Used Four Side Planer for sale (1,623)

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Kdjdou Au I Topfx Ag Nou Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Ksdpfxel Dw Nxo Ag Nedu

Condition: used, Capacity: 80 m/min Kdjdpfsg S Dm Nsx Ag Nou Planer feed table, tested. At speeds up to 80 m/min.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: Kdodpsi Apuhsfx Ag Nsu - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) Kdsdpfswwk Rbox Ag Nou New electrics and motor

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs Kdsdpfxeh U Nvks Ag Nsu RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 2016, condition: used, General information Year of manufacture: 2016 Kdedpfxexpu Ewe Ag Nou New: No Technical information Drive: Wheel Empty weight: 1.265 kg Dimensions (LxBxH): 264 x 244 x 152 cm Functional Working width: 244 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Condition CE type: CE Incl. 2 x BLR2 Laser receiver, Very little used.

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Kedpfxeih Dxds Ag Njdu Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm Kedpjxpuufefx Ag Nodu spindle 6: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Planer table length: 1.200 mm Control: Memory Plus

Condition: used, Planer MARTIN T51 - used - noise-insulated table lips, fence bar, motor brake ----- Technical data ----- Planing width: 51 mm, Table length: 2,520 mm, Max. cutting depth: 16 mm, Cutterblock diameter: 120 mm, Number of knives: 2 pcs, Fence swivel range: 0-45°, Extraction port: 140 mm, Motor power: 4.8 kW Kdedpfx Agsxm R Upj Nsu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, total height: 2,000 mm, total length: 7,600 mm, overall weight: 6,500 kg, number of spindles: 8, Leadermac, Hypermac 823 8 spindles Planing width 15–230 mm Planing thickness 10–150 mm Minimum workpiece length 200 mm Spindle speed 6000 rpm Spindle diameter 40 mm Permitted saw circle – vertical spindle: 112–232 mm, horizontal: 100–225 mm Feed speed 6–24 m/min 6500 kg Length 7600 mm Height 2000 mm Depth 2000 mm Ksdpfxoxmlk Ss Ag Nsdu 400 volt Manual in Dutch and English

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Kdedpfx Ajqlck Nsg Nju Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Weinig Hydromat 23 planer and moulder for four-sided planing and profiling of wood and beams with high feed rates and four driven rollers in the table. spindles: 8 working width: 230 mm working height: 160 mm spindle 1: Bottom / 11 kW / 50 mm spindle 2: Right / 11 kW / 50 mm spindle 3: Left / 11 kW / 50 mm spindle 4: Right / 7.5 kW / 50 mm spindle 5: Top / 11 kW / 50 mm spindle 6: Bottom / 18.5 kW / 50 mm spindle 7: Top / 7.5 kW / 50 mm spindle 8: Bottom / 7.5 kW / 50 mm feed: max. 60 m/min // 11 kW // Hydraulic delivery time: on demand Kdjdpjxp Hqlefx Ag Neu

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data Kodpecnxayefx Ag Njdu ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: used, Year of construction: 2014, Weinig Powermat 600 planer and moulder for four-sided planing and profiling of wood. spindles: 5 Construction year: 2014 working width: 230 mm working height: 160 mm spindle 1: Bottom // 7.5 kW // 40 mm spindle 2: Right // 11 kW // 40 mm spindle 3: Left // according to motor with spindle 2 // 40 mm Kdodpjxpvdzefx Ag Nou spindle 4: Top // 7.5 kW // 40 mm spindle 5: Bottom // 5.5 kW // 40 mm

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. Kodsqlckpepfx Ag Nodu - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available - Kedpfxelht Hte Ag Nedu

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back Kedpfx Aoc Uydasg Nedu 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Kodoff Hdmepfx Ag Nsdu Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: new, Year of construction: 2024, Martin T 54 jointer Kdjdpfx Agepgkmwe Neu Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Kdodpfopq If Djx Ag Neu Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Kdjdpfx Aobuldyog Neu Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head Kdjdpfx Ajff Efcsg Neu The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. Kjdpfsbxz S Hex Ag Nedu The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Year of construction: 2022, condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm Kodsdkl Sqopfx Ag Nedu diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available.