Used Weinig Profimat 22 N for sale (472)

Condition: good (used), Year of construction: 2010, WEINIG NKT Finger Joint Cutter Double-Pack DP20 An industrial finger jointing line – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Dcodpfx Asx Ti Rfobusc Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Finger joint type: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connected load: 80 kW Note: The machine is currently dismantled and stored at our site. Inspection is possible by appointment. Scope of delivery: WEINIG NKT Double-Pack DP20 incl. control unit Integrated glue station for two-sided application Operating manual & documentation

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... Dedpsxwdv Iefx Abuocc > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: good (used), Year of construction: 2008, I sell the fourside moulder Weinig Unimat 300, year 2008 Feeding speed 5-30 m/min. Dcjdpfsr Arr Ejx Abuoc Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Fully working! Available immediately

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping Djdpeq Au Tljfx Abuscc 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles set: dolna/prawa/lewa/górna spindles diameter 40mm Dsdpfxoqfd Dlj Abuscc pneumatic pressure of feeding rolls table lubrication

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Djdjxg Sa Hjpfx Abuocc One driven roller at the outfeed table.

Condition: good (used), WEINIG UNIMAT 23 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 7,5 KW 8: BOTTOM 7,5 KW Dcsdpfx Abeyahubousc 9: UNIVERSAL 7,5 KW 360° TILTABLE 15 x DRIVEN TOP FEED ROLLERS 5 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER POSSIBLE TO INCREASE MOTOR SIZES AS NEEDED

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) Dedoulnr Ajpfx Abuscc 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: used, Cabin for Weinig Unimat 300 Dcodpfoxga E Djx Abusc

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 96409, type of input current: three-phase, input voltage: 380 V, power: 73 kW (99.25 HP), input frequency: 50 Hz, input current: 159 A, We offer this used Weinig Unimat 23 moulder, year of construction 2002. Dcodpfxjx Ttyds Abujc Machine number: 96409 Machine type: Unimat 23 Year of construction: 2002 Circuit drawing number: B.96409 Operating voltage: 3 x 380 V 50 Hz Control voltage: 230 V 50 Hz Nominal current most powerful motor: 29 A Nominal current: 159 A Main fuse: 160 A Power: 73 kW If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) Dcedpfxsx Hkp Nj Abujc 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm Dodpsxtvgkjfx Abuecc > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Dsdpfx Aowqr Rvobuocc Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: good (used), Year of construction: 1985, WEINIG HYDROMAT 22B Weinig automatic infeed device, type : EM2 Max working width : 220 x 140mm Spindle diameter : 50mm Infeed engine : 7,5 Kw Spindle configuration : 1. Under 7,5 Kw 2. Right 7,5 3. Left 7,5 4. Top 18,5 Dcjdpjxbn T Esfx Abuoc 5. Under 30 6. Under 11 7. Top 11 Infeed speed : 5 - 60 mtr/min ( Frequenz controlled ) Infeed : Kardan, with 5 driven rollers inbeded in the table Lots of heads/tools included

Condition: used, Adjustment status for Weinig Powerlock Dcjdpfx Ajxga Ewebuoc

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min Djdpsx Dzc Sefx Abujcc One driven roller in the table at the outfeed.

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm 8 heads Dodpfx Abox Sw T Souscc 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Year of construction: 1987, condition: excellent (used), Automatic rebating machine WEINIG UNIVAR 10 Dsdpsf Upzhefx Abuscc

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Dcodsxpi Eljpfx Abuoc Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Dodpfx Abjwyulujuocc Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) Dcsdper Axwnefx Abuoc 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine Dcjdpfx Aoxqh E Hjbuec 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: good (used), Weinig Rondamat R960 Year of manufacture: 2002 Djdpowzu N Aofx Abuscc

Condition: good (used), Weinig Hydromat 22A Number of spindles: 7 Working width: 220 mm Working height: 120 mm Feed table length: 2,500 mm Spindle diameter: 50 mm Feed: Cardan shaft Jointer: 6 + 7 spindles Spindle arrangement Dcsdpfjwk H Rqjx Abusc Lower 5.5 kW Right 5.5 kW Left 5.5 kW Right 5.5 kW Top 7.5 kW Top 5.5 kW Bottom 5.5 kW

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Dsdjumtlqspfx Abuscc Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH