Used Waterjet Sweden for sale (253)

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid, Sweden Model: 1521 Dimensions of the grinding chamber: 210 x 160 mm Iiodpfxoztfins Abpef Power: 2.2 kW New blades 9 rotor blades 2 stator blades Additional blades and screen

Condition: used, mileage: 769,300 km, power: 290 kW (394.29 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1840 ANTOS - Leaf/Air - M Classic Space - Air Conditioning - Retarder - Good Condition * Chassis Number: WDB96340310XXXXX - First Owner - German Vehicle - * Diesel - Displacement: 10,677 cc - 290 kW / 400 hp - Euro 6 - Green Sticker - * Tire Sizes: Front Axle: 315/70 R 22.5 Rear Axle: 315/70 R 22.5 * Vehicle immediately available and ready for pickup - * Please arrange an appointment to view the vehicle - * Contact Person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. Iisdpfexgldfex Abpsf * Subject to changes, errors, and prior sale. Special features: Work lights, audio system: CD radio, exhaust facing down to the right, 220 Ah battery, compressed air connection in the cab, aluminum compressed air tank, additional compressed air tank, electrical preparation in the cab 24V/100A, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, 10.4 cm info display with additional display, integral rear, communication interface, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, retarder, fifth wheel coupling, low-maintenance, automatic circuit breaker, seats in the cab: driver's seat with comfort suspension, voltage converter 24V/12V 10A, additional 24V socket in the passenger footwell, preparation/switch for lifting axle on the semi-trailer/trailer, CB radio preparation, additional heating (water), transmission oil cooler Further features: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Antos, exterior mirrors electric. adjustable and heated, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting system, driver's cab: M ClassicSpace, driver's cab: reinforced (Sweden), driver's cab floor with engine tunnel 320 mm, suspension: leaf/air, suspension: aluminum front spring bracket, suspension: 7.5 t front springs, 2 leaves, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown gear 440, body/structure: semitrailer tractor, comfort locking system, 3-part fender, fuel tank: 390 L aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard front, stabilizer front axle, 24V driver's cab socket, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle offset, water pump regulated, permissible total weight 18.00 t

Condition: used, Bruks RR 700 butt end reducer Iiedpfezrfakex Abpef Technical data: Log length: 3.0 to 6.2 meter Max log diameter: 700 mm Max rootflares: 180 mm radial Capacity: 2 - 7 logs/ min

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,521 h, load capacity: 2,000 kg, lifting height: 2,090 mm, mast type: duplex, battery model: Exide, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,150 mm, total height: 1,600 mm, total length: 2,100 mm, total width: 800 mm, Equipment: pallet forks, We offer a Atlet PDP200 from 2016 which is in good, reliable working order. The Atlet PDP series is known for its durable construction. The forklifts have left 4521 hours. Thanks to the machine's initial lift (retractable support legs) It handles uneven surfaces, ramps, and thresholds with ease, and is designed to handle two pallets at once for maximum efficiency. The model is equipped with a fold-down ride-on platform and protective side rails, making it perfect for both short and long-distance transport within the warehouse. Technical Highlights & Features: Capacity: 2,000 kg (2.0 metric tons) Lifting height: 2,090 mm (2.09 meters) Ijdezmtppopfx Abpjif Driver Environment & Ergonomics: A foldable, cushioned ride plate and sturdy side guards provide the driver with a safe and comfortable working environment, even at higher transport speeds. Battery: Equipped with a brand-new battery A 24V 400Ah battery from Exide, which guarantees maximum uptime and many years of trouble-free use to come. The corresponding charger is, of course, included. A safe and economical investment that is ready for immediate delivery.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,339 h, load capacity: 2,000 kg, lifting height: 150 mm, fuel type: electric, battery manufacturer: Exide, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,150 mm, total height: 1,200 mm, total length: 1,900 mm, total width: 750 mm, Equipment: pallet forks, BT LPE200 (2016) in good condition We are selling a 2016 BT LPE200, designed for heavy-duty pallet handling, loading, and transport. The forklift has logged approximately 4,339 hours and is available for immediate delivery. Isdpfxszmr N Us Abpoif Specifications & Features: Capacity: 2,000 kg. Battery: New 24V 400Ah lead-acid battery from Exide. Charger included. Driver's environment: Equipped with a cushioned, fold-down footplate and fold-down side gates for the driver's safety. Format: With the load deck raised and the gates retracted, the truck is designed for work in tight spaces and on truck beds.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, total height: 4,100 mm, total width: 5,800 mm, overall weight: 2,100 kg, product length (max.): 7,500 mm, number of axes: 3, This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details. Iiodpfx Aozh Itxsbpof • Max worktable size: approx. 4,150 × 2,080 mm • Cutting system • Technology: Abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Max cutting thickness: up to 220 mm (material dependent) • Interpolated CNC cutting for complex shapes • Automatic Z height control • Axes and motion • CNC controlled axes: X, Y, Z • Motors: Brushless • Guides: Recirculating ball linear guides • Drive system: Rack & pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Waterjet pressure system • Maximum working pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: High-pressure intensifier pump 30 CP included; see Additional equipment • Control and software • CNC control: OSAI Open • HMI: CMS Active interface • CAD/CAM: EasyCut / EasyPump compatible • Touchscreen control panel on mobile stand • Worktable and load • Material support: Steel grid table • Max table load: approx. 500 kg/m² • Electrical and utilities • Power supply: 400 V / 50 Hz / 3-phase • Installed power: approx. 35–40 kVA (configuration dependent) • Protection class: IP54 (control cabinet) • Safety and equipment • Safety guards and photoelectric barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for cutting head • Laser pointer for zero-point setting • Electrical cabinet and control console Additional equipment • High-pressure intensifier pump (30 CP) • Abrasive feeding system (270 kg capacity) • Air compressor

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Iijdjwdihrepfx Abpsf

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Iiedpoikvlijfx Abpef Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, mileage: 411,000 km, first registration: 05/2019, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, parking heater, Air conditioning, Classic Space cab, tinted windows, multifunction steering wheel, cruise control, underrun protection not present, front axle with air suspension, raised exhaust system (behind cab), main fuel tank left - additional tank left, air-suspended driver’s seat, radio, reversing camera, manual air conditioning, exterior sun visor, electric windows for driver and passenger, rear axle air suspension, axle configuration: 4x2 - front axle load 8.0 t, trailer socket 24V / 15-pin, Antos - exhaust to the right outside, electrically adjustable and heated exterior mirrors, electronic brake system (EPB) with ABS + ASR, rear axle differential lock, steel air reservoir, medium compressed air unit, driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, driver assistance system: Stability Control Assist, cab: mounting height 600 mm - cab width 2.30 m, cab: hydraulic tilting device, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with 170 mm engine tunnel, cab variant: ClassicSpace, suspension: air/air (full air suspension), electric windows, tinted windscreen, alternator 100 A, speed control system (cruise control), 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual roof hatch (steel), rear axle crown wheel 440, integral rear, comfort locking system, three-piece mudguard, fuel tank: 390 L aluminum, unregulated power steering pump, engine brake, engine compartment encapsulation, ramp mirror, spare wheel, residual heat utilization, fifth wheel coupling: manually lubricated, fifth wheel coupling: standard, Mercedes-Benz PowerShift transmission, disc brakes front and rear axles, passenger functional seat, front splash guard, external left storage compartment, 24V socket in cab, tachograph / EC control unit, aerodynamically shaped underbody paneling, front underrun protection, toll recording preparation, cranked front axle, controlled water pump, central locking with remote control, permissible total weight 18.00 t, emission standard EURO 6, driver’s side airbag, audio system: CD radio (Bluetooth), battery 220 Ah, compressed air connection in the cab, driver assistance system: distance control, driver assistance system: Attention Assist (fatigue detection sensor), cab: M ClassicSpace, info display 12.7 cm with video function, air conditioning, fuel tank: low profile, fuel tank: narrow profile, air intake behind cab, two-stage air compressor, engine 10.7 L - 290 kW inline 6 diesel (OM 470), fog lights with LED, daytime running lights and cornering lights, wheelbase 3700 mm, acoustic reversing alarm (external warning signal), fifth wheel coupling: mounting height 150 mm, lower sleeper berth, circuit breaker, seat cover/upholstery: driver’s seat velour, seats in cab: passenger seat with armrest, seats in cab: comfort swing driver's seat, seats in cab: fold-down backrest on driver’s seat, exterior sun visor, steel rims 9.00x22.5 (rear axle), additional 24V socket in passenger footwell, reinforced steel front bumper corners, pre-installation for reversing camera, seat belt warning system, auxiliary heater (water, ABS, differential lock, auxiliary heater, cruise control, spoiler package, disc brake, on-board computer). Ijdoyf Szpjpfx Abpjif

Condition: ready for operation (used), Disc chipper with horizontal feed work type Bruks 1503M with chip screen type Bruks BS3. Iedpozrd T Nefx Abpsif Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: ready for operation (used), Log intake with debarker. Below parts included: Iodpfezrdn Hjx Abpoif - Log deck with steep-feeder - In-feed conveyor - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker - Conveyor for bark

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Emergency stop switch. Runs in both left and right directions. Table dimensions: 660x560mm Maximum drilling depth: 150mm Drilling depth is adjustable. Head and table are height-adjustable. Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Iisdpfx Abszfqz Tepef Contact us for shipping options! €2,500.00

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1100-WTBTB Ijdpfx Aboznlxropoif The Series 22-1100-WTBTB, with a passage width of 1100 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, waterjet-cut, or plasma-cut parts thanks to its 3 stations. The belt grinding station allows for the removal of burrs and raised edges. Subsequently, the edge is deburred and slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for the belt and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Clean water tank: approximately 152–175 l, depending on the version Water recirculation system: approximately 250 l Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price. Iijdpfsy U Nidsx Abpof

Year of construction: 2002, condition: excellent (used), ABB IRB 140 Country of manufacture: Sweden Year of production: 2002 Reach: 800 mm Ijdpfepuz Dyox Abpeif Control: M2000 Load capacity: 6 kg

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Robot weight: 140 kg Iodpfx Ajqffhhjbpsif Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Condition: used, Year of construction: 2012, functionality: fully functional, MBM ASAS ME Pump cleaning system for Abrasve Waterjet machines Iodezh U Naspfx Abpjif Used - construction Year 2012

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Iodpfx Abezk Dfpopsif Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: excellent (used), I am offering a used Atlas Copco Cobra PRO petrol-powered hammer. The unit is from 2014 and was manufactured in Sweden. The Cobra PRO model is a professional petrol-powered hammer designed for construction, roadwork, and demolition applications – it does not require electrical power or a compressor, making it ideal for outdoor use. The visual condition is as shown in the pictures – with normal signs of use, scratches, and scuffs. It is equipped with a working chisel. Specifications: Manufacturer: Atlas Copco Model: Cobra PRO Year of manufacture: 2014 Iedpszkwdlofx Abpsif Country of manufacture: Sweden Engine: 2-stroke petrol engine Application: concrete and asphalt breaking, roadwork, and earthmoving Mobile design – does not require a compressor or mains power.

Year of construction: 2001, condition: good (used), Item: A-01537- mixer tank 4000L Rectangular mixer tank with insulation and connection for heating/cooling tank, Capacity 4.000 L, Stainless Steel quality AISI316, Insulated, man-way at top, double jacket press 3 bar, working temperature 95 C, Ijdpfeh A Hb Rex Abpjif agitator inside from top. Brand Food-Tech Sweden 2001. 2 pieces identical!

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Iijdpfx Abezg N E Hepof Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Iiodpfx Ajzg N Dijbpsf Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. Iodpfjy Au Hqjx Abpjif The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Isdpeygmhtofx Abpeif

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, number of axes: 5, This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Additional equipment • Smart Abrasive Reserve Tank Included • Tank Capacity: 350 kg • Tank Pressure: 6 bar • Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Machine Benefits Technical Machine Benefits • Axes: 5-axis waterjet cutting machine • Cutting size: 4000 × 2000 × 250 mm • Type: cnc 5-axis, bridge type • Step accuracy: 0. 01 mm • Controller: esa 5-axis controller with ethernet, usb, and manual handwheel (x/y/z) • Cam program: semi-automatic nesting / automatic input-output system • Rapid traverse speed: 30000 mm/min Extra Information Condition: Very good technical condition, low number of working hours Movement Axis Motors: X-axis: 1 × 3.2 Nm servo motor Y-axis: 2 × 3.2 Nm servo motors Z-axis: 1 × 1.6 Nm servo motor with brake A-axis: 1 × 1 Nm servo motor with brake C-axis: 1 × 1 Nm servo motor with brake Transmission System: Helical hardened racks and pinions Linear Bearing: THK linear slides and rails Injection Unit High Pressure Pump: MJT-4000 Operating Pressure: 4000 bar constant (24h non-stop) Motor: 50 HP / 37 kW, 1500 rpm, 50/60 Hz High Pressure Flow Rate: 2.3–3 L/min Pressure Adjustment: 1000–4000 bar in 500 bar steps Isdpjzbcmhsfx Abpoif Orifice Diameters: 0.18 / 0.25 / 0.30 / 0.35 mm Hydraulic Pump: 71 cm³ (103 L), axial piston pump max. 200 bar Cooling Water Flow: 30 L/min Optimum Water Inflow: 4 bar Adjustable Pressure Water Pump: 10–16 bar