Used Welding Robot Cell for sale (8,448)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Bwjdpfx Amsv Dvlls Tjr Machine frame System is ready for welding immediately

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Bjdpfxjxw R Nns Am Towr

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” Bwodpfx Amoy Efmgo Tsr All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg Bodpfx Amori S Hkj Towr The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Year of construction: 2005, condition: used, most probably unused part -No: RC 08 05 4402 Bwedpfxedq E Hxe Am Tsr P_nominal: 75kVA_ 20%ED Prim.: 500V F=1000Hz Sec.: 8,4V Sec. short circuit current: 23,7kA 86kg

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Bwedpfoy D Nwtsx Am Tor Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A05B-2651-B011, arm reach: 911 mm, type of input current: DC, total height: 600 mm, load capacity: 7 kg, FANUC LR Mate 200iD/7L A05B-1142-B301 + R-30iB Mate A05B-2651-B011 | 2017 | complete set FANUC LR Mate 200iD/7L ➤ Catalogue number: A05B-1142-B301 FANUC R-30iB Mate Controller ➤ Catalogue number: A05B-2651-B011 The package also includes the operator panel (teach pendant) and all cabling! The robot is in very good technical condition, dismantled from a working installation, ready for immediate operation. 🔧 Key robot specifications: ✔ Model: LR Mate 200iD/7L ✔ Manufacturer: FANUC ✔ Year of manufacture: 2017 ✔ Number of axes: 6 ✔ Reach: approx. 911 mm ✔ Payload: 7 kg ✔ Repeatability: ±0.02 mm ✔ Robot weight: approx. 27 kg 🔧 Controller: ✔ Model: R-30iB Mate ✔ Catalogue number: A05B-2651-B011 ✔ Power supply: 200–230V Condition: ✔ Visual: very good ✔ Technical: fully functional, ready for operation ✔ Dismantled from a functioning installation Bodjywlgqepfx Am Towr 🛠 Service / Maintenance ✔ Last maintenance: May 2025 ✔ Regularly serviced ✔ Ready to work without the need for immediate servicing Applications ✔ Pick & Place ✔ CNC machine tending ✔ Production automation ✔ Packaging ✔ Assembly Additional information ✔ Shipping within the EU possible ✔ VAT and EU invoice available

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm Bedpfx Aecrtliom Tewr warranty: 6 month for material

Condition: like new (used), Year of construction: 2005, functionality: fully functional, ABB WELDING BOOTH WITH ROBOTS 1. GENERAL - Manufacturer: ABB - Type: FlexArc LX2 - Dimensions: 4.6 x2.6x 2.6 m - Weight: 5200 kg - Year of construction: 2005 - Previous use: training station 2 CONSTRUCTION - Supporting frame - Metal walls - Roof with extraction spigot for connection to external ventilation - Service door with window equipped with electric security bolt - Albany Rapid Protect 320 roller door with inverter - SICK horizontal safety curtain in the loading/unloading area of the turntable - Siemens S7-300 controller - Siemens TP 170B color/5.7" touchscreen control panel - horizontal-axis swivel for mounting an instrument / tool with horizontal axis type IRBP 250 L with a load capacity of 250 kg 3. ROBOTS - Robots 2 pcs. - 1 piece welding robot - 1 piece robotic (after retrofitting can be used as welding robot) - Type: IRB 1400 - Version: M2004 - Year of construction: 2005 - Serial No.: IRB1: 14-50257 IRB2: 14-50258 Bwjdpfjvbg Ufjx Am Tsr - Control: IRC 5 - Number of hours worked: approx.2000 - Automatic TCP measurement 4. WELDING EQUIPMENT - welding current source: MIGROB 500 (ABB) - 1 pc. - spare welding current source: LRC 430 (ESAB) - 1 pc. - wire feeder: WIRE FEED UNIT A34E - PIB ( ABB) - 1 pc. - cooler: OCE 2H (ESAB) - welding torch cleaning device TC96 - 1 pc. - welding wire cutting device - 1 pc.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. Bwedpfx Amox Exl Ns Ter The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Bwsdpfsy Emz Ssx Am Tsr

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, Welding robot KUKA from December 2019, very little used. 253 hrs. The robot is connected, available for testing, inspection in Lithuania. Industrial robot KUKA KR8 R2100-2 arc HW Working lifting load: 8 kg Maximum reach: 2100 mm Number of axes: 6 Positioning accuracy (ISO9283): +-0.04 mm Fixing: floor Protection class: IP54 Three-axis positioner KUKA KP3-H2H500 Axes: 3 Working load: 500kg (per conductor side) Bedpfx Aorgqx Uem Tswr Positioning accuracy (ISO9283): +-0.04 m Distance between discs: 3 200 mm Merkle Hight Pulse 452 rs welding source kit Phases: 3*400V Working range: 20 - 450A Welding voltage: 15 - 36.5 V Protection class: IP23 Applications: MIG/MAG, Pulse ARC, MMA/s Components: torch, cables, wire feeding mechanism, wire reel with bracket. Software: KUKA Office Lite KSS 8.5 offline TBI automatic clamp. Burner cleaning station 3 functions: pniaumo - nozzle cleaning, wire cutting, silicone coating. If you have any further questions, we will be happy to answer them.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Bodpfxjh Ad E He Am Towr Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free. Bwjdjh Aiy Sopfx Am Tsr

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Measurements height 2300 mm Dimensions Machine Length 3990 mm Bwjdpfx Aex D Dizjm Tor Main Drive Number of axis 6 This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Bsdpfxomu Agpo Am Tewr Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Bwodorfucqjpfx Am Ter Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, The machine is not in use anymore and therefore its for sale. It has 20h of welding and it has been 596h turned on. It is as new, as can be seen on pictures. Location of the machine is in KFK, Croatia and here it can be seen. For more information and price contact us. Bodswwt S Ujpfx Am Tewr

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. Bwodswra S Dopfx Am Tjr The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Bodpeyzn D Hofx Am Towr Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Max load - 1000 kg

Condition: new, Year of construction: 2026, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: Bwsdpfxeh Imyas Am Tor 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Max Speed Axis 1 70°/sec Flange diameter 400 mm ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: new, Year of construction: 2024, warranty duration: 12 months, 6-AXIS WELDING ROBOT WITH TWO 2-AXIS SERVO-DRIVEN POSITIONERS KIBOT R2200 is multi-axis welding robotic system. with arms moving in horizontal plane and robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. The jointed two-link arm covers a 360° area around the robot base without any blind-spots to reach. While the linear vertical axis provides high access equally at any point of the robot’s work-area. The tool center point (TCP) optimizes the robot motion to a minimum reaching the desired position in the work space. The unique kinematics offer unmatched reach and versatility for any welding application. The electrical cabinet (robot controller) has been integrated in the robot base to minimize floor space requirements. Application KIBOT R2200 welding robot has a cylindrical work-area with radius of 2200mm by the two rotational axes and vertical motion of 1200mm by the linear axis. The maximum range of the tool center point is 3000mm. Bsdevxi Hljpfx Am Tjwr The unique design allows 360° reach around the robot’s base creating multiple work-zones. The three rotational axes for welding torch rotation and inclination offer infinite capabilities of welding all joint types and positions. MOTION RANGE Maximum reach radius A1 + A2: 2200mm Transverse stroke А1: ± 180° Transverse stroke А2: ± 160° Vertical stroke А3: 1200mm Rotation range around A3: ± 360° Range of torch tilting angle: ± 135° Rotation range around А3: ± 360° MAXIMUM SPEED Rotational axis А1 + А2: 90°/s Linear axis А3: 1 m/s Rotational axis А4, А5, А6: 120°/s Max. interpolated speed: 2 m/s ACCURACY Repeatability: ± 0.20mm TWO 2-AXIS SERVO-DRIVEN POSITIONERS - High accuracy and minimal backlash; - Precise synchronization between robot and positioner; -High accuracy and repeatability of positioning in details; Number of axis - 2 Motor type - AC, servo Payload - 500 kg Max. speed of axis 1 & 2 - 60°/sec Nominal torque axis 1 - 1040 Nm Nominal torque axis 2 - 1040 Nm Repeatability of axis 1&2 - +/-0.01° WELDING EQUIPMENT Kemppi A7 450A MIG/MAG PULSE Power-source ROBOTIC TORCH AND COLLISION SENSOR Robotic torch set TRM612W, liquid cooled, 1.6m torch leads, collision sensor, hollow wrist

Condition: like new (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, machine/vehicle number: EQWCR/SR, arm reach: 1,434 mm, type of input current: AC, overall weight: 12 kg, input voltage: 48 V, Robotic Welding Solutions, Automatic welding solutions. Product Overview: EQ Series High-Performance Collaborative Robots This series features four primary models rebranded for precision and industrial excellence: the EQCR-7, EQCR-12, EQSR-3, and EQSR-4. These 6-axis collaborative robots are engineered to handle various industrial tasks with high repeatability and advanced safety features. Key Specifications & Performance The robots are categorized by their payload capacity and working radius: Payload & Reach: * EQCR-12: The heavy-duty model with a 12kg payload and 1434mm reach.EQCR-7: A balanced model with a 7kg payload and 988mm reach.EQSR-4: A versatile option with a 5kg payload and 919mm reach.EQSR-3: A compact solution with a 3kg payload and 705mm reach. Precision: These models offer exceptional repeatability, with the EQCR-7 achieving $\pm$0.02 mm and the other models at $\pm$0.03 mm. Bedpfxjvl Ewms Am Towr Sensing: Equipped with integrated force/torque sensing (x-y-z) at the tool flange for delicate and precise operations. Movement and Speed Degrees of Freedom: 6 axes. Joint Range: Most axes offer a full $\pm$360° rotation, providing maximum flexibility in tight spaces. TCP Speed: Maximum tool-end speeds range from 1.5m/s (EQSR-3) up to 3.2m/s (EQCR-7).Physical & Environmental Ratings Protection Level: The EQCR series boasts an IP67 rating (dust-tight and water-resistant), while the EQSR series is rated at IP54.Cleanroom Standard: All models are compliant with ISO Class 5 cleanroom environments. Operating Conditions: Designed to work in temperatures from 0°C to 50°C with up to 93% relative humidity. Control Cabinet The series is supported by the MCC control cabinet, featuring: Safety Standards: Certified to EN ISO 13849-1 (PL d, Cat. 3) with 21 integrated safety functions. Connectivity: Supports RS232, RS485, Gigabit Ethernet, USB 3.0, HDMI, and EtherCAT. User Interface: Supports "Drag-to-Teach" programming and a graphical user interface for easy deployment.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm Bwodpfx Amjxy Hqts Tsr -Weight: 7.8 kg

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Bwedpfx Amezkkays Tsr Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.