Used Voltage Stabilizers for sale (15,212)

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Maximum negative pressure 2000 Pa Scope of supply: Two filter bags, two chip collection bags Nedpjhk S Sljfx Afwjlf Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ Nedpfx Afohp Rdlswjlf With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard with noise and chip protection curtain at infeed and outfeed Adjustable pressure for feed rollers Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter changes in seconds When the machine starts, centrifugal force automatically tensions the blades – self-locking Blade projection adjusts automatically without the need for setting gauges Nledpfx Afsy Eg Apewsf Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard with electric table adjustment A special lifting system ensures the table position is perfectly maintained even without mechanical locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated outfeed roller Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser 150 mm Drive Performance Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation: Measurements account for maximum travel or usable length. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Working area explanation: Please add stated dimensions to space requirement to obtain the recommended clear installation area for the machine. Thicknessing Thickness table length 630 mm Thickness table width 1000 mm Min. working height 3.5 mm Max. working height 300 mm Min. working length 210 mm Max. cutting depth 8 mm Electrical Data Connection voltage 400 V Phases 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of blades 4 Speed 4,500 rpm Max. planing width 630 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Chip extraction unit Njdpjhk S Stefx Afwolf ASA 7703 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, allowing for extraction from below or above Robust metal fan impeller Comes standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 290 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/Depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Power consumption 4.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5.98 m² Noise emission Maximum sound pressure level 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Maximum negative pressure 2800 Pa Scope of supply: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Nledpfsd Hx Hnox Afwof Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Nlsdpfxjih Dxlj Afwsf Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Nlsdod Hx Hpspfx Afwsf Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine Njdpezii Dzefx Afwjlf - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Nljdpfx Asziiy Njfwjf Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Nsdpfx Afeziixfswjlf Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 12,100 km, power: 140 kW (190.35 HP), first registration: 11/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers competence, service, and advice: Nodpfx Afjzhyu Uewjlf ISUZU M30 H with CTS 04-37 roll-off tipper with remote control PAYLOAD 3,500 kg with a total weight of 7,490 kg or optionally 4,400 kg with 8,500 kg First registration: November 28, 2023 Mileage: 12,100 km VAT can be shown separately. Equipment: - 5.2-liter turbocharged diesel engine with Commonrail direct injection, 140 kW / 190 hp, EURO VI OBD-E (max. torque of 510 Nm at 1,600 – 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button, and the system cleans itself in 20 minutes) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button, and the system cleans itself in 20 minutes) - Automated manual transmission (NEES II) with 6 gears; smooth and precise starting is provided by an integrated torque converter! The gears can also be shifted manually on the gear lever. - Power steering, on-board voltage 24 V - Wheelbase 3,365 mm, turning radius only 6.30 m - Leaf spring suspension at the front (axle load max. 3,100 kg), leaf spring suspension at the rear (axle load max. 6,000 kg) - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) system - Lane departure warning system, emergency braking assistant (AEBS) - Tires 215 / 75 R 17.5 (M + S) - AIR CONDITIONING - Suspended driver's seat, double passenger seat, 3-seater - Electric windows - Electrically adjustable and heated exterior mirrors, electronic immobilizer - DAB+ radio with Bluetooth hands-free system - Digital EG control unit 4.0 (GNNS) - Fog lights, daytime running lights, automatic headlight control - Driver's airbag, headrests - height and tilt adjustable steering wheel, interior mirror - Manually adjustable idling speed - Engine speed control in the cabin - Central locking with remote control - Spare wheel, stored separately Vehicle superstructure: - Telescopic roll-off tipper CTS 04-37 Design according to DIN 30722 Part 3, hook height 900 mm, superstructure CE certified, telescopic hook arm, allowing for various container lengths Operation via control panel with remote control Traction force 4,900 kg Hydraulic locking of the roll-off tipper in the driving position Automatic mechanical hook locking Load-holding valves on all hydraulic cylinders, emergency stop function Auxiliary drive / single-circuit hydraulic system complete with hydraulic pump, oil tank, lines Included additional equipment for the vehicle: Ball hitch, 3.5 t trailer load 1 work light LED at the rear of the cab roof 2 dust boxes mounted on the chassis, made of plastic, lockable, splash-proof Extra package 4 NPR automatic (rubber floor mats, nets for upper storage compartments in the cab, perforated cover for the SCR system, engine cover at the rear of the cab, safety package consisting of warning vest, warning triangle, warning light, first aid kit) Rear lights - protective grilles (galvanized) Wide-angle mirror on the right and left, heated Curb mirror on the right Sun visor for the windshield Rain and wind deflectors for

Condition: used, mileage: 640,000 km, power: 290 kW (394.29 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device in the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control * Lane keeping assist * Navigation system * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Heated seats * Aluminum floor * Loading area inside 8,100 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, middle 315/70 R 22.5 * Only available as a complete unit with trailer Only available with matching trailer: * Front flap for through-loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Manufacturer: Wüllhorst * Loading area inside 7,350 x 2,480 x 2,200 mm * 18,000 kg * First registration 07/2015 * SAF axles * Disc brakes * Air-suspended The price includes the truck and the trailer as a complete unit. Several units available, model year 2015 - 2018. Nedpfx Afjy Trngewjlf Special equipment: Front axle load 8.0 t, Airbag driver side, Audio-navigation system Bluetooth comfort, Exhaust to the bottom right, Exterior mirror right with maneuvering position, Battery 220 Ah, Bi-xenon headlights, Brake connection standard and DuoMatic, Compressed air connection in the cab, Compressed air tank aluminum, Compressed air unit high, Compressed air horn, Windshield tinted with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Air compressor 2-cylinder, Engine PTO front with preparation for Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing warning acoustic (warning signal outside), Switch tail lift, Headlight cleaning system (SRA), Fuse box, Seats in the cab: Driver's seat comfort suspension seat, Sun blind side window, Driver's door, Voltage converter 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), Steel rims 11.75x22.5 (on front axle), 24V socket in the passenger footwell additionally, Preparation CB radio, Preparation cool box / refrigerator, Additional thermal insulation, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Antos, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Driver assistance system: Lane keeping assist, Cab: Width 2.30 m, Cab: Tilting cab hydraulic, Cab: M ClassicSpace, Cab: steel-sprung, Standard, Cab floor with engine tunnel 320 mm, Suspension: Air / Air (full air suspension), Power windows, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 liters, Lift roof manually (steel), Rear axle bevel gear 440, Body / structure: Chassis, Comfort locking system, Fuel tank: 290 liters aluminum, Steering pump unregulated, Lifting system trailing axle, Air intake from the front, Engine 10.7 liters - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger functional seat, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / trailing axle, Socket cab 24V, Tachograph / EG control unit, Underride protection front, Underride protection aerodynamic

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm Nlodpfovcuddjx Afwof * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode Nsdpsvcudkjfx Afwjlf * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: good (used), mileage: 944,786 km, power: 330 kW (448.67 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipper hydraulics - Air horn - Particulate filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Tool box Front axle: Steered; Suspension: Leaf spring Rear axle 1: Lift axle; Steered; Suspension: Air suspension Rear axle 2: Suspension: Air suspension GVW: 26,500 kg APK (Technical Inspection): valid until 11/2026 Technical condition: good Optical condition: good Reference number: 98 Vehicle number: 98 Nljdpfx Afozn Al Aswof Mercedes Benz Actros 2745 / 6x2 / Tipper hydraulics / Steered + lift axle / Eu6 .: WDB9634221L916017 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Rear view camera Steered + lift axle EURO 6 - AdBlue Tipper hydraulics Special equipment: Axle load - measuring device, Ambient lighting LED, Trailer socket 15-pin 7+7-pin, Work light, Audio system: CD radio (Bluetooth), Exhaust outlet downwards to the right, CB radio, Compressed air connection in the cab, Air horns (2) on the cab roof, Suspension: Front springs 7.5 t, 2 leaves, Windshield tinted, Info display 10.4 cm, Cool box / refrigerator, Steering assist pump unregulated, Air intake behind the cab, Air deflector roof (lockable) and side, Engine brake reinforced, Auxiliary drive MB 131-2c, Parameterizable special module, Drawers under the dashboard, Seats in the cab: Driver's seat suspension seat comfort, Sun visor outside, Sun protection roller side window, Driver's door, Steel rims 11.75x22.5 (on front axle), Steel rims 9.00x22.5, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, Carpet covering on the engine tunnel, Fleetboard preparation, Oil cooler transmission Additional equipment: Emission standard EURO 6, Axle configuration: 6x2/4, Axle load front axle 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Exterior mirrors elect. adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab version: StreamSpace, Lifting roof electric, Preparation comfort bunk top, wide, Cab: steel-sprung, Comfort, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Suspension: Front spring seat aluminum, Window lift electric, Parking brake additionally on front axle, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 30 L, Rear axle crown wheel 440, Integral back, Body / structure: Tractor unit, Comfort bunk bottom, Comfort locking system, Communication interface, Fender 3-piece, Fuel tank: 450 L aluminum, Radiator grille, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine compartment encapsulation, Wheelbase 2650 mm, Ramp mirror, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger swivel seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stowage flap outside left, Socket cab 24V, Tacho / EG control device, Door extension for cab, Underbody paneling aerodynamically shaped, Underrun protection front, Preparation toll collection, Front axle curved, Leading axle steerable / relief, Water pump regulated, Registration...

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Nledpfx Afezh D S Rswjf Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D SolutionLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. • Power capacity: 103 kVA • Current (In max): 148 A Njdpfx Aey Ryyrofwolf • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (minimum distance, Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 770 x 520 mm Machine Dimension:. 2050 x 2850 x 2295 mm Machine Weight: 6000 kg Dielectric System Submerged machining CNC Control: LQ33W • Linear Motor Drives (X/Y/U/V) • Glass Scale Feedback System • No Backlash • High-Speed Automatic Wire Threading (AWT) • Ceramic Components • Advanced Corner Control • LAN / Network Connection • Dielectric Cooling Unit • Built-In Voltage Stabilizer • Precision Motion Controller (K-SMC) Nlodoy Tl I Hspfx Afwsf

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Nljdpfezrk Rnex Afwof Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven Nedpfxox Sw N Hs Afwjlf -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: used, mileage: 683,000 km, power: 290 kW (394.29 HP), first registration: 07/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,600 mm, loading space volume: 84 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Frigoblock EK 25 U cooling unit * Driving with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Medium-length driver's cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control Nlodpfx Aotpr Aiefwof * Lane departure warning * Sat nav * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Seat heating * Aluminum floor * Interior loading space 7,700 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, mid. 315/70 R 22.5 Only available as a combination with a suitable trailer: * Front flap for loading into the truck * Drawbar pneumatically extendable * Frigoblock cooling unit EK 25 U * Driving operation with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Wüllhorst make * Internal loading space 7,800 x 2,480 x 2,200 mm * 18,000 kg . EZ 09/2015 * SAF axles * Disc brakes * Air suspension The price includes the truck and trailer as a complete combination. Several trains available, from 2015 - 2017 ---- Special equipment: Front axle load 8.0 t, driver's side airbag, audio system: CD radio (Bluetooth), exhaust pointing downwards to the right, 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in the driver's cab, aluminum compressed air tank, high compressed air unit, driver assistance system: lane departure warning, tinted windscreen with band filter, vehicle without trailer coupling, 150 A generator, 12.7 cm info display with additional display, communication interface, 2-cylinder air compressor, front engine output with Frigoblock preparation, reinforced engine brake, parameterizable special module, acoustic reversing alarm (external warning signal), tail lift switch, automatic circuit breaker, seats in the driver's cab: driver's seat, comfort suspension seat, sun blind for side window, driver's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation for 2nd control unit for level control, preparation for CB radio, preparation for cool box / refrigerator, additional thermal insulation, additional heating (water) Other equipment: Emissions standard EURO 6, axle configuration: 6x2, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, Antos, outside mirror electric. adjustable and heated, differential lock rear axle, driver's cab: width 2.30 m, driver's cab: hydraulic tilting device, driver's cab: M ClassicSpace, driver's cab: steel-sprung, standard, driver's cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric windows, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 litres, manual lifting roof (steel), rear axle crown gear 440, body/structure: chassis, comfort locking system, fuel tank: 290 litres aluminum, unregulated power steering pump, lifting device trailing axle, air intake from the front, engine 10.7 litres - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tires, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, Seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard at the front, stabilizer at the front axle, additional stabilizer, rear axle / trailing axle, 24V socket in the driver's cab, tachograph / EC control device, aerodynamically shaped underbody paneling, underrun protection at the front, preparation f

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Nedsph Uk Nopfx Afwjlf Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: good (used), Weiss Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Nlodpfx Afozg Tn Eswof Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW, Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 51,000 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Vehicle without model lettering, lumbar support for front left seat, electrically adjustable, heated steering wheel, metallic paint, parking assistant package, driver assistance system: parking assistant, driver assistance system: parking aid (side), driver assistance system: rear view assistant, driver assistance system: rear view assistance with emergency braking function (Active PDC), tire repair kit (Mobility Pack), front seat heating, tinted glass (darkened at the rear) * 12V socket in the luggage/cargo compartment (front) * 2 height-adjustable active headrests (front), 3 height-adjustable headrests (rear) * 4 disc brakes (4 internally ventilated) * 8-speed automatic transmission with manual gear selection and gearshift paddles on the steering wheel, automatic with manual mode * Foldable exterior mirrors * Audio remote control on the steering wheel * Electrically adjustable, heated, and body-colored exterior mirrors with automatic dimming function on the driver's side, with direction indicator on the passenger side * Illuminated entry area * Ventilation system with digital monitoring, pollen filter, activated carbon filter, and engine preheating * Brake assist * Collision warning system activates brake lights, drowsiness detection, automatic emergency braking, brakes at low speed (minimum speed for activation: 5 km/h), pedestrian protection, visual/audible warning, function above 130 km/h (78 mph), function above 50 km/h * Black roof rails * Front and rear parking sensors * Electric tailgate closing assistance * Electric drive with lithium-ion battery, range: 0.00, battery voltage: 48.0, battery Ah: 11.0, battery kWh: 0.50, range (miles): 0.00, included kW: 0, number of contract months included: 0 and 0.46 * Electronic stability program * Electronic parking brake * Energy recovery from the engine * Driver airbag (intelligent), passenger airbag with deactivation for passenger airbag (intelligent) * Driver settings for engine characteristics, steering, stability control, and traction control * Driver and passenger seats, individual seats with mechanical backrest tilt adjustment, mechanical longitudinal adjustment, and mechanical height adjustment * Remote-controlled tailgate remote release * Remote control for air conditioning via the Internet, via the telephone, with timer, with heating, and with cooling * Five seats with seat configuration: 2+3 * Floor mats * Powertrain warranty - OEM duration (months) 36 and total mileage (km) unlimited * Battery warranty duration in months: 36, total mileage: 9,999,999 * Electric drive warranty duration (months) 36, total mileage (km) 9,999,999, and total mileage (miles) unlimited Nedpozknraofx Afwslf * Overall vehicle warranty - OEM duration (months) 36 and total mileage (km) unlimited * Luggage securing system * Luggage securing net * Speed limiter * Speed control system (cruise control) * Cup holders for front and rear seats * Separate ventilation control for the passenger side and rear with digital display * Headlights with automatic dusk sensor (automatic) * Rear-wheel drive * Rear window with hinged window and windshield wiper with intermittent function * Hybrid type: Mild-Hybrid * Installed apps * Internal storage/hard drive 320.00 GB * Isofix * Air conditioning with 3 climate zones (fully automatic) * Reconfigurable instrument cluster * Fuel: Diesel * Fuel system with common rail * Flexible luggage compartment cover * LED headlights with ellipsoid diffuser, LED * LED lights for brake light

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures Nlodpszrttfefx Afwsf A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.