Used Welder Generator for sale (11,245)

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Bwedjv Uag Ijpfx Aa Nji

Condition: like new (used), functionality: fully functional, Power output 12 kW / 15 kVA Drive engine 18 kW Hatz diesel Bwedpeynuukjfx Aa Nsi Total weight approx. 780 kg

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Bjdpfx Aaox U Tgmj Newi Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) Bsdpfx Aaexfrv Ee Nowi 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Bwodpfov Ic Sajx Aa Nsi

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Bedpfxot H Nhuo Aa Nowi Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Bsdew U N Daepfx Aa Njwi

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Bwodpfx Aasyhc Tuo Noi Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: good (used), Year of construction: 2009, Mueller P7505 Pure steam generator Serial: 394131-1 Bwsdpfxjw Ha I Ij Aa Noi 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph

Condition: good (used), Year of construction: 2016, BWT VT2000 Pure steam generator Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock Bsdpfsw Dykkex Aa Njwi

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v Bodpfx Aoyhc Swja Nowi - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Bedpfx Aasyhc Rme Newi

Condition: used, operating hours: 429 h, color: other, total length: 3,250 mm, total width: 1,250 mm, total height: 1,900 mm, Price: On request - Documentation available: No Bwedpfx Aajym Uzbo Nsi - CE certificate present: No - Serial number: - Operating hours: 429 - Transport dimensions: 3250mm x 1250mm x 1900mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 Bwodpfx Aaomgadpj Noi – Construction year: 1990 – Working hours: 23,710

Condition: new, Year of construction: 2006, power: 400 kW (543.85 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 1,850 mm, Voltage: 400 Bedpfx Aaoyqxidj Njwi

Condition: used, Year of construction: 1996, power: 950 kW (1,291.64 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Current frequency: 50 Hz Bsdpfjyqxh Tjx Aa Newi Voltage: 400

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 890 kg, fuel type: diesel, tank capacity: 90 l, color: green, power: 30.3 kW (41.20 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,000 mm, total width: 860 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar 4TNV98 IGECS, type of cooling: water, INDUSTRIAL GENERATOR SET EY-30Y-SA, 30 kVA PRP, 33 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: - YANMAR DIESEL ENGINE 4TNV98-IGECS (STAGE IIIA) - LINZ ALTERNATOR MODEL PRO18S C/4 WITH AVR - WEATHER- AND SOUNDPROOF ENCLOSURE, GREEN COLOUR RAL6017. ROOF + BASE FRAME + PANEL GREY RAL7012. - Automatic mains failure panel (AMF), COMAP AMF8 control card, battery charger and socket set: - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x SCHUKO 230V Magnetothermal circuit breaker for each socket Bjdpfx Aaeyqyixo Nowi General adjustable earth leakage circuit breaker (RCD) - Quick connector for ATS

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,000 kg, fuel type: diesel, tank capacity: 100 l, color: green, power: 45.01 kW (61.20 HP), output current: 72 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 40 kW (54.38 HP), nominal power (apparent): 55 kVA, continuous power: 40 kW (54.38 HP), continuous power (apparent): 50 kVA, total length: 2,000 mm, total width: 850 mm, total height: 850 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT NEF45AM2 Iveco, type of cooling: water, Aggregaat.store / van Delft Staal INDUSTRIAL DIESEL GENERATOR SET MODEL EY-50F-SA, 50 kVA PRP, 55 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. Bsdpfx Aoypm I Eea Njwi CONFIGURATION: - DIESEL ENGINE IVECO FPT NEF45AM2 (NON-EMISSION) - LINZ ALTERNATOR MODEL PRO18L F/4 WITH AVR - WEATHER- AND SOUNDPROOF HOUSING GREEN RAL6017. ROOF, BASEFRAME AND PANELS GREY RAL7012. - AUTOMATIC PANEL (AMF) WITH BATTERY CHARGER AND COMAP AMF8 CONTROL BOARD, WITH SOCKET SET: 1 x CEE 400V 5P 125A 1 x CEE 400V 5P 32A 1 x CEE 230V 3P 16A 1 x SCHUKO - MAGNETOTHERMAL CIRCUIT BREAKER FOR EACH SOCKET - MAIN RESIDUAL-CURRENT CIRCUIT BREAKER

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 780 kg, fuel type: diesel, tank capacity: 130 l, color: green, power: 18.02 kW (24.50 HP), output current: 28 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 22 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 1,875 mm, total width: 880 mm, total height: 1,170 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Kohler KDI 1903M stage V, type of cooling: water, Generator / Rental Version MODEL EY-R20K, 20 kVA PRP, 22 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: - KOHLER KDI1903M DIESEL ENGINE (STAGE V) - LINZ SLT18MD ALTERNATOR WITH AVR - RENTAL VERSION WEATHER AND SOUNDPROOF CANOPY GREEN COLOR RAL6017 + ROOF, BASE FRAME, AND PANEL GREY RAL7012, WITH 130LT FUEL TANK, BATTERY ISOLATOR, THREE-WAY VALVE AND EXTERNAL FUEL FILL WITH LOCKABLE CAP, DOCUMENT HOLDER - AMF PANEL WITH: COMAP AMF25 CONTROL PANEL (ELECTRONIC FUEL GAUGE WITH % LEVEL ON CONTROL PANEL), BATTERY CHARGER AND CONNECTION SET: - 1 x CEE 32A 5P 6H 400V - 2 x CEE 16A 5P 6H 400V - 1 x CEE 16A 3P 230V - 3 x SCHUKO 230V - Magnetothermal circuit breaker for each socket Bsdpjyplqfefx Aa Nowi - General residual current circuit breaker - 1 x CEE 16A 3P plug for battery charger connection

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included - Bsdpod Il R Aofx Aa Newi

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: KTA38-G5, Field of application: Construction Empty weight: 18.250 kg Generator capacity: 1.100 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 20FT HC container Please contact Sales Department for more information Bsdpsvyn D Sefx Aa Nowi Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: like new (used), Year of construction: 2011, operating hours: 36 h, machine/vehicle number: 02573550-060, color: green, power: 310 kW (421.48 HP), output frequency: 50 Hz, nominal power (apparent): 345 kVA, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Engine Model: QSL9-G5 Standby Power: 352 HP /263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Bjdpswzirxefx Aa Nswi Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EY02000809, overall weight: 1,220 kg, fuel type: diesel, tank capacity: 120 l, color: green, power: 40.89 kW (55.59 HP), output current: 65 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 36 kW (48.95 HP), nominal power (apparent): 49 kVA, continuous power: 36 kW (48.95 HP), continuous power (apparent): 45 kVA, total length: 2,400 mm, total width: 924 mm, total height: 1,490 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Kohler KDI 2504 TCR stage V, type of cooling: water, emission class: none, Energy Generator EY-45K-SA 6 kVA Stage V The Energy Generator EY-45K-SA is a robust 45 kVA KOHLER diesel genset available at Van Delft Staal, specifically designed to ensure stable power supply during any power outage. Equipped with a modern KOHLER Stage V diesel engine, this generator complies with the strictest emission standards, offering minimal emissions and optimized fuel efficiency. The EY-45K-SA features AVR (Automatic Voltage Regulation) technology, maintaining constant voltage at all times, making it ideal for the connection of sensitive equipment. This diesel generator operates quietly and efficiently, and is engineered for long-term reliability—exactly what you expect from Aggregaat.store. Benefits at a glance: - Power: 45 kVA / 36 kW PRP Bwodpfx Ajyn Ac Nea Nji - Standby power LTP: 49.5 kVA / 39.6 kW - Stage V emission compliant – environmentally friendly and powerful - 1500 rpm - Quiet, fuel-efficient, and low maintenance - AVR system for stable voltage Extras: - Interior lighting with sensor - Engine coolant preheating system from 0 to 450 kVA - Manual oil extraction pump up to 300 kVA - Double-stage insulation monitoring - Mains battery charger and engine preheater - Connector for external ATS command connection - Lockable fuel cap Perfect as a backup generator during power outages or for mobile power supply applications. We deliver all generators fully tested and ready for operation. Van Delft Staal/Aggregaat.store—your partner in dependable energy supply, wherever and whenever you need it.

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Bjdpfx Aoxb D Hboa Njwi Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation: 500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Bedpfx Aaowx H Hzj Nowi Low maintenance – no chemical batteries