Used Vibratory Plate for sale (10,976)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm Dksdpfx Aoy I Sp Tepwol minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Manuals and schematics service and instruction books

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Dkodpfx Aporx Sydswel Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: new, Year of construction: 2023, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,050 mm, Technical specifications Cutting capacities: Maximum cutting length: 3100 mm Maximum thickness for mild steel: 10 mm Maximum permissible thickness for stainless steel: 6 mm Overhang: 50 mm Adjustable cutting angle: 1.5 degrees Number of hold-down devices: 16 Hold-down force: 22 tons Adjustable backgauge: up to 1000 mm Speed of the back gauge: 200 mm per second Drive and dimensions: Motor power: 22 kW Oil tank capacity: 200 liters Support arms: 2 pieces Worktable height: 865 mm Worktable width: 580 mm Worktable length: 3515 mm Machine dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm Weight: 9300 kg Total width incl. support arm and safety guard: 3600 mm Equipment features Design with pendulum cut for precise results Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length and number of pieces, including USB connection Motorized backgauge mounted on ball screws with a reach of up to 1000 mm, can be folded up for maximum flexibility Clear control panel on the swivel arm for convenient control Hydraulic hold-down device for optimized cutting results, positioned close to the cutting edge Foot pedal for easy operation Centrally adjustable cutting gap adjustment for different material thicknesses Cutting line lighting for increased precision Large support table with sliding balls for material handling Dkjdsrt Uv Ejpfx Apwol Counter for number of cuts Options for single and series cutting Folding finger guard and side stops for safe working Easily replaceable and resharpenable blades for long-lasting sharpness Adjustable cutting length for efficient processing and minimum material consumption Low-maintenance design with easily accessible oil filling Safety light barriers at the rear of the machine for increased occupational safety Professional customer service Operating instructions in GERMAN and ENGLISH Complies with the current CE safety regulations

Condition: new, Year of construction: 2024, Directly from the manufacturer: Durma SBT 3010 high-performance guillotine shears This machine stands for innovative technology and offers excellent cutting performance that optimizes your production processes. Find out more about the extensive standard equipment and impressive technical data that make the SBT 3010 a must-have for every workshop. Extensive standard equipment: CE certification for the highest safety and quality standards. D-Touch 7 touchscreen control with color display for intuitive operation. Adjustable hydraulic hold-down pressure for optimum material fixation. Precise back gauge with ball screw, adjustable up to 1000 mm. Side stop (L=1500 mm) and two support arms (L=1000 mm) with T-slot and spring-loaded folding stop for optimum material guidance. Table plate with ball rollers for easy handling and protection of the workpiece. Central cutting gap adjustment via handwheel for quick adjustments. Cutting line lighting for precise alignment. High-quality blade set for versatility and durability. Cutting length limiter and piece counter to optimize your production processes. Technical data and performance features: Cutting length: 3100 mm Maximum sheet thickness: 10 mm (mild steel), 6 mm (stainless steel) Dodpferx R E Djx Apwekl Projection in the side stand: 50 mm Number of strokes per minute: 13 Cutting angle: 1.5° Number of hold-down devices: 16 Downholder pressure: 22 tons Backgauge: Up to 1000 mm with a speed of 200 mm/s Engine power: 22 kW Oil tank: 200 liters Number of support arms: 2 Table dimensions: Height 865 mm, width 580 mm, length 3515 mm Overall dimensions: Length 4200 mm, width 2250 mm, Total width with support arm and rear protective grid 3600 mm, height 2100 mm Weight: 9300 kg As a manufacturer, we guarantee you a machine that impresses with its performance, precision and reliability. The Durma SBT 3010 is the perfect solution for companies that want to increase their efficiency and productivity in sheet metal processing

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm Dksdpfx Aoyvflispwol -Sheet thickness: 30 mm -Quantity: 2 mounting plates available Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

Condition: good (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro Dksdpfx Asyu U Dlspwol from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis Dedew I Upnspfx Apwokl - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Dkedpjd Hxx Asfx Apwol Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Dkedpfxjyu Rzgs Apwjl -Mounting plate: with support ribs, on a solid base cabinet -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm -Weight: 1080 kg

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm Dsdpfx Apjyuzcuswokl distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Perforated plate Djdpfx Asfpgp Eepwekl Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Hole diameter 45mm Weight approx. 2.0 tons

Condition: new, Vibratory feeders Deprag ADFS-01811-P/15 / Deprag ADFS-2-1508-1-X Djdpfjy H Ewhsx Apwskl

Condition: good (used), Heating or cooling plate Dimensions: 1.600 x 600 x 50 mm Channels: 6 Table / base: 1.600 x 600 x 820 mm Dodpfx Apelnfhzowskl Use: suitable for filling with hot or with cold water

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,430 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 2,500 rpm, spindle diameter: 150 mm, travel distance W-axis: 1,400 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 2,000 mm, year of last overhaul: 2024, JUARISTI TS5 MG20 boring machine, in perfect working condition, equipped with HEIDENHAIN 530, chip conveyor, enclosure, and milling head. Dkodpfx Apsy Ia Epowjl

Condition: used, Year of construction: 2021, operating hours: 2,725 h, 2021 Rösler Model RHBD 13/18T Overhead Conveyor Shot Blasting System (only 2725 hours) Dedpfx Apoy Am Duswokl 3 Part System. Modern, High-Performance Overhead Conveyor Shot Blasting System Designed For Continuous Surface Treatment Of Medium To Heavy Components. Suitable For Cleaning, Descaling And Surface Preparation Prior To Coating. The System Was Used For Blasting Magnesium Die-Cast Components. With The Same Blasting Media, The System Can Also Be Used For Aluminium Die-Casting Or Aluminium Casting, Brass Casting, E.G, Fittings. The Blast Cabinet Has Four Blast Turbines With Automatic Abrasive Recirculation For Continuous Use Of The Blasting Media. The System Has A Wet Separator. The Overhead Conveyor System Has 18 Rotating Stations To Which 18 Workpiece Carriers Can Be Attached. There Are 14 Stainless Steel Workpiece Carriers On Which Components Can Be Hung. Operating Hours: 2,725. Rated Power: 135 Kw/400v. 6 Blast Wheel Turbine. Rated Speed Per Turbine: 2,500 Rpm. Rated Blast Media Quantity Per Turbine 45Kg. With Circulating Overhead Conveyor, Including Workpiece Carrier, With Wet Filter System. Control System Siemens Simatic HMI. S/No.96410 (2021) Overhead Conveyor Steel System Model RHBD. Shot Turbines Gamma. Gate Width 1,300mm, Gate Height 1,800mm. Pneumatic Gate Operation, 4 Gate Leaves. Safety Monitoring, Swivel Field Gate. Lifting/Lowering Device For Hooks. Wear Protection Plates 10mm Against Turbines And Ceiling. Wall Thickness Of Blasting Chamber 8mm. Filter System 4,000 M³/H. Wet Separator Type RF 800 NS, No. 96411. Conveyor System Freely Configurable. Maximum Hook Load Per Suspension 1,000kg. Workpiece Carriers In The Blasting Cabin Automatically Rotating, Freely Configurable. Recommended Diameter Of Hanging Workpiece Carriers 1,100mm. Recommended Height Of Hanging Workpiece Carriers 1,600mm. 14 Goods Carriers With A Diameter Of 1,000mm And A Height Of 1,450mm Available. Abrasive Return Via Linear Conveyor System And Elevator Conveyor Into The Feed Hopper. Abrasive Supply To The Blast Turbines Through Screw Distributors With Adjustable Abrasive Quantity. Occupational Safety And Explosion Protection Report For Magnesium Processing Available. Dimensions Of The Blast Cabinet Approximately: Width 2,800mm, Length Approximately 10,500mm, Height Approximately 3,500mm. Please Note The Machine Was Dismantled In August 2025.

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed Dkodpfx Asy Azgwjpwsl

Condition: used, (15) Angle plates as detailed. Dkodsyi Tbfepfx Apwol 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t Dksdpfxey Diahe Apwsl dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Djdpfoyymhuox Apwskl Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm Dksdpfexnxnmex Apwjl -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Condition: used, functionality: limited functionality, machine/vehicle number: 08703+05443, input voltage: 200 V, input frequency: 50 Hz, RNA Vibratory Bowl Feeder + Vibratory Linear Feeder + Control Unit Bundle For sale is a used feeding system consisting of: - Vibratory Bowl Feeder RNA SRC-N 400-2L - Vibratory Linear Feeder RNA SLL 400-600 - 2 x Control Units RLC 10-A1/B.7/65.4U The conveying systems were operated in combination (series connection). Individual sale possible. Condition: Fully functional until decommissioning. The lining for oily parts should be replaced. 1) Vibratory Bowl Feeder Manufacturer: Rhein-Nadel Automation GmbH Model: SRC-N 400-2L Serial No.: 08703 Rated Voltage: 200 V ±10% Power Supply / Frequency: 50 Hz Current / Power: 4.26 A / 852 VA Protection Class: IP54 Vibration Frequency: 100 Hz / 6000 min⁻¹ 2) Vibratory Linear Feeder Manufacturer: Rhein-Nadel Automation GmbH Model: SLL 400-600 Serial No.: 05443 Dimensions: 630 × 84 × 103 mm Weight: 8 kg Protection Class: IP54 Connection Cable Length: 1.5 m Power Consumption: 120 VA Current Consumption: 0.6 A Rated Magnet Voltage / Frequency: 200 V / 50 Hz Number of Magnets: 1 Dkodpfjyzcy Nsx Apwjl Magnet Type: WZAW 040 Magnet Color: Black Air Gap: 1.0 mm Vibration Frequency: 100 Hz Number of Spring Packs: 2 Standard Spring Assembly: 2 × 2.0 Total Spring Assembly: 4 × 3.0 Spring Dimensions: 70(56) × 40(18) mm Spring Thickness: 2.0 and 3.0 mm Spring Mounting Screw Quality: 8.8 Tightening Torque for Spring Screws: 12.5 Nm Max. Weight of Vibrating Attachments: approx. 6 kg Max. Track Length: 900 mm Max. Usable Weight: 1.5–2 kg 3) Control Unit (2x) Type: RLC 10-A1/B.7/65.4U No.: T131603 Protection Class: IP54 Mains Voltage: 230 V Rated Voltage: 50–228 V Frequency: 50/60 Hz Power: 1380 VA Current: 6 A Scope of Delivery 1x RNA Vibratory Bowl Feeder SRC-N 400-2L 1x RNA Vibratory Linear Feeder SLL 400-600 2x Control Unit RLC 10-A1/B.7/65.4U Price Package Price: €1,650 net Individual prices for separate sale: Vibratory Bowl Feeder incl. Control Unit: €1,250 net Vibratory Linear Feeder incl. Control Unit: €600 net Location 57439 Attendorn, Germany Notes: Inspection by appointment possible. Used sale. Subject to prior sale and errors.

Year of construction: 1974, condition: ready for operation (used), Working width: 3100mm, usable cutting length: 3050mm, max. sheet thickness: 16mm, stroke rate: 12/min, backgauge range: 10mm-1000mm, throat depth: 300mm, table width: 350mm, max. hydraulic pressure: 280bar, oil volume: 480l. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/2000mm, weight: approx. 6600kg. An on-site inspection is possible. Dodpfsy Ayaisx Apwekl

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 190 mm, side roll diameter: 170 mm, roller length: 2,600 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, overall weight: 2,800 kg, total length: 4,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Dkedpsy H Aytefx Apwol Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending rolls.

Year of construction: 1966, condition: used, machine/vehicle number: 4661, working width: 5050 mm Dodpfsb N Ercsx Apwekl metal sheet thickness: 10 mm power: 30 kW space needed: 2450 x 5600 x 2500 mm weight: 28000 kg

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm Dkjdpfjb N Erbsx Apwjl power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg