourne (Incoterms 2020) in the original crates, payment in full before release by bank transfer or escrow. Export from Australia is subject to an export permit where required; the buyer provides end-user details. Freight, insurance, import duties and commissioning are excluded. Seller: Fleischmann’s Machines Pty Ltd, Melbourne, Australia.

Condition: used, Year of construction: 2015, travel -x axis 620 mm travel -y axis 520 mm travel -z axis 420 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 NC rotary indexing table Ø 650 mm table: swivelling -90 / +110 Grad table load 300 kg Dsdpj Ahzi Eefx Aizjwd numbers of positions in the tool changer 32 tool taper SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to the offer for further technical details. A machine video will be shared on request. Documentation is available! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620