Used Vertical Stacker for sale (9,326)

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA brand boring mill (Origin Italy) Spindle taper: SK 50 Accessories / Special features: • 1 rotatable axis (left/right) • Manual tool clamping with drawbar • Suitable for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, swivels left-right, manual tool draw, ... Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Ncsdpfx Ahjyc Nhhszsl

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 8,100 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian pallet stacker Load centre: 600 mm Mast type: Triplex Transmission: Electromechanical Ncedsyczkhspfx Ahzjl Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: HSR Battery type: PzS Battery year: 2009 Description: In addition to this unit, we also offer other forklifts and warehouse equipment. All our machines are workshop-inspected and FEM4.004 certified. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. We are happy to purchase your used vehicle, even if you do not buy one from us. Leasing and financing at attractive conditions available upon request. We will be pleased to offer you competent and detailed advice on our vehicles. Impulse control, full free lift, non-marking tyres,

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 430 h, load capacity: 1,600 kg, lifting height: 2,344 mm, free lift: 1,230 mm, fuel type: electric, mast type: duplex, construction height: 1,670 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian pallet stacker Load center: 600 mm Mast type: Duplex Drive: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 225Ah Battery manufacturer: Hawker Battery type: Gel Nodpsyczkbofx Ahzjcl Battery year: 2018 Description: In addition to this unit, we offer a range of other forklifts and warehouse equipment. All our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or phone; further information is available at hsr-gabelstapler. Naturally, we also purchase your used equipment without requiring you to buy a vehicle from us. Lease-purchase and financing at attractive terms are available on request. We provide expert and detailed advice on our vehicles. Pulse control, initial lift, full free lift, CE certificate, non-marking tires,

Condition: used, Year of construction: 2018, operating hours: 12,678 h, machine/vehicle number: 290060, Weight: 16,800 kg, 48-position tool changer, travel paths (x/y(z): 4 mm, with lubricant processing, chip conveyor, cooling unit, control cabinet. ATTENTION: Collection for this item by prior arrangement only!!! Ncodsycitkjpfx Ahzsl

Condition: used, Year of construction: 2006, machine/vehicle number: 184628, Weight: 7,100 kg, 30-position tool changer, movable T-slot clamping table, MAZATROL 640M control, travel (x/y/z): 1 mm, lubricant processing system, chip conveyor, control cabinet, without machine vises, ATTENTION: Collection for this item only by prior arrangement!!! Ncjdpsycir Tsfx Ahzsl

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Njdpfxjycplms Ahzscl

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Nodpexftkqofx Ahzecl Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Njdpfexwyzyjx Ahzecl Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: used, roll diameter 420 mm Ncodpeyclyaofx Ahzel throat 410 mm saw band length 3150 - 3260 mm saw band width 3-16 weight ca. 600 kg

Condition: used, tank capacity: 150,000 l, GENERAL Equipment: Venting/intake, crane lugs Construction type: upright Remarks: Minor dent in cylinder Outside diameter: 4,000 mm Total height: 11,600 mm Top head: conical bottom Location: external storage Nameplate: Volume: 150,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: food Ncedsyci Alepfx Ahzsl VESSEL Lower head: flat bottom with slope Support design: flat bottom with slope EQUIPMENT Manhole / cover: in cylinder Outlet: present

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Crane lugs Construction type: vertical External diameter: 2,300 mm Overall height: 4,750 mm Location: outdoor storage Volume: 15,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,750 mm Previous application: glue Ncodpoyciz Iefx Ahzjl TANK Bottom: conical bottom Support type: feet Number of feet: 4 pieces EQUIPMENT Manhole / Dome: in top head (DN 500) Outlet: available Outlet diameter: 85 mm

Condition: used, tank capacity: 6,150 l, GENERAL Ncjdpfeycizzsx Ahzol Equipment: Crane lugs Design: Standing Location: External storage Nameplate: Volume: 6,150 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Last application: Clean water TANK Support type: Height-adjustable feet Number of feet: 3 pcs EQUIPMENT Manhole / Dome: In the cylinder Outlet: Available

Condition: used, tank capacity: 6,200 l, GENERAL Equipment: Lifting lugs Design: upright Outer diameter: 1,700 mm Total height: 3,400 mm Max. overpressure: 8.0 bar Location: Outdoor storage Nameplate: Volume: 6,200 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,220 mm TANK Ends: Klöpper head Support type: Feet Number of feet: 4 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: available Outlet: 40 mm MATERIAL PROPERTIES Ncsdpfsyciwcjx Ahzjl Feet material: Steel

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel Njdpsx Twa Isfx Ahzscl 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 21i MB, table width: 625 mm, table length: 825 mm, overall weight: 9,000 kg, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A Ncodjx Tud Repfx Ahzsl CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,710 h, load capacity: 1,450 kg, lifting height: 4,150 mm, free lift: 1,478 mm, fuel type: electric, mast type: triplex, construction height: 1,955 mm, fork length: 1,190 mm, drive type: Elektro, High-lift pallet truck Mast type: Triplex Transmission: Automatic Condition: Refurbished with warranty Technical condition: New Front tyre type: Polyurethane Front tyres condition: New Rear tyre type: Polyurethane Rear tyres condition: New Battery voltage: 24V Battery capacity: 225Ah Ncjdpfx Asv Ezunjhzel Battery year: 2025 Battery condition: New Description: Price includes a new UVV safety inspection. The unit has been factory-refurbished by Toyota, comes with a new battery and matching charger with plug. We are glad to organise low-cost transport for you. Lease-purchase possible! Initial lift, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,436 h, load capacity: 1,600 kg, lifting height: 5,410 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, drive type: Elektro, High-lift stacker Mast type: Triplex Transmission: Automatic Condition: Operational and fully functional Technical condition: Very good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery condition: New Description: Price includes new UVV inspection, new paint finish, suitable charger with plug, new battery (ordered upon receipt of order), electric steering. We will gladly arrange inexpensive transport for you. Lease purchase possible! Ncjdpfx Aovizq Dshzol Full free lift, CE certificate, Electric steering

Condition: good (used), Year of construction: 2018, operating hours: 93 h, lifting height: 1,844 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, mileage: 93 km, Duplex stackerBrand: Still | (Germany)Year of manufacture: 2018Hours: ONLY 93Capacity: 1,400 kgLifting height: 1,844 mmDrive-through height: 1,415 mmInitial lift!Battery: automatic filling systemExternal charger Nedpjx Uzdaofx Ahzocl

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Njdpou E Nwbjfx Ahzscl

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Njdpfx Ahjqhkm Sozecl

Condition: used, Year of construction: 2009, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Siemens ergoline table surface area 2x 790 x 560 mm number of pallets 2 rapid traverse 30 m/min turning speed range 8000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight 5,2 t dimensions 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant Ncedotxctvopfx Ahzsl - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Ncedpfex Irw Rsx Ahzol Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 2,510 mm, fuel type: electric, mast type: simplex, construction height: 1,700 mm, fork length: 1,200 mm, drive type: Elektro, High-lift stacker Load centre: 600 Mast type: Standard Condition: Ready for use and fully operational Ncodpfxjycmzre Ahzjl Technical condition: Good Battery voltage: 24V Battery year: 2020 Battery condition: 80 - 100% Description:

Condition: used, Year of construction: 2008, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control Ultimax Spindle nose - table 150 - 750 mm surface area 760 x 510 mm Nedpjycxkfsfx Ahzjcl spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 24 Pos. Feed ( x / y / z) 7.600 mm/min rapid traverse ( x / y / z ) 35/35/30 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, functionality: fully functional, Year of construction: 2014, 1600 mm open top vertical glass wasching+ drying machine glass thiknss : 3 - 19 mm inlet conveyor : 2 m outlet conveyor : 2 m Nsdpfx Aswwivpehzecl total lenght : 6 m total power : 9 Kw Machine fully fonctional in very good condtion