Used Wash Out for sale (6,281)

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball Ljdjykkk Hopfx Am Eeaa - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties Laedpfxeykkive Am Eea • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Ljdpfx Ajv Ihgvom Esaa

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Lodpfx Amjxcnxds Eeaa Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Ljdpfx Aodz Dy Hsm Esaa Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated Lsdpfx Aev U A Izjm Eoaa External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres Lajdpfx Aohgh I Som Esa - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: as good as new (ex-display), Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Ljdpeuxuv Ajfx Am Eeaa

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar Laodshl H Uuopfx Am Eea - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: new, Year of construction: 2025, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by means of gear motor, housing of the plant made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 stainless steel wash pumps (Xylem/Lowara), - level control as dry run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank volume: 270 litres Lsdpfx Amof Dy Rwj Esaa - heating: electrically adjustable (RT - 60°C) - Connected load (electrical): approx. 11.5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Lajdpfxouxuwas Am Eoa

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Lasdpfx Aondcbyom Esa

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Lasdpfx Aefl Ufzjm Eja

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Lajdehl H Ubspfx Am Eea

Condition: used, Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 695 mm -Width: 15 mm/height: 42 mm Lasdpfx Amsfbtguj Eea -Price: per pair (left right) -Number: 12x pairs available -Weight: 1.95 kg

Condition: good (used), Hand wash basin with sink, wash basin -Stainless steel sink Lajdpfx Amjb Uhm Re Eja -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Condition: good (used), Drain valve for wash basin -Outer: Ø 80 mm -Inside: Ø 50 mm Laodpfjb Tdazsx Am Eja -Connection: Ø 47 mm -Number: 13x available -Price: per piece -Weight: 0.1 kg

Condition: good (used), Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs Laodpfsv Rq D Ajx Am Esa -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece

Condition: good (used), Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm Laodpfsfbtglsx Am Eea -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

Condition: excellent (used), Year of construction: 2004, Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor Lsdpfx Amor Htm Rj Eeaa -Manufacturer: TGW, Curved roller conveyor ZKRF in-out-KRF with drive -Rolls: Ø 50/77 mm, width up to 410 mm -Speed: 30 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Transport dimensions: 2120/480/H300 mm -Weight: 93 kg with pallet

Condition: used, Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg Ledpfx Asfdkg Hsm Ejaa

Condition: used, Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 820 mm -Width: 15 mm/height: 58 mm -Price: per pair (left right) Laedpjfl Szaefx Am Esa -Number: 1x pair available -Weight: 1.8 kg

Condition: used, Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs Lasdpfx Amjfdkg Do Eea -Length retracted: 700 mm -Length extended: 1280 mm -Width: 14 mm -Height: 38 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg

Condition: used, Standpipe valve for wash basin -Basin depth: 250 mm -Water level: 170 mm Ledjb Uhkyjpfx Am Esaa -Diameter: 60 mm -Number: 26x available -Price: per piece -Weight: 0.3 kg

Condition: used, Standpipe valve 1 1/2" for wash basin Lodpfx Ameb Uhmcj Eoaa -Basin depth: 300 mm -Water level: 270 mm -Number: 37x available -Price: per piece -Weight: 0.4 kg