Used Waterjet Sweden for sale (439)

Year of construction: 2014, condition: like new (used), functionality: fully functional, Jöni Easy 250 lit cooking vessel year of construction 2014. Electric tillable built in steam generator. Fully driven by electrical power. Lrsdpoydpgaofx Ah Ssu

Condition: ready for operation (used), functionality: fully functional, CES Coolbox 3-Fans shock freezer cabinet for connection to Co2 fluid. Lrodpfxoydpnqs Ah Ssu Maximum trolley size 120 x 115 x Hight 215 cm.

Condition: used, Conveyor mechanization suitable for scanning systems. Lrsdpfexpgmgjx Ah Ssu Speed: up to 140 m/min. Manufacturer: Framtec (Sweden) Year: 2014

Condition: new, Year of construction: 2025, operating hours: 500 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Lrjdpfxexm Rigs Ah Seu Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: like new (used), functionality: fully functional, Koppens mod TG 2000/400-219 gitter conveyor whit virus speed control on gearbox. Lredsyitu Ejpfx Ah Sou Belt width 40 cm.

Condition: used, Belt conveyor Lsdpfxeykn Ivo Ah Ssru Manufacturer: Vretstorp Country of manufacture: Sweden Length: 16m Width: 780 mm Electric motor: 5.5 kW

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern. Lrodpoykqxdsfx Ah Ssu

Condition: excellent (used), functionality: fully functional, Jahn electrical heated fryer in a compact form and in very good condition and not much used. The machine has previously been used at a pilote plant to make new products. Belt width 60 cm. Ledpsykuaxefx Ah Ssru

Condition: used, Garos GWT 3500 vacuum tumbler whit Scanvaegt weight system and built in vacuum pump. Lrjdpeykub Nsfx Ah Sju Capacity 3500 lit.

Condition: used, mileage: 987,000 km, power: 260 kW (353.50 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2025, color: silver, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Well-maintained refrigerated box truck Mercedes Benz Antos 1835 with Lamberet freezer box, liftgate, and Thermoking refrigeration unit (diesel/electric). Special equipment: Axle load - measuring device, front axle load 8.0 t, airbag on driver's side, audio system: CD radio (Bluetooth), right exterior mirror with maneuvering position, battery 220 Ah, brake connection standard and DuoMatic, compressed air connection in the cab, air horn, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: brake assistant (Active Brake Assist 3), driver assistance system: lane keeping assistant, driver assistance system: roll control assistant, cab: steel-sprung, comfort, transmission 12-speed - type: G 211-12, info display 12.7 cm with video function, fuel tank: 290 liters, aluminum, right, engine power take-off at the front with preparation for Frigoblock, enhanced engine brake, tire pressure monitoring system, reversing warning system (audible warning signal outside), liftgate switch, rear crossmember reinforced, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sun blind for side window, driver's door, 24V socket in the passenger footwell (additional). Additional equipment: Emission standard EURO 6, axle configuration: 4x2, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, Antos, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: tilting device hydraulic, cab: S ClassicSpace, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf / air, suspension: front springs 7.5 t, 2 leaves, electric window lifts, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, manually operated sunroof (steel), rear axle bevel gear 440, body/superstructure: chassis, comfort locking system, steering pump unregulated, air intake from the front, engine 7.7 liters - 260 kW R6 diesel (OM 936), engine compartment encapsulation, ramp mirrors, spare wheel, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, splash guard front, stabilizer front axle, socket in the cab 24V, tachograph / EC control unit, underbody panel aerodynamically shaped, front underrun protection, preparation for toll collection, front axle angled, permissible total weight 18.00 t Tire condition: front axle approx. 40%, rear axle approx. 50%. The engine was overhauled at approximately 600,000 km, and the exhaust system was renewed in 2025. Errors and prior sale excepted! Lrodpfxsxai Dce Ah Sou

Condition: excellent (used), functionality: fully functional, Kilia 200 lit cutter whit lifter for 200 liters meat bins and emptying arm. Very good condition direct from production. Ledpsyk U Ntjfx Ah Seru

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. Lrsdpexv Arxsfx Ah Sju NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option. Lredpfxexwkuqj Ah Ssu

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder Lrjdpfx Aoikvlijh Ssu 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, mileage: 521,699 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air tank, driver assistance system: Attention Assist (fatigue detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with band filter, info display 10.4 cm with additional indicator, integral rear, communication interface, fuel tank: 290 L aluminum, alloy wheels 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 123-10b, frame lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), fifth-wheel coupling, low-maintenance, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semitrailer, preparation for revolving beacon, transmission oil cooler Lrsdpfouh Nd Rjx Ah Sou Additional features: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right side, exterior mirrors electrically adjustable & heated, battery 170 Ah, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting, cab: S ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf/air, front spring bracket aluminum, power windows, alternator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown wheel 440, body/superstructure: tractor unit, central locking system, 3-piece mudguards, unregulated steering assist pump, front air intake, engine 10.7 L - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, cab seats: functional passenger seat, cab seats: standard driver's suspension seat, front splash guard, front axle stabilizer, 24V cab socket, tachograph/EC control device, aerodynamically shaped underbody panel, front underrun protection, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t VIN: WDB96340310049335 First registration: 12.05.2016 Net price Tel./WhatsApp:

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. Lredpfx Ahjth Taas Seu 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, I am selling: TRASMEC COC800DN Mobile Screw Loader/ Conveyor in a good working condition. Manufactured in 2009 by the well-known Italian conveying equipment manufacturer TRASMEC S.r.l. Suitable for handling wood chips, sawdust, biomass, shavings, pellets, compost, and other bulk materials. Ideal for sawmills, pellet plants, biomass facilities, recycling operations, and wood-processing companies. Specifications Manufacturer: TRASMEC S.r.l. (Italy) Model: COC800DN Year of Manufacture: 2009 Serial Number: AL0581C-C006603 Mobile wheeled design Heavy-duty steel construction Industrial screw conveyor system Lsdpezcu Hvofx Ah Sjru Electric drive CE-marked European equipment Condition Used industrial equipment Structurally sound Applications Wood chips Sawdust Biomass Wood shavings Pellet production Compost and organic materials Bulk material handling

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt Lredpfszyu Nqex Ah Ssu • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: used, Year of construction: 1988, Type: Riveting machine Manufacturer: ARNO Maskiner AB, Sweden Model: 1304 Year: 1988 Condition: fully working Lredoxgpftopfx Ah Sou

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Lsdpezka Imofx Ah Ssru

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades - automation- TG automation, Sweden Sorting - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 - Drum chipper Erjo 204 MA Lsdpfx Aovzqcyjh Sjru - stacker Almab with 9 cassettes - Pack press

Year of construction: 2015, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, Machine for the production of aluminum roller shutters. Functional length: 400 cm. Ljdpfozk Tqhjx Ah Ssru

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Lrodpfx Ahoi Hckre Seu ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Lrodpfxjulu Nuo Ah Sou Manufactured by Electro Heat Sweden AB.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: Lodpfx Ahjz Nll Ho Soru High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.