Used Wrapping Machine for sale (64,330)

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Dkedjxfl Izopfx Apwsl Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 8868, Technical characteristics: Work Area # Table diameter: 1.2 m # Manual and automatic mode: available # Maximum height: 2.20 m # Adjustable speed and tension. # Maximum load: 1500 kg Electrical Equipment # Operating voltage: 230 V / 10A Machine status: WORKING Djdpfx Apjyanixjwekl

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Dkjdpfxexu Agme Apwel

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Dodpfox R D Adjx Apwokl Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Condition: good (used), Item: M-3007-Cama-MP135 Multipack Machine Cama MP135 Cama MP 135 automatic multipack machines for the packaging containers in overwrapping cardboard sleeves. Example for capacity: 100 gr cream cheese Ø84 X 61,5 mm/ 90 pieces/min Dkodpfx Asl Ayhxopwol We can present documentation. For more photos please contact us

Condition: used, Year of construction: 2008, Manufacturer : CAM Model: AP Year: 2008 Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Dkodpfxsx R A Dgj Apwjl Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: Ø 70 - 76 mm Roll: max. Ø 320 mm Width: 100 - 400 mm  

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Dodpfeyhc Dysx Apwokl Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Year of construction: 2025, condition: as good as new (ex-display), Degree of automation Automatic / fully automatic Ring diameter/inner diameter (mm) 450 Total machine length (mm) 2200 Total machine weight (kg) 320 Max rotation speed (RPM) 90 Supply voltage/voltage (V) 230 V 1Ph+N 50/60 H Total installed power (kW) 0.75 Crown weight (kg) 12.3 kg Dkjdpfx Apon Ar T Djwjl Minimum. Packing / Minimum product (mm) 100x18x450 (with short partial bridge) Working pressure/pressure (bar) 6 Price includes training and instruction in our demonstration center. Free test of the material you have available Siede guide for additional costs

Condition: used, capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14 Technical Details : working direction : left-right, rotative, clockwise capacity bph max. : 6000 labels : hot melt labels number of labelling stations : 1 number of bottle plates : 8 motor height adjustment : yes speed adjusment : frequence converter Dkodpfx Asxytq Hspwel

Year of construction: 2023, condition: new, functionality: fully functional, Stretch wrapper type MP-206 Compact, semi-automatic stretch wrapper with modern PLC control incl. color soft-touch display and film pre-stretching. EU Declaration of Conformity.mechanical engineering in accordance with the current Machinery Directive 2006/42/EC (valid since 29.12.2009) Details and technical data Machine dimensions - Length 2,500 mm - Width 1,500 mm - Turntable diameter 1,500 mm - Turntable height 70 mm - Machine weight 600 kg - Column height 2,580 mm - Max. Pallet height 2,400 mm - Max. Pallet weight 2,000 kg - Voltage 230V, 1Ph+N+PE, 50Hz, 16A Technical equipment - Electronically controlled soft start of the turntable - Uncomplicated, quick change of the stretch film roll - Adjustment of the film pre-tension by exchanging gear sets (150%, 200%, 300%) - Photocell for automatic height detection - Turntable speed infinitely variable between 0-15 rpm - Intuitive control via color soft-touch display Dksdpouufh Hefx Apwel Control panel with 1) Colored soft touch display 2) Winding start button 3) Emergency stop switch 4) Main switch Setting options on the display - Adjustable number of foot windings - Adjustable number of main windings - Adjustable number of head windings - Special function for attaching cover foils

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Dkedpfx Asy N Ak Ropwol Knee Travel: Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Dksdpsx Hp I Rsfx Apwjl Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dkjdpfx Apoy Ni Ivewol Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: Dkedpfxsyzf Nas Apwjl X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Dodpexxb Rrefx Apwjkl For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Dkodpsya H Nkjfx Apwsl Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Dodeyaywhspfx Apwokl Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Dkjdpjx D Tbmefx Apwol Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Dkodpfx Apow Hb T Sowel Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Djdpfx Aext Ibyjpwskl Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm Dksdpey Du N Ujfx Apwjl SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm Dedpjy Nd Sisfx Apwjkl spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Dkedpfx Askzi Uljpwel

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 Dodpfxsxni Iqe Apwekl 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Dodpfxoxnizdo Apwekl Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.