Recirculating Chiller, liquid cooler

Neslab cft 300

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Gbsdpfxsvby U Se Adbji Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Gbodpfx Adjdz Er Rjbei Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

Condition: excellent (used), Year of construction: 2008, Spinner TS66L-SMC CNC Lathe with Sub-Spindle Gbjdsxptz Repfx Adbei Year of manufacture: 2008 Control: FANUC 18i-TB Turning diameter: 400 mm Turning length: 640 mm Bar capacity: 66 mm Swing diameter: 685 mm Travel (X-axis): 240 mm Travel (Z-axis): 640 mm Main spindle speed: 4,000 rpm Sub-spindle speed: 5,000 rpm Main spindle bore: 73 mm Sub-spindle bore: 43 mm C-axis: 0.001° Turret: 12 positions, all driven Tool holder: VDI 30 Driven tools: 9 kW Driven tool speed: 4,000 rpm Feed rate, stepless: 500 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Spindle motor power: 19 / 14 kW Machine weight: approx. 5.7 t Space requirements: approx. 2.35 x 1.65 x 1.85 m

Condition: used, TECHNICAL DETAILS - Number of axes : 4 Gsdpfouhbv Sjx Adbobi MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC Gedpfxjuhatpj Adbebi - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros Gjdsd Erdrspfx Adbebi # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Manufacturer Quaser Gbodpfxjxx Shho Adbsi Model MV184P/12B Year of manufacture 2015 Condition (Used) Excellent Control Heidenhain 530iTNC Equipment 4th axis and tailstock, spindle probe, tool probe, tool holders, conveyor, tool changer switch Machine specifications X-axis travel 1020 mm Y-axis travel 610 mm Z-axis travel 610 mm Max. workpiece weight 500 kg Spindle speed 12,000 rpm Table size 1200 x 600 mm 30-position tool changer BT40

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 1606-I0019, Oil cooler for DMG SL-150 MC machine Weight: 68 KG Dimensions L x W x H: approx. 1040 x 320 x 400 mm Max. 5 operating hours Manufacturer according to label: Kouwakougyo Co. LTD. Gjdpfxjiby Skj Adbsbi

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET031P5-NF - 2200320880, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler / chiller / air-cooled water chiller Type: TAEevo Tech 031 P5-NF Manufacturer: MTA S.p.A. The TAEevo Tech 031 P5-NF is a compact, air-cooled water chiller unit designed for outdoor installation (from -5°C to +46°C). Features include a crankcase heater, phase monitoring, 115-liter buffer tank, built-in P5 high-pressure pump, open 14-liter expansion vessel, and a non-ferrous evaporator. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 8.98 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 1.5 Available pump pressure (bar): 5 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input (kW): 6.6 Max current (A): 12 Starting current (A): 47 Protection rating: IP54 Dimensions: Length (mm): 1315, Width (mm): 660, Height (mm): 1373 Weight (kg): 331 Connection: Rp 1" Serial No.: 2200320880 Year of manufacture: 2018 Condition: Cosmetically 2-3, technically OK Used Price: On request in euros (plus VAT, ex Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. Gbedpfx Ajw S Ef Iodbji (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TET MINI M05 - 2200422920, cooling capacity: 1.73 kW (2.35 HP), type of input current: AC, type of cooling: water, overall weight: 71 kg, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 230 V, temperature: 7 °C, volume flow: 0.286 m³/h, pump pressure: 3.342 bar, total width: 486 mm, total length: 660 mm, total height: 623 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo TECH MINI M05 MTA S.p.A. The TAEevo TECH MINI M05 are compact water chillers suitable for indoor installation. Includes buffer tank (open system, not a pressurized tank) and built-in circulation pump. Cooling capacity: 1.73 kW Chilled water temp. outlet/inlet: 7 / 12°C Flow rate: 0.286 m³/h Available pump pressure: 3.342 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical Data: Voltage: 230 V, Frequency: 50 Hz, Phase: 1 Ph Max. power consumption: 1.6 kW Max. current: 7.5 A Starting current: 20 A Protection class: IP33 Dimensions: Length: 660 mm, Width: 486 mm, Height: 623 mm Weight: 71 kg Connection: Rp 1/2" Serial No.: 2200422920 Year of manufacture: 2025 Condition: Visual 2, Technically OK Used Used machines may have visual defects due to previous use. Gedpjxc Ud Tofx Adbjbi (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal