Used Weinig Powermat for sale (469)

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Weinig 814, Weinig 811, Gedpfev Skayex Agpsui Weinig 806

Year of construction: 1995, condition: good (used), planing width 220 mm planing height 140 mm tool diameter max 160 mm 2 x 5.5 kW main engines Gedpfxeg E Uqcj Agpjui 3 kW feed motor feed speed 6 - 36 m / min - on the inverter feed on cardan shafts heads supported on both sides electric height adjustment

Condition: excellent (used), WEINIG Unimat 23 E four-side planer Godexvc Uajpfx Agpeui Maximum planing width: 230mm, Maximum planing height: 130mm, 5 spindles, Manual adjustment of planing dimensions, Spindle arrangement: bottom 7.5kW; left and right 11kW; top 11kW; bottom 7.5kW, Motors with brakes, Spindle diameter: 40mm, Fully adjustable spindles, Machine equipped with 4 feed rollers on the table, suitable for wet timber, Feed via cardan shafts with stepless regulation, Machine supplied with the heads shown on the spindles, Cardan shafts not worn, tables unworn, runs smoothly without vibrations or oscillations, Robust planer in original condition, weight approx. 5t. Very good condition, everything works.

Condition: used, Extension rings, spacer rings with an inner diameter of 40 mm. Image similar Available sets: 5 Price per set: €30.00 + VAT Inner diameter (d): 40 mm Gedsxmh T Ajpfx Agpeui Outer diameter (D): 60 mm Widths each: 25/10/10/8/8/5 mm

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Gjdpfx Aexp U R Hjgpoui

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg Gjdpfxsw Ipcvj Agpoui ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Gusdpet Uvz Rjfx Agpsi

Condition: good (used), Year of construction: 2005, Planer machine with 5th spindle underneath max. planing width 260 mm max. planing height 160 mm Godswy Hilepfx Agpjui

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 116387, planing height: 160 mm, planing width: 260 mm, total width: 145 mm, total height: 170 mm, total length: 375 mm, workpiece weight (max.): 2,100 kg, workpiece height (max.): 160 mm, compressed air connection: 8 bar, type of input current: three-phase, workpiece width (max.): 260 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Equipment: motor brake, Weinig Cube 4-sided planing machine for sale. Offered for sale due to very little use in our workshop. Originally supplied and always serviced by De Groot Bewerkingmachines. Machine operates perfectly. Currently disconnected and packed, but can be demonstrated in operation upon serious interest. Year of manufacture: 2011 Weight: 2,100 kg Connection value: 400V 63Ah Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm 1x Guedexhcizopfx Agpoi Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm All values adjustable via touchscreen display Visible removal indication by laser lines Total machine length: 375 cm Total machine width: 145 cm Total machine height: 170 cm Incl. planing heads with knives. This is a good quality machine.

Condition: used, 10 spacer rings with an inner diameter of 40 mm and a width of 10 mm. Image similar Available sets: 2 Price per set: €35.00 + VAT Gujdpfx Aexmh Rhegpoi Inner diameter (d): 40 mm Outer diameter (D): 60 mm width: 10 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92552, working width: 230 mm, planing height: 120 mm, working height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Godpfx Ajwnr Enjgpjui Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Second-hand Weinig machinery for woodworking

Condition: used, Year of construction: 1993, Catalogue number: 7705 TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller - Feed via Kardana shafts - Stepless feed speed adjustment - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Guedpfsw Edgfex Agpji Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) Gujdpfx Aou Udd Segpsi 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: used, Year of construction: 1996, Weinig Hydromat 23 Guedpfeqrt Ekex Agpsi Technical data Working width 30 - 230 mm Working height 19 - 200 mm Spindle down, right, left, up, down u- re-li-o-u.o without infeed machine only Machine is dismantled, immediately available Transport can be organized

Year of construction: 1999, condition: ready for operation (used), A four-side planer Weinig is available. Working width: 230mm, working height: 120mm, feed rate: 24m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Gusdpfxjxpw Uho Agpji

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Gedpfxoxak N Hj Agpjui Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. Guodpjtwy Iuefx Agpji - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW Gsdpfeiba Evex Agpjui 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), functionality: fully functional, power of feed motor: 11,000 W, Hydraulic feed from Weinig Gjdpfx Ajv Skbkjgpjui Feed speed 120 m/min Motor power 11 kW

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder Gsdpfxjncc Igj Agpsui only machine machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW Guodpfx Ajlikzfegpsi 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) Gedpfx Agoulnr Aopoui 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface Gjdsncc Icopfx Agpoui sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: Gujdpfx Agoq Nnpfspji - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7133 TECHNICAL SPECIFICATIONS - max. working width: 220 mm - max. working height: 120 mm – 5 spindles: 1) bottom horizontal – 220 mm, 5.5 kW 2) right vertical – 120 mm 3) left vertical – 120 mm; spindles 2 and 3, 11 kW each 4) top horizontal – 220 mm, 11 kW 5) bottom horizontal – 220 mm, 5.5 kW - all spindles adjustable up/down, left/right Gedopmr T Aepfx Agpjui - spindle diameter: 40 mm - pneumatic pressure rollers - 4 driven, gear-feed rollers from above, including 2 double - 1 double outfeed roller from above, smooth, rubber-coated - 1 outfeed roller from below, rubber-coated - feed via Cardan shafts - adjustable feed speed - feed motor: 2.2 kW - lifting motor: 0.25 kW - electric thickness adjustment - infeed table length: 1970 mm - central lubrication - extraction port diameter: 4x120 mm, 1x140 mm - dimensions (LxWxH): 3500x1550x1400 mm - weight: 1750 kg ADVANTAGES – with 5 cutter heads – German-made – original paint (not repainted) – used planer, in very good condition Net price: 48,900 PLN Net price: 11,640 EUR (depending on 1 EUR = 4.2 PLN) (Prices may change based on currency fluctuations)