Used Plate Developer for sale (12,783)

Condition: used, Year of construction: 2010, Format: 830 x 660 mm Prodpfxoyxquio Alcoa

Condition: used, Cast iron bed Length: 2300 mm Pjdpezwxbfefx Alcera Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Podpfjywziujx Alcsra

Condition: used, Cast bed Podszmxrijpfx Alcsra Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Prjdpfozmxq Eox Alcsa Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Psdpfezmxqxsx Alcjra Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Prodpfezgw D Rex Alcea Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Predpjy Aubujfx Alcea Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg Podewk Rlxopfx Alcjra

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag Predpszwx Tnefx Alcea 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure -20 / 150 deg c design pressure 12 plates E2901 Tag 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM E1958 SL001, E2901 SL001 Part No 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 Prjdpfx Aozw A Suelcja - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Year: 2001 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Prodpfozw E Hzox Alcoa Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 8,000 kg, total height: 370 mm, total length: 5,000 mm, total width: 2,250 mm, plate height: 370 mm, plate width: 2,250 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - RDT MACH-ID 9791 Make: STOLLE Psdpfxszw E A No Alcera Type: RDT Year: 1990 12 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2250mm Height: 370mm No. Of T-slots: 7 Distance from T to T-slot / Jump:320mm T -slot size: 41mm Weight a plate approx.: 8000kg Number of matching pieces: 1 Length: 5000mm Width: 2250mm Height: 370mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 3900kg Number of matching pieces: 1 Length: 3520mm Width: 2000mm Height: 300mm Predpfjzw Ezrex Alcea Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Predjzw Eyzspfx Alcsa Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm Psdpfx Alezn Ahdocora no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: new, functionality: fully functional, UNUSED / new / like new Vibrating table, manufacturer: BERGER Type: BE-1200x1200 Prodpfxevrl Ufs Alcoa Power: 400 VOLT 2x asynchronous three-phase imbalance motors Includes operating manual / documentation! The unit can be inspected at my warehouse by appointment. Shipping and loading are, of course, possible!

Condition: used, Year of construction: 2019, sheet width 6080 mm Prjdpfxezvq Eto Alcja plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Podpeh Uhq Djfx Alcjra Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Pjdpfx Ajfy U Ewolcjra Plate damaged on one side, see picture, otherwise in good condition.

Condition: good (used), HARTGESTEIN measuring and control plate DIN 876/1 with substructure Dimensions: Length: 800 mm Width: 600 mm Thickness: 120 mm Height with substructure: 890 mm Prsdpszati Rjfx Alcsa Accuracy: DIN 876/1

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Prsdpfxezrgy Ss Alcoa Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 Pedpfezi A U Tox Alcjra for KELLENBERGER cylindrical grinding machine Condition: good

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. Prsdozu N Ukjpfx Alcsa In good condition.

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm -Table height: 875 mm -Plate thickness: 30 mm -Flatness: see photos (straightening sheath not included) -Transport dimensions: 4000/2200/H875 mm Psdov E Edmjpfx Alcjra -Weight: 2222 kg