Used Weight Balance for sale (59,384)

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Ljdpswcg Elefx Amneaa Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Lajdpfxox Ekuis Amnsa

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Laodpfeyxrhdox Amnea Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: used, Year of construction: 2012, TREIF Falcon Hybrid Portion Cutter – 2012 For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system. The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery. The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision. Key Features - Year: 2012 - Complete system including infeed weigher and checkweigher with automatic reject - Recently serviced - Excellent working condition - Immediately available Laedpfx Amoyux Eaensa Typical Specifications - Maximum cutting capacity: up to 550 cuts per minute - Maximum product cross section: approx. 260 × 155 mm - Maximum product infeed length: up to 1000 mm - Installed power: 11.7 kW This machine is ideal for meat processing plants requiring precise weight portioning with integrated quality control. Price: On request Location: The Netherlands Availability: Immediate For more information, photos, or a video of the machine in operation, please contact us.

Condition: used, Year of construction: 2010, Manufacturer : Serac Model : DMX R6V3/720 Year : 2010 Type: Monoblock filling and screwing   Current application: 250 mL bottle/vial - Ø38 mm screw cap Output: 3,300 bottles/hour Dosing: by weight Suction conveyor feed system ensuring bottle stability Heraeus UV tunnel: decontamination Lsdjyr Sxnepfx Amnjaa Feeding of caps via hopper and bucket conveyor and distributor Decontamination of bottle caps using Claranor pulsed light   Filling: 100L capacity hopper 6 nozzles on scales connected to the ejection of bottles at the machine outlet   Screwing: Tightening of caps using pneumatic jaws Adjustable clamping pressure

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. Lsdpjfm Ev Rjfx Amnjaa With complete accessories and attachments. Little been in use.

Condition: not inspected (used), Year of construction: 1970, Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Lodpfx Amjhikdwoneaa Max. permissible load per block: 200kg

Condition: good (used), Sartorious Stainless platform scale / balance trolley Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment Lasdpfx Amed Tw Ixsnja

Condition: used, overall weight: 36,000 kg, first registration: 04/2024, next inspection (TÜV): 04/2026, Weight Master per 55 cbm White aluminium Overall length: 11,106 mm Internal length at center of body height: 9,917 mm Floor length: 9,409 mm Overall width: 2,550 mm Internal width at center of body height: 2,460 mm Internal width at top frame: 2,350 mm Overall height to top frame / to top of tarpaulin: 3,775 / 3,945 mm Internal height: 2,250 mm Track width: 2,040 mm Distance: Kingpin to 2nd axle: 6,810 mm Rear overhang: 1,418 mm Floor height: 1,525 mm Max. height when tipped: 10,170 mm Gross vehicle weight: 36,000 kg Technical gross vehicle weight: 39,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 12,000 kg Loading volume: 54.6 m³ Unladen weight: 6,389 kg Chassis Super Light chassis frame, straight, longitudinal beams with recessed fifth wheel plate section. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Aluminium side underrun protection in accordance with ECE 73 2 plastic wheel chocks Axle spacing: 1,310 mm Distance: Kingpin to 2nd axle: 6,810 mm Steel underrun protection Foldable rear underrun protection Axles and Suspension 1,150 mm coupling height unladen Number of axles: 3 Rigid axles 1st axle liftable SAF disc brake axles 3x9,000 kg 22.5" INTRADISC CD Landing Legs Aluminium drop-down landing legs, Haacon Mudguards Full PVC mudguards - 6 units Splash guards with Wielton logo behind the third axle Rims 6 steel rims Tires 6x tires 385/65 R22.5 Other chassis equipment Aluminium ladder L=2,840 mm Water tank – 30 L (mounted on chassis center right side) Plastic fire extinguisher box (mounted on landing leg, left side) Toolbox – 165 L (mounted center of chassis, left side) Toolbox – 45 L Dust bag holder on frame Body Volume: 55 m³ Internal height: 2,250 mm Combination door Side walls SL, internal thickness 2.5 mm, fully welded 5 mm wear plates at the rear section of the side walls (approx. 4 meters) Front wall angled at 20 degrees Double-leaf combination aluminium tailgate, aluminium (1/2 + 1/2) vertical, with portal beam 2 grain chutes Pallet-width execution BO00100A 5 mm floor Tension locks at the bottom – 2 pcs Floor crossbeam spacing under the floor: 360 mm DA00001A body damping PolyP Dust bag Other body equipment Tension chain between side walls Operator station mounted on front wall, step access front left Cover PVC roll tarpaulin 680 g/m² with quick-release and aluminium roll-up tube (with vertical rear closure, front and rear extension triangle, center tube welded into tarpaulin) Brake/Pneumatic system Spring pressure gauge Lsdsyyf Sfepfx Amnoaa Automatic lowering during tipping, can be deactivated Aluminium air tanks Wabco brake system 2S/2M Chassis paintwork Chassis painted RAL 7021 (black grey) Body paintwork Body painted RAL 9006 (white aluminium) Tarpaulin color Tarpaulin color RAL 9006 (white aluminium) Hydraulics Hydraulic connection kit 1 HYVA hydraulic cylinder, eye mount on top Electrics Full LED lighting 2x7-pin + 1x15-pin with EBS connection, without cables to tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Tip angle indicator Markings Reflective warning boards Partial contour marking with Wielton logo Wielton warning decals Partial contour marking side white Partial contour marking rear red Includes 1x vibrator

Condition: good (used), Bagging machine with Scanvægt scale. Make - MESOMA. Model - VMS-C 320 HS. Year - 2002. Capacity - approximately 90 bags per minute. depending on product. Filling tube diameter - 150mm. Bag length - 100mm - 380mm. Foil width, max - 670mm. 240/400V, 16A, 50hz. Laodpfx Asv D Ithomnoa Heard run with a spiral freezer, where they have packed from 600kg. to 800kg. Per hour. Scanvægt scale, capacity - From 200g - 30kg. Division - 10gram. CLH.24.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2014, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,390 mm, total width: 2,550 mm, suspension: other, tire size: 385/65 R22,5, wheelbase: 6,770 mm, Year of construction: 2014, Equipment: ABS, = Additional options and equipment = - ADR - BPW axles - EBS Ledjynhhqjpfx Amnsaa - Air suspension - Drum brakes = Notes = 2014 LAG 20FT ADR chassis with ABS/EBS, BPW ECO-PLUS axles with drum brakes, ADR (EXII, EXIII, FL, AT) valid until 01.09.2026, 1x20FT, unladen weight: 3,540 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tyres (L: 15/17/15 mm; R: 14/16/15 mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle make: BPW ECO Plus Brakes: drum brakes Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 90%; Suspension: air suspension Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95%; Suspension: air suspension Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95%; Suspension: hydraulic suspension Weights Unladen weight: 3,540 kg Payload: 35,460 kg GVW: 39,000 kg Functional Body make: LAG O-3-CC Condition Technical condition: very good Visual condition: good Identification Registration number: ON-20-KZ Further information Please contact Arne Honingh for more information.

Condition: used, This listing is for the Sartorius Tare CP4202S Top Loading Balance + Printer Lajdpfxeygmike Amnoa The unit is in full working condition and is ready for immediate use The Sartorius Tare CP4202S is a high-precision top loading balance designed for routine laboratory weighing applications. Known for its reliability and durability, it delivers accurate and repeatable results, making it ideal for research, quality control, and industrial labs. The balance features fast stabilization time, intuitive operation, and a robust construction suited for daily use. With Sartorius’ trusted weighing technology, the CP4202S ensures consistent performance, ease of calibration, and dependable results for a wide range of weighing tasks.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: RMUW 0412, Measuring device CAB920, year 2012 Machine bed & frame, year 1983 TECHNICAL DATA Rotor data: Rotor weight: 0 to 1600 kg The machine can be overloaded up to 2,000 kg with symmetrical loading Per bearing pedestal max.: 1,000 kg Distance between bearing centers max.: 1,750 mm Distance between bearing centers min.: 70 mm Distance for belt drive between bearing centers min.: 140 mm Rotor diameter above the machine bed max.: 1,600 mm Bearing journal diameter: 15 to 120 mm Drive data: Belt support diameter: 30 to 600 mm Balancing speeds at 100 mm belt support diameter: approx. 600 / 1,000 / 1,750 rpm Lajdpfsy A D I Rjx Amnja

Condition: used, Year of construction: 1983, Schenck M480-1/450 High-Precision Dynamic Horizontal Balancing Machine with CAB 690 Control (1983) Speed Range 20-5,000rpm. Maximum Rotor Weight 450kg. Asset No.10_627. S/No. AHG 0459 (1983). Ljdey Dr Unopfx Amneaa Description With Interlocked Guards & 2 Roller Steady Supports.

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Ledpswgnu Nefx Amnsaa Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: used, Year of construction: 1995, documentation vorhanden dimensions of the machine ca. 4,10 × 1,20 × 1,40 m Lodpfx Aeyhrcrjmnoaa

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Very nice 2003 BURG 20FT ADR swap body chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tyres: 385/65-R22.5 (left tread: 7/10/15 mm; right tread: 13/6/15 mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle manufacturer: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95% Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-34-FN Ljdsykad Nspfx Amnoaa Further information Please contact Arne Honingh for more information.

Condition: good (used), Technical data for compensation plate: Manufacturer: Bito PRO Scope of delivery includes: 01x compensation plate, used Suitable for base plate M; Mounted on upright P4-P6 Material finish: Sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 120 mm Weight: approx. 0.46 kg | pc. Lasdpfxji Hkngo Amnoa

Condition: good (used), Technical data of the shim: Manufacturer: Polypal Included in delivery: 01x shim, used Total width: approx. 130 mm total depth: approx. 85 mm Lsdpfxji Hkm Uo Amneaa material thickness: approx. 1,50 mm Drill hole Ø: approx. 15 mm number of drill holes: 2 pcs. Weight: approx. 0.12 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized Lodpsi Hknyofx Amneaa total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | pcs. Ledpfxji Hknvj Amnoaa

Condition: good (used), Included in delivery: 01x shim, used Total width: approx. 135 mm Lodpfxsi Hknco Amnsaa total depth: approx. 130 mm material thickness: approx. 1,50 mm Hole spacing (center - center hole): 45 mm Weight: approx. 0,19 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Lodpfxei Hkn Ds Amneaa Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm Lajdpfji Hkn Iox Amnea hole distance (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | pcs.

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm Lajdpfx Amoi Hknkenea total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | pcs.