Used Wf for sale (402)

Condition: used, mileage: 275,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Itodpfx Aszn El Sjh Dok Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 184,470 km, power: 120 kW (163.15 HP), first registration: 12/2012, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals on the front sides, roof control unit with reading spot for driver/passenger side, entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rear-view mirror, rear wall with window, mud flaps on the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall trim, thermal insulation for the driver's cab, thermal protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Itedpozn Elxsfx Ah Dek Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emission according to emission standard Euro 5, seatbelt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. ambulance body from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle, box body * Bodywork by Fahrtec Systeme * Adjustable floating table * Central locking for the patient compartment * KONVEKTA air conditioning system * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system prepared * 12 + 230 volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition wall with sliding window * Ambient lighting left, right, and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tire rear axle * Extra pneumatically extendable step at the rear * Body dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from DOT 2022 with approximately 6.5 mm tread depth all around Engine, automatic transmission, and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Subject to errors, changes, and prior sale.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm Itodpfxjwz Eu No Ah Djk - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 02/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Exhaust system concept, WLTP3 N1-III, N2//EU6EA * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * One towing eye at the front * Preparation for trailer hitch (incl. trailer stabilization) * Fuel tank 75 l * Differential lock * Approved as 3.5t * Front axle, reinforced (2,100 kg load capacity) * Permissible total weight 3,500 kg * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * Tires 235/60 R 17 C 117/115 R, optimized for rolling resistance * Summer tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG 1 with ABS programming * Climatronic air conditioning in the cab * Daytime running lights with automatic assist lights, coming and leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo compartment * Fog lights incl. cornering lights * Lateral marker lights * With headlight cleaning system, with washer fluid level indicator, with heated windshield washer nozzles at the front * Step lighting * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * Normal roof * Entry handles on the rear pillars * Radiator grille, black with chrome trim * Rear wing doors with enlarged opening angle * Windshield wiper intermittent switch with light and rain sensor * Sliding door, right, in the cargo/passenger compartment * Laminated windshield with heat-insulating glazing, heated * Front bumper in gray with painted trim in vehicle color * Airbag for driver and front passenger with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders * Three-point automatic seatbelts with seatbelt height adjustment and electric belt tensioners at the front * 12-V sockets in the cab * Seatbelt warning, E-contact in the seatbelt lock * 2 remote control folding keys * Keyless Go with safe lock * Auxiliary water heater, programmable, with remote control * Chrome package * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Seat heating, separately adjustable on the driver's side * Digital instrument cluster * Tire pressure monitoring indicator * External, USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business * Digital radio reception (DAB+) * MAN Media Van Navigation Business package * Wired & Wireless App-Connect * Online service, with OCU, with head unit * Coding, without WFS connection * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * Electronic stability program (ESP) and ABS with electric differential lock * Park steering assist * ACC Stop & Go Itjdpfx Aszp A E Soh Dsk * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant 'Light Assist' * Driver fatigue detection * Lane change assist * Side wind assist * B

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min Itjdpfx Aetv Ia Tjh Dsk turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Colour: Grey Itedox Hiibspfx Ah Dek Empty weight: 1.050 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 3.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 113,879 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 3,000 kg, first registration: 08/2022, fuel consumption (urban): 7.8 l/100km, fuel consumption (extra-urban): 7.8 l/100km, fuel consumption (combined): 7.8 l/100km, CO₂ emissions: 204 g/km, emission class: euro6, energy efficiency: D, suspension: steel, number of seats: 9, total width: 2,050 mm, total height: 2,254 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, MSSA start/stop system, AIR airbag driver's side, FA01 brake assist, AUSP exterior mirrors electrically adjustable and heated, FA25 rear-view camera, KLIM air conditioning, MP3A USB connection, 25010 USB charging port, 25903 TPMS (tire pressure monitoring system), 26801 air bag, 26802 air bag passenger, 26911 air bag passenger, ABS anti-lock braking system (ABS), ASR traction control system (ASR), FA16 driver assistance system: hill start assist, ESP electronic stability program (ESP), 42938 driver assistance system: adaptive load control (LAC), 23485 windows in the cargo/passenger compartment: - passenger/cargo compartment glazed, FH2 electric windows front, SG6 6-speed transmission, 36002 rear double doors with glazing, 22800 heated rear window, 34715 upholstered headrests, 79692 heated crankcase ventilation, 69500 steering column (steering wheel) adjustable, 250 model upgrade, RDK tire pressure monitoring system, DPF diesel particulate filter, 77274 low emissions according to Euro 6d emission standard, 36208 sliding door cargo/passenger compartment right with glazing, 32091 seats in the driver's cab: driver's seat with armrest and lumbar support, WFS immobilizer (electronic), ZV central locking with remote control, 27104 storage compartment in the headliner of the driver's cab, 27120 storage compartments: luggage net on the rear doors, AIR1 airbag passenger side, 26081 dashboard Techno, 25628 infotainment system with 7" touchscreen, DAB, Bluetooth interface and Apple CarPlay / Android Auto, 1621 comfort package, TEMP speed control system (cruise control) incl. speed limiter, 39898 inductive charging. We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork was carried out on the vehicle as part of the preparation. No liability for printing and spelling errors. Errors and prior sale reserved... more on our website. Itsdpfozpxmrex Ah Dsk

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine Iodpezcmz Ejfx Ah Dotk With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: good (used), Year of construction: 1995, Milling machine Itedjp Nnp Sopfx Ah Dek

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Itsdpfx Aoyuf T Roh Dsk Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Condition: excellent (used), Manufacturer: KUNZMANN Model: WF 650 Machine type: CNC universal milling machine / CNC machining center Year of manufacture: 2007 Machine operating hours: 20,625 h Spindle operating hours: 3,909 h Control system: HEIDENHAIN iTNC 530 Working area / Travel ranges Travel range X-axis: 650 mm Travel range Y-axis: 500 mm Travel range Z-axis: 450 mm Work table Clamping area: 1,000 × 600 mm Max. table load: approx. 400 kg Main spindle Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 20 positions Controlled CNC milling head (B-axis) Vertical milling head, swiveling: -5° +95° Feeds and rapid traverses Feed range: 0–4,000 mm/min Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 20 m/min Working area Distance table – vertical milling spindle: 100–550 mm Distance table – horizontal spindle: 270–720 mm Iodpfx Ahozkl Rtj Detk Machine weight and connection values Machine weight: approx. 5,500 kg Total power consumption: approx. 20 kW Equipment CNC path control system HEIDENHAIN iTNC 530 3D probe Preparation for 4th axis Electronic handwheel Coolant system Central lubrication Machine lighting Full protection enclosure

Condition: good (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 1 rpm, spindle mount: MK 4, table length: 700 mm, table width: 425 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit Itjdsyac Hljpfx Ah Dek - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Condition: used, mileage: 235,213 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, 100 Ah battery, additional (reinforced) battery, 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading spot for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall trim, thermal insulation for the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle including stretcher and carrying chair, Stollenwerk, 1st hand * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Central locking for the patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction prepared * 12 + 230 volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting on the left, right and rear * 2x interior lighting bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti with DOT 2024 with approximately 6.0 mm tread depth all around Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Itjdpfx Aozn Emijh Dek Starter battery is new +++ Errors, changes and prior sale are reserved.

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 01/2025, fuel type: diesel, next inspection (TÜV): 01/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 6-seater double cab with partition * Exterior mirrors, electrically adjustable and heated * Height adjustment for the left individual seat in the cab * Air conditioning with manual control in the cab * Central locking with remote control and interior operation * Mobile phone interface * 2 USB interfaces (Type C) in the dashboard * App-Connect * 4 speakers: 2 tweeters, 2 woofers * Radio "Composition Colour" with 16.51 cm (6.5 inch) touch-sensitive colour display * Hill start assistant * Emergency call system eCall * ParkPilot in the rear area * Airbags for driver and front passenger, with front passenger airbag deactivation * Electromechanical power steering, speed-dependent, steering column adjustable in height and length * Start-stop system with brake energy recuperation * Immobiliser (electronic) * Side wind assist * Daytime running lights (permanently switched on during operation) * 16" chassis with 16" brake system * 2 12-volt sockets in the dashboard Ijdpfjw Tp Aasx Ah Dstk * 4-cyl. turbocharged diesel engine 2.0 L / 110 kW (4V) TDI CR * 4-cyl. diesel engine 2.0L, assembly 04L.Y * 6-speed manual gearbox * Emission standard Euro 6d ISC-FCM * Armrests for the left seat in the cab * Battery 420 A (70 Ah) * Halogen twin headlights * Daytime running light control * Front passenger double seat on the right, with lockable compartment in the seat box * Three-point automatic safety belts, height-adjustable on the outer seats in the cab, with electric belt tensioners * Electronic stability program, ABS, ASR, EDS, hill start assistant, brake assistant * Rubber floor covering in the cab * Grab handles on the roof frame, foldable * Glove compartment with lighting * Rear tailgate closing with unlocking function from the inside * Interior lighting in the cargo/passenger compartment * Comfort headliner in the cab, roof lining made of hard fibreboard in the passenger/cargo compartment * Cargo edge protection (internal) in plastic * Long wheelbase * Lumbar support for the left individual seat in the 1st row (manually adjustable) * Headlight range adjustment, automatically controlled * Online service, with OCU, without head unit coding, without WFS connection * Fuel tank with 80 l tank volume * Radio "Composition Colour" * Windshield wiper intermittent control, 4-stage adjustable, for the front windshield wipers * Side panelling (half-height) made of hard fibreboards in the cargo area * Seat on the left, in the 1st row * Seat covers in fabric, design "Double Grid" * Sun visors with ticket pocket on the driver's side and airbag label on the front passenger's sun visor * Type plate for commercial vehicle with EC type approval, with weight indication, with COC papers * Door panelling unpainted * Lashing eyes for securing cargo, reinforced (ISO 27956) * Prepared for "We Connect" and "We Connect Plus" * Laminated front windshield with heat protection glazing * Sliding door on the right, in the cargo/passenger compartment * Heat protection glass (green) * Approval as a truck * Approval with up to 3 seats * Permissible total weight 2,800 kg * Heated windshield washer nozzles at the front and windshield washer fluid level indicator * Vehicle with high-quality double cab conversion as a partition/seat combination (no cheap bench seat without a partition) Conversion service for panel van commercial vehicles possible: e.g. retrofitting tow bar 990.00 EUR, trailer load increase 714.00 EUR, front bull bar 790.00 EUR, cargo area lining from 1390.00 EUR, MIXTO conversion 6990.00 EUR, b

Condition: new, mileage: 505 km, power: 368 kW (500.34 HP), first registration: 06/2026, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Alloy wheels - Air suspension - Particulate filter - Sleeper cab Itodszu Nwxepfx Ah Dek - Side skirts - Sun visor - Auxiliary heater = Notes = Volvo FH 13.500 Globetrotter XL 4x2 NEW Retarder I-ParkCool Model Year: 2026 Mileage: 125 km New truck, full specification Retarder I-ParkCool Refrigerator Full spoiler Etc. Accessories = Further Information = Technical Information Number of cylinders: 6 GVWR: 19,000 kg Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Steerable; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Double tires; Alloy wheels; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Functional Body manufacturer: Volvo Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: used, mileage: 2,040 km, power: 130 kW (176.75 HP), first registration: 12/2024, fuel type: diesel, color: grey, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, * Approved as a 3.5t vehicle * Permissible total weight * Standard climate zones * Electronic Stability Program (ESP) * Front tow eye * Front disc brakes * All-wheel drive * Leather multifunction steering wheel with Tiptronic * Partition, with lining and fixed window * Three-point automatic seatbelts in the front with electric belt pretensioner * High roof in vehicle color * Rear wing door with window * Double seat bench in the driver's cab on the right with storage compartment * Driver's cab seat on the left * Enhanced interior noise reduction Iodpfx Ahezi Irkj Dstk * Windshield, heat-protective glass * Heated rear window with rear window wiper * Central locking "Keyless-Go" * Safety interior mirror, dimming * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust concept, WLTP3 N1-III, N2//EU6EA * Side airbags in the front, with head airbags * Glove compartment flap, lockable with light * Rubber floor covering in the driver's cab * Wooden floor in the cargo area * Lateral interior paneling in the cargo area (up to the roof frame) made of plywood * Approved as a truck * Transport protection measures * Sliding door on the right in the cargo/passenger compartment * Exterior mirror on the right, convex plus wide-angle * Exterior mirror on the left, convex plus wide-angle * Sun visors with mirror * Lashing eyes for securing cargo * Lane assist plus Emergency Assist and traffic jam assist * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Engine immobilizer, electronic * Entry handles on the rear pillar, left + right * Tire pressure monitoring, frequency 433 MHz High * Start/stop system with recuperation * Navigation system (Baseline) * Park assist * Lane change assist * Optional infotainment system (MIB3 MP) version 2 * Lateral marker lights * High beam assist * LED main headlights * Front Assist with warning and braking on vehicles, pedestrians, and cyclists * Windshield wiper intermittent operation with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control * With headlight cleaning system, with washer fluid level indicator * Climatronic with recirculation function, CFC-free * LED interior lighting concept in the passenger/cargo area * Daytime running lights with assist lights and coming/leaving home function, automatic * Comfort telephone with LTE and wireless charging * Switchable step illumination * Seatbelt monitoring, E-contact in the seatbelt lock * Wired & Wireless App-Connect * 230V inverter and socket for Europe * 4-cylinder turbo diesel engine 2.0 L / 130 KW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Driver alertness system * With socket in the front * 8-speed automatic transmission for all-wheel drive * Preparation for alcohol interlock * Battery 420A (70Ah) * Panel van * With rear view camera system (version 2) * With side wind assist * With predictive speed limiter (pLIM) * Seat covers (Robust) * With UNECE CS&SU * Pan-European eCall * Alloy wheels "Lismore" 6.5 J x 17, in black, glossy * Advanced assistance package incl. Automatic Distance Control ACC, "Intelligent Speed / Travel / Lane Assist" * Extended assistance package "Side Assist with turning assist on both sides and departure warning" * Professional assistance package incl. Park assist & parking sensors in the front and rear area incl. side protecti

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this involute gear grinding machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: max. gear diameter: 7100 mm gear width: 1500 mm max. module: 45 table diameter: 4000 mm grinding wheel diameter x width: 400 x 500 mm max. helix angle: 45 degrees hobber diameter: 500 mm hobber speed: 9–63 rpm total power consumption: 47 hp Machine weight: 160,000 kg Itsdpjxwlthsfx Ah Dok A video of the machine can be sent via WhatsApp.

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm Iedpfjgq Dclox Ah Dstk y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Iedpfx Ahjzp Uxdo Detk Thrust 500 mm --- Max. installation height 480 mm --- Weight approx. 11.2 tons --- Power 30 kW --- System tool holder + tools

Condition: used, Travel ranges and axes • X-axis (longitudinal): 600 mm • Y-axis (transverse): 400 mm • Z-axis (vertical): 420 mm Spindle Itodszh Evwjpfx Ah Djk • Speed range: 20 to 4,000 rpm • Tool holder: SK 40 (ISO 40) • Milling head: Manual • Spindle drive power: approx. 6 – 7 kW Work table • Clamping area: 900 x 460 mm • Max. table load: 400 kg • T-slots: 7 pieces (standard 14 mm H7, spacing 63 mm) Feeds and speeds • Working feed (X/Y/Z): 1 to 5,000 / 6,000 mm/min • Rapid traverse X and Y axis: 7 m/min • Rapid traverse Z axis: 6 m/min Electrical connection data and dimensions • Total power requirement: approx. 12 – 13 kW • Machine weight: approx. 2,300 kg • Space requirement (L x W x H): approx. 4.0 x 3.8 x 2.0 m Control system • CNC control: Heidenhain HS412 Technical data without guarantee Machine is fully functional and in good condition.

Condition: used, mileage: 20 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2025, emission class: euro6, color: blue, number of seats: 4, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Short wheelbase * Electronic Stability Program (ESP) * Trailer hitch * Speed-sensitive power steering (Servotronic) * Increased initial fuel tank capacity * 16-inch wheels * Leather multifunction steering wheel * Reinforced rear suspension * Additional noise reduction measures in the cab and passenger compartment * Child seat anchorages for ISO FIX child seat system * Narrow, height-adjustable headrests * Manual height adjustment, left front seat * Unpainted door paneling * Three-point automatic seat belts in the front with electric belt pretensioners * Standard roof * Rear tailgate with window * Swivel seat in the cab on the right * Seat in the cab on the left * Double bench seat, left side, with armrest on the aisle side Itodpfx Aox Ipffsh Djk * Standard acoustic package * Seat heating for front seats, individually adjustable * Exhaust system, EU6 AP * External release for rear tailgate/lid * Sliding window in passenger compartment, left side * Heated windshield with thermal protection glass * Childproof lock, electrically operated * Heated rear window with rear window wiper * Central locking with remote control and interior operation * Fixed side window in the cargo/passenger compartment, right side * Automatically dimming interior rearview mirror * Armrests for both front seats * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Glove compartment flap with light * Roof headliner in the cab as a comfort headliner, in the cargo/passenger compartment with hard fiberboard * Side paneling made of hard fiberboard in the cargo area * Approved as a passenger car * Folding grab handles on the roof frame * Sliding door, right side, in the cargo/passenger compartment * Exterior mirror housings and various exterior parts in body color * Front Assist incl. City Emergency Braking for ACC high * Radiator protection grille * Additional dust protection seal on the outside * Entry handle on the A-pillar on the driver and passenger side * Electrically adjustable exterior mirrors, separately heated * Electronic engine immobilizer * Tire pressure monitoring system * Start/Stop system with recuperation * Manually adjustable lumbar support in the front seat backrests * Standard navigation system with media and internet package * Auxiliary heater with remote control and additional heater * Parking assist system, front and rear * Optional infotainment system (MIB3) * LED main headlights with lens * Daytime running lights with automatic driving lights and manual coming home/leaving home function * Windshield wiper intermittent control with light/rain sensor * Automatic dynamic headlight range control (adjusts during driving) * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control (without follow to stop) and speed limiter * LED rear combination lights * Washer fluid level indicator * Standard interior lighting concept in passenger/cargo compartment * Alternator 160-250 A * Step lighting, sliding door(s) * Seat belt warning system, electronic contact in the seat belt buckle * Multifunction display/on-board computer "Color" * Wired & Wireless App-Connect * Phone preparation for mobile phone * 4-cylinder turbocharged diesel engine, 2.0 * Online service, with OCU, with head unit coding, without WFS connection * Driver alertness system * 6-speed manual transmission * Interface for external use * Station wagon * With rear view camera system (version 1) * Air conditioning in the front with el

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Itsdpfx Asvftrxoh Dok Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, mileage: 312,255 km, power: 120 kW (163.15 HP), first registration: 03/2014, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the frame end including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel level sensor for auxiliary heater, separator relay with additional battery, rear wall paneling, thermal insulation in the driver's cab, thermal protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/structure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liter - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emission according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover / upholstery: fabric Lima, service interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle / rear axle incl. stretcher from Stollenwerk, 1st hand * Rear axle air-suspended * Ambulance and rescue vehicle, box body * Body from Fahrtec Systeme * Adjustable floating table * Stretcher from Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Cooler compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction preparation * 12 + 230 Volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lights bright white and blue * Cab with 2 seats * 2x air conditioning front and rear * Automatic transmission * Telma retarder * Electric windows * Electric mirrors, heated * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear Itodpfx Ajzpc S Ejh Djk * Body dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti, DOT 2024, with approximately 6.0 mm tread depth in the front and 5.0 mm in the rear Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Itedpfx Ajyhnmtjh Djk Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: used, mileage: 296,516 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, 100 Ah battery, additional battery (reinforced), 1-pole battery disconnect switch, turn signals on the front sides, roof control unit with reading light on the driver/passenger side, door entry lights, additional master key, folding cover for storage compartment, programmable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall cladding, thermal insulation for the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assistant, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/structure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle * 1st owner * Air-suspended rear axle * Ambulance and rescue vehicle, box body * Body built by Fahrtec Systeme * Adjustable swivel table Ijdpfezn Elrsx Ah Djtk * Central locking for the patient compartment * KONVEKTA air conditioning system * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medicine cabinets * Prepared for oxygen and suction * 12 + 230 volt sockets * Roof hatch * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Body dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti, DOT 20254, with approximately 8.0 mm tread depth all around Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved