Used Water Separator for sale (12,590)

Condition: new, Refrigeration unit 14 kW Guodpfx Absxfk Tcs Uek

Condition: good (used), Year of construction: 2018, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 6,000 mm, operating pressure: 4,500 bar, Sunrise Waterjet Cutting SQ6020 Godowyi Uwjpfx Ab Ueuk Fully custom-built model to specification. High-pressure intensifier pump CUX-400H, rated pressure 4,500 bar. Cutting table 6,000 x 2,000 mm over 3 axes. Pneumatic sludge extractor. Abrasive silo. The machine is from December 2018 and was commissioned in February 2019. It is in perfect working condition. This machine cuts absolutely all materials (except tempered glass). Steel cutting capacity over 100 mm thickness. (Cuts stainless steel, aluminum, copper, bronze, stone, tiles, glass, composites, etc.) To fully refurbish, the following is required: cleaning of the cutting tank (approx. €2,800), replacement of the vanes (requires 2 sheets of 3mm 304 stainless steel), and maintenance of the HP pump (approx. €1,500). Dismantling and transport are at the buyer’s expense. Sale due to health issues.

Condition: like new (used), Year of construction: 2022, operating hours: 2,600 h, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, operating pressure: 4,000 bar, Waterjet cutting system by Perndorfer, year 2022, with approx. 2,600 operating hours for sale. Travel: 3050 mm x 1550 mm. 2 cutting heads with dynamic angle correction. Cutting tank made entirely of stainless steel. Includes auger for slurry removal. Includes high-performance drilling unit with 18,000 rpm. Laser pointer; water level regulation. Includes device for cleaning water surface/support during plastic cutting. High-pressure pump 'Servo-Jet-4000' max. 4000 bar at 8.5 liters/min. Includes 3 Lantek Expert Cut licenses incl. postprocessor. Gedpfx Aexy Symsb Ujuk

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Gjdpfoxwy Aqox Ab Ujuk Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Gusdpsxxa T Sjfx Ab Usk

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Technical data sheet available on request Gusdpfx Absx E S Tys Uek

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Refrigerant R401A Guedpfx Absqqhrhs Ujk

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 500 h, machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Gujdpfoqabm Eox Ab Usk Price on negotiation!

Condition: excellent (used), mileage: 100 km, first registration: 07/2010, fuel type: diesel, fuel: diesel, Year of construction: 2010, Technical condition: very good Visual condition: very good Gedpjxp D Egofx Ab Ujuk Please contact Andre, Henri, or Andre for further information.

Condition: used, This listing is for the Grant JB2 Unstirred water bath without lid The unit is in full working condition and is ready for immediate use Guodexhgdvopfx Ab Uek The Grant JB2 series of unstirred water baths are reliable, general-purpose laboratory devices ideal for sample warming, media preparation, and quality control. Available in different capacities and configurations, they are especially suited to educational, clinical, and light industrial use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and ready for operation after retrofit in 11/2025. Certificate: Maximator JET Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clearance height: 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control unit: NUM • Rittal control cabinet on castors • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld remote control • Laser positioning system • Cutting valve MJ 100 • Abrasive head: aJET 3D • CNC abrasive dosing unit with intermediate container • Abrasive storage tank: 1,200 kg with automatic pressure conveying system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water basin with heavy-duty slat supports • Adjustable stops on X and Y axes • Machine precision wedge shoes for levelling • Warranty: 1 year or 1,200 operating hours Price for cutting table with control system ex works, plus VAT: €97,000 • High-pressure pump HYTRON 40.30, 30 kW, year 2006, 28,852 h, retrofit 10/2025 with warranty, new pulse damper with TÜV certification Total price for cutting table with control system and pump ex works, plus VAT: €113,000 Option: • Automatic flushing and sedimentation system: €4,600 Gusdpexw Nn Nefx Ab Ujk Modifications and errors in the technical data and prices excepted. Subject to prior sale.

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/1986, loading space volume: 28 m³, total length: 10,900 mm, total width: 2,500 mm, total height: 2,800 mm, suspension: parabolic leaf (spring), tire size: 385/65 R22,5, Year of construction: 1986, = Additional options and equipment = Gjdpexqyycsfx Ab Usuk - Parabolic suspension - Disc brakes = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Parabolic suspension Unladen weight: 5,800 kg Payload: 28,200 kg Gross weight: 34,000 kg Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Blower for transporting goods from the dryer to the rebler, through the air separator and then onward to packaging. Blower with 7.5 + 11 kW with frequency inverter, additional blower with 7.5 kW optionally available. 3 rotary airlocks at 0.55 kW each. Steel frame for the rebler unit, disassembled for truck transport. Control cabinet for rebler and air separator system with 32 A input current. System has been dismantled. No in-house herb drying anymore. - youtube short: Herb separation, cleaning, air separator for mint, sage, lemon balm. Guodpfxewqfxyo Ab Uek

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Guedpov S Ep Aefx Ab Usk The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: excellent (used), mileage: 100 km, first registration: 07/2007, fuel type: diesel, fuel: diesel, Year of construction: 2007, Technical condition: good Godpjxp D Eaefx Ab Ujuk Visual condition: very good Contact Andre, Henri or Andre for further information.

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Gedpfxsxhfpdo Ab Usuk Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Guedpfx Aet E Hmreb Ujk Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 12 bar, operating pressure: 12 bar, overall weight: 2,000 kg, compressed air connection: 6 bar, Equipment: documentation/manual, RIEFILT Ultrafiltration System UF 25/10 – 25 m³/h High-Performance UF for Industrial, Process & Drinking Water Compact, fully automatic ultrafiltration system for the treatment of river, well, or process water with a capacity of up to approx. 25,000 l/h. The UF 25/10 reliably removes suspended solids, bacteria, microorganisms, and colloids, providing consistently clear filtrate—ideal as a stand-alone treatment unit or as a high-quality pre-treatment stage for RO systems. Typical Applications - Process water treatment in industry and commercial sectors - Filtration of river, surface, and well water - Premium pre-filtration for reverse osmosis systems (extends RO membrane service life) - Drinking water purification for industrial, municipal, or containerized solutions - Recirculation and polishing of industrial and rinse water Wherever secure water quality, high availability, and stable operating costs are required, this system excels. Technical Specifications (Summary) - System type: RIEFILT UF 25/10 - Capacity: up to approx. 25 m³/h raw water, approx. 23.5 m³/h nominal capacity - Membranes: 10 × PVDF ultrafiltration modules - Operating pressure: approx. 1–3 bar (energy-efficient low-pressure operation) - Temperature range: approx. 0–40 °C - Power consumption: approx. 12.5 kW (base), approx. 15 kW incl. CIP module - Design: Stainless steel skid, industrial-grade piping and tanks - Designed for automated continuous operation, containerized, and modularly expandable System Concept & Operation - Pre-assembled skid system—plug & play, quick integration into existing setups - Automatic backwashing and CIP cleaning for minimal downtime - Freely programmable control, user-friendly operation, and clear process visualization - Low chemical consumption, optimized membrane lifespan, robust industrial construction Benefits for the Operator - High operational reliability: stable filtrate quality even with fluctuating raw water quality - Reduced OPEX: energy-efficient operation, automated cleaning, minimal personnel requirements - Flexible integration: as a stand-alone solution or high-end pre-treatment stage for RO / further processes Guedpfx Abewnbxds Uok - Future-proof: ideal for system expansions, container concepts, rental or multi-line solutions If interested, I am happy to provide the detailed technical datasheet, layout drawings, and a customized offer tailored to your application, including pricing and delivery terms. Please contact me directly via Machineseeker for further information, project discussions, or to arrange a viewing.

Condition: good (used), Lohberger Stove Oven Water Bath Brainmarie Salamander Gusdpfsxqyfxjx Ab Ujk Water Bath E.WS09EBM2.1 (2.3 kW) 4-Burner Stove E-4/850 (17 kW) 2-Burner Stove E-2/850 (6.8 kW) Oven eloma SA1 Salamander (2.1 kW) Faucet Dimensions: Width: 2250 mm Depth: 850 mm Height: 750 mm Backsplash: 60 mm Hotplates: 300 x 300 mm Water Bath: 510 x 610 210 mm Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Baader 697 Bone Separator Guedpfew Ennasx Ab Ujk Stainless, 1200Kg raw material per hour, 3mm diameter drum, mobile, 3Ph

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission Godpfsg N Nlvex Ab Usuk iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: refurbished (used), 90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ length: approx. 13.500 mm diameter: approx. 3.000 mm weight: approx. 11.000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection Gujdpfx Abshh Stgo Uek - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: excellent (used), Water cooler with refrigeration compressor Gsdpsva Eawofx Ab Ujuk Make DALEX TYPE ES 1 cooling capacity 870 W with connection cable and mains plug for 230 V 50 Hz connection suitable for resistance welders up to 40 kVA rated power

Condition: good (used), Lohberger Food Serving Unit Dimensions: Width: 2100 mm Depth: 850 mm Height: 800 mm Height with glass shelf: 1170 mm Depth with tablet shelf: 1180 mm Basins: W x L x D 300 x 510 x 200 mm Water supply via water connection on the basins Find more items - new and used - in our shop! Godpfx Ajxqx Rgeb Ueuk International shipping costs upon request!

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single-walled, 1 manhole DN 600 with blind cover incl. gasket and screws, bitumen insulation on the outside - second-hand tank volume: 120.000 liters / 120 m³ length: approx. 16.500 mm diameter: approx. 3.100 mm Guedpfxofn Rdds Ab Uok weight: approx. 3.100 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 100.000 liters.