Used Xas 125 for sale (3,633)

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: Itsdpfx Adecnw U Dedob With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, Year of construction: 2011, operating hours: 382 h, load capacity: 1,250 kg, lifting height: 3,350 mm, fuel type: electric, construction height: 1,700 mm, gearing type: automatic, Toyota SPE 125L high-lift stacker, year of manufacture: 2011, operating hours: only 382!, previous owner: Bundeswehr (German Armed Forces), rated load capacity: 1,250 kg, lift height: 3,350 mm, triplex mast, battery: 14/2022, including charger, overall height: 1,700 mm, in good condition, immediately ready for use! On request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale! Isdpfxjxmmnls Addstb

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos Ijdpfx Adeg Avqcjdstb -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-125-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available Price: per piece -Dimensions: 260/85/H55 mm Itedpfx Adexwll Dsdob -Weight: 2.0 kg/pc.

Condition: excellent (used), ELIN EBG electric motor MUP 125 F04 ZWZ Iodpewnfncofx Addotb

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane Itjdpfx Asxmi R Asddob -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Iedpjrbiyfsfx Addetb Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), SLM Solutions Isdpju Ebufjfx Addotb Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm Ijdeyatx Espfx Addjtb

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm Ijdpfewmbp Tex Addjtb -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm Iodpfx Aox H Rtnsddetb - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg Iodpfob A Rdqex Addotb

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm Iedpfx Adjb A Rdledotb -exciting: centric -Replaceable jaws: soft -Weight: 6 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes Ijdpfxeb A Rkdo Addetb -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 Iedpfjb A Nurjx Addjtb -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Condition: new, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Itjdpox Sq Hlsfx Addjb Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: Itjdpfxewdta Ee Addeb - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Iedpfx Aemmbn Tsddjtb Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! Isdpfx Adeu Idw Ijdotb - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: used, Year of construction: 2018, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm Isdpfx Asu Utmpjddetb height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. Ijdpfx Aeu Idwbjddetb *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm Itodpfsu Nfibox Addob ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed Iedsu Idvkopfx Addstb i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles Itjdpfxou Idwnj Addsb - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Itsdpfxeu Nwwqe Addsb Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *