Milling head

Union

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm Kdedpfxsz Aun So Aqiot serial number 1933 weight of the machine ca. 10,5 t

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Kodpfsy Hq Dysx Aqiedt Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Used CNC boring and milling machine Manufacturer: WMW / UNION Gera Type: CBFK 130/2 Spindle diameter: 130 mm Manufacturer: VEB Werkzeugmaschinenfabrik UNION Gera Design: Traveling column boring machine (planer type) Tool magazine available CNC control retrofitted or modernized Weight according to nameplate: 28.3 t Connected power: 80 kW Control: Heidenhain control Technical data Spindle diameter: 130 mm Kodpfx Aqjzffmkeiodt Tool holder: ISO 50 Main drive: 32.4 kW Connected power: 80 kW Spindle speed: up to 3,000 rpm X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,275 mm W-axis spindle stroke: 400 mm B-axis: 360° Clamping surface: 1600 x 2000 mm Table load: 7000 kg/m2 Machine weight: approx. 28–30 t Tool magazine: 60 Year of manufacture: 2007 (general overhaul)

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 420 mm, feed length W-axis: 900 mm, spindle diameter: 130 mm, table load: 15,000 kg, table length: 2,000 mm, table width: 1,800 mm, Union GERA BFP 130 CNC milling machine with Heidenhain 355 control, mechanically refurbished in 2019, in excellent condition, including base plates. Travel in X-axis: 7,000 mm Travel in Y-axis: 2,500 mm Travel in Z-axis: 420 mm Kodpsz Ahqyjfx Aqiedt Table load capacity: 15,000 kg Spindle diameter: 130 mm Table length: 2,000 mm Table width: 1,800 mm Travel of W-axis: 900 mm

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Kdsdpfxsyf Uqts Aqijt Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand Kdodpjy Ipy Ajfx Aqist • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Year of construction: 1994, condition: excellent (used), DIXIE UNION 495-SL ID.NO. 2510 Kjdpfx Aqei Tx Ufsiedt Dixie Union 495-SL slicer with associated output belt year model 1994. Directly taken out of production. Dimensions 370 x 110 H H 200 cm.

Condition: used, Year of construction: 2000, spindle diameter 140 mm x-travel 6000 mm y-travel 2500 mm z-travel 800 mm w- away 700 mm rapid traverse 10 m/min spindle taper ISO 50 control Heidenhain ITNC 430 Plate area 3500x2500 mm rotary table: Rottler type DVT200/2500 30NC 2000 Table dimensions 2500x2000 mm table load 30 t table travel 700 mm 360 ° T-slot - width 28/50 mm T-slot - distance 170 mm Kdjdey Sui Repfx Aqiot number of T-slots 11 Radial face slide 680 mm 170 mm spindle speed: 1600 UPM The control system was converted from an iTNC 430 to a Heidenhain in 1998. 60 tool positions in the magazine 2 controlled rotary tables - 1250 mm x 1250 mm; 1600 mm x 1250 mm - pendulum machining possible - table load approx. 12.5 t SK 50 chuck Various accessories available Video: ?v=XYAtKuGQ578 The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1976, functionality: fully functional, travel distance Y-axis: 3,500 mm, spindle diameter: 125 mm, travel distance W-axis: 800 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 1,800 mm, type of input current: AC, WMW Union BFP 125 - Plate Type Horizontal Boring and Milling Machine, year of construction 1976 Kdedpfx Aqozz Shmeist German-made heavy-duty plate type horizontal boring mill (Plattenbohrwerk). The complete electrical system has been fully renewed. The machine is well maintained and in full working condition. Technical data: - Spindle diameter: 125 mm - Rotary table: 2000 x 1800 mm, load capacity 20,000 kg - Spindle (quill) travel W: 800 mm - Vertical travel Y: 3500 mm - Floor plate dimensions: 9800 x 3750 mm The machine can be inspected under power at our facility in Dilovasi OSB, Kocaeli / Turkey. Price EXW Dilovasi. Loading assistance available.

Condition: used, Controller: Heidenhain TNC 355 X-axis (table longitudinal) mm: 2.780 Y-axis (headstock vertical) mm: 2.425 Z-axis (column) mm: 2.310 B-axis (rotary table): degrees 360° Tool holder / taper: SK 50 (ISO 50) • Heidenhain TNC 355 CNC control • 360° NC rotary table (B axis) • Approx. 40 SK 50 tool holders included, partly fitted with tools • Siemens SIMODRIVE drive package Kjdpfozxwyiox Aqiodt

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. Kdjdpfx Aqoyuql Ejijt total power requirement 25 kW

Condition: excellent (used), functionality: fully functional, ROTARY TABLE BORING MILLS Dear Sir or Madam, Thank you for your inquiry and the trust you have placed in our company. We are pleased to submit the following quotation. Used Rotary Table Boring Mill Union – Ti1800 Clamping Sizes and Other Dimensions: Clamping surface of table: mm 1800x2000 Center bore: mm Ø 100 H6 T-slot width: mm 28 T-slot spacing: mm 160 Ksdsyr Szvopfx Aqiedt Maximum workpiece weight (with uniform load distribution): kg 12,500 Maximum mass moment of inertia of workpiece: kgm² 16,000 Overall length: mm 3,700 Overall width: mm 2,100 Height of clamping surface: mm 920 Maximum loading torque of workholding table: Nm 10,000

Condition: used, Year of construction: 1997, Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg Kdsdszy E Svepfx Aqist

Condition: good (used), CNC FAGOR 8055 Ksdoy Slbkopfx Aqijdt X: 3.000 mm Y: 2.000 mm W: 1.000 mm Speeds: 6–1.200 rpm Taper ISO 50 Roraty table Wotan de 4º axis Surface: 2.000 × 1.850 mm Longitudinal: 2.000 mm Max. weight allowed: 12 toneladas 4 Floor plates 1.500 × 2.500 mm Some accesories Facing head 700 mm

Condition: used, Year of construction: 1987, Technical details: Kodpfeu Utwbjx Aqiedt spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *