Used Workshop Stoves for sale (4,631)

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Iiedpfjixupuox Ag Uec Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Motor power: 11 kW Stroke: 300 mm Clear distance between columns: 1,570 mm Piston Ø: 280 x 200 mm Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Weight: 2,100 kg Iijdsd Ab Ndopfx Ag Uoc

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Isdpfsd Ab Iqjx Ag Uoic Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Year of construction: 2019, operating hours: 200 h, condition: excellent (used), functionality: fully functional, input current: 28 A, machine/vehicle number: 319009701, EILOG KUV250 annealing oven, temperature 250 degrees, year of production 2019, weight 880 kg. Capacity 1.5 m3. Iedpoyftbdjfx Ag Ujic

Condition: new, pressure: 100Cylinder: horizontal verschiebbarstroke: 350column width: 1050working speed: 2rapid traverse: 28length: 1900width: 850heigth: 2250weight approx.: 1030Horizontally adjustable cylinder: 650- Horizontally movable cylinder – 650 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation Iodpfswwngtox Ag Usic This is a stock photo

Condition: new, pressure: 20Cylinder: nicht beweglichstroke: 350column width: 520working speed: 4retracting speed: 30length: 1200width: 500heigth: 1800weight approx.: 210 Two working speeds – for precise and efficient operation Height-adjustable work table – manually adjustable for flexible use Safe two-hand operation – via hand lever and push button Iisdpfxewwnhkj Ag Uoc Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English

Condition: new, pressure: 70Cylinder: nicht beweglichstroke: 350column width: 900working speed: 3length: 1700width: 700heigth: 2100weight approx.: 650rapid traverse: 29 Two working speeds – for precise and efficient operation Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Ijdpfx Aewwnh Deg Usic Operating manual – available in German and English This is a stock photo

Condition: new, pressure: 100Cylinder: nicht beweglichstroke: 350column width: 1050working speed: 2rapid traverse: 28length: 1900width: 850heigth: 2250weight approx.: 1030 Height-adjustable work table – by chain adjustable for flexible use Iiodjwwng Hepfx Ag Uec Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo

Condition: new, pressure: 40Cylinder: nicht beweglichstroke: 350column width: 900working speed: 4length: 1600width: 700heigth: 2050weight approx.: 430 Two working speeds – for precise and efficient operation Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Isdpfx Agewwnhqe Uoic Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English This is a stock photo

Condition: new, pressure: 1500Cylinder: nicht beweglichstroke: 350column width: 1500working speed: 3rapid traverse: 22length: 2500width: 1200heigth: 2500weight approx.: 2450Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Iedpfewwnhdsx Ag Ujic Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo

Condition: new, pressure: 100Cylinder: horizontal verschiebbarstroke: 350column width: 1500working speed: 2rapid traverse: 28length: 2400width: 1000heigth: 2250weight approx.: 1500Horizontally adjustable cylinder: 1150- Horizontally movable cylinder – 1150 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Isdpewwngyefx Ag Usic Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo

Condition: new, pressure: 150Cylinder: horizontal verschiebbarstroke: 350column width: 1500working speed: 3rapid traverse: 22length: 2500width: 1200heigth: 2500weight approx.: 2500Horizontally adjustable cylinder: 1000- Horizontally movable cylinder – 1000 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo Iiodpfx Agjwwng To Uoc

Condition: new, pressure: 70Cylinder: horizontal verschiebbarstroke: 350column width: 900working speed: 3length: 1700width: 700heigth: 2100weight approx.: 650rapid traverse: 29Horizontally adjustable cylinder: 550 - Horizontally adjustable cylinder - 550 mm Two working speeds – for precise and efficient operation Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Iedpfx Aowwnhwsg Usic Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English This is a stock photo

Condition: like new (used), Gas countertop stove with 2 burners; each 5.5 kW Purchase date: 2021, week 47 Iodpfxjxgppxs Ag Ujic Manufacturer: Electrolux Dimensions (W x D x H): 400 x 730 x 250 mm Model: E7GCGD2C00 Gas connection rating: 11 kW Weight: 20 kg Main connections at the rear Front access to all components. Unit with service channel for easy installation.

Condition: new, Year of construction: 2026, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Iijdpouc Tn Aefx Ag Usc Dimensions: 770 x 600 x 1330 mm Air adjustment Pneumatic gun Illuminated cabin Ventilation We kindly inform you that the washer is for self-assembly.

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Iedpfx Agorh Ey Rj Usic Technical data: Tank capacity 140L Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Isdpfxsvugwmo Ag Ujic Dimensions: 770x610x700mm

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. The device requires self-assembly. Technical data: Iiedpfx Agjvugvvo Usc Bathtub capacity 80L Maximum pump capacity 10-12 l/min Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Condition: new, Year of construction: 2026, Device description Welding tables in system 16 allow the use of many additional accessories, such as: screw clamps ratchet clamps mounting columns widening feet locking pins bumpers angular handles Front part is made of thick, 4 mm thick galvanized steel. The primary purpose is welding aluminum, stainless steel or carbon steel from thin and thick-walled profiles. The solid device structure allows not only welding table use, but also locksmithing and repairs with the use of physical force. Parameters Dimensions (LxWxH) 915 x 460 x 885 mm Shelf height 310 mm Holes Ø16 spacing 100 x 100 mm - 45 pcs Lifting capacity 540kg Iedpowwq U Tefx Ag Ujic TOP THICKNESS 4 mm Manufacturer: Cormak

Year of construction: 2019, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, For sale: used Coffed SR60 coffee roaster. Iedpfx Ajwrzxreg Ueic Year of manufacture: 2019, the roaster is in very good condition. Less than 8,000 operating hours. Batch size: 30–60 kg Capacity: 240 kg/h Roasting time: 8–20 minutes Complete set for sale: - SR60 roaster - Two burners (LPG/natural gas) - Green coffee feeder - Water softener Paid installation at the customer's site is possible.

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 Iisdpfjgvaazex Ag Uec - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: Iijdpfx Agjri Rn Us Uec - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Condition: new, Year of construction: 2025, WORKSHOP HYDRAULIC PRESS MODEL HD120 MOTOR AND HAND OPERATED MOVABLE CYLINDER/ 120 TON Ram Cylinder Capacity (Ton) 120 ton Cylinder diameter 200 mm Ø Iodpfx Agowbtp Io Ueic Working size (mm) 1200 x 400 mm Stroke (mm) 400mm Daylight (mm) 900mm Advance Speed (mm/sec) 9 mm/sec Return Speed (mm/sec) 14.8 mm/sec Motor (Kw) 5.5 KW Pump (liters) 17 liters Overall dimension (LxWxH) 1000 x 1900 x 2450 mm Weight (Kg) 1250 kg

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Ijdpfx Agjzarv Ao Ueic Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Isdpfxezarp Ne Ag Ueic Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction