Hydraulicsaggregat 3.0 kW 1430 rpm

Orsta Hydraulik A10 TGL 10859

Year of construction: 2009, condition: good (used), Load capacity: 30 t Gbedjqiz N Ropfx Adboi Fine lift Lifting height 9 meters

Condition: used, Year of construction: 1988, tail stock ja ja condition nicht geprüft Gsdpfx Adeu Su I Eobjbi weight of the machine ca. 3,8 t

Condition: excellent (used), Year of construction: 2007, operating hours: 1,154 h, For sale fully functional and ready for further work mini chain excavator so-called Trencher from one of the best companies on the market, which is Vermeer. We have many machines and devices from this manufacturer, we service them on site. We offer all kinds of machines that help in work in gardens, etc. Vermeer RTX100 is ideal for making strips for cables or pipes. Thanks to the saw that is installed, it is possible to dig up to a meter. The last service of the machine was at 1148mth, so relatively recently. Engine: Kohler CHL15 15 HP Gjdpfewbtytox Adbjbi Single Cylinder Gasoline Capacities Fuel Tank: (6.1 l) Hydraulic Tank: (37.8 l) Hydraulic System: (39.7 l) Engine Oil: (1.13 l) Hydraulic System Pump Type: Tandem Piston Pump Ground Drive gpm @ Max Engine RPM: (20.4 l/min) Implement Pump gpm @ Max Engine RPM: (41.6 l/min) Ground Drive Ground Drive Type: Hydrostatic Maximum Forward Transport Speed @ Full Throttle: (64 m/min) Maximum Reverse Transport Speed @ Full Throttle: (25.9 m/min) Steering Type: VZ Steering Trench Excavator Boom Length: (91.4 cm) Cutter Width: (15.2 cm) Auger Diameter: (40.6 cm) Auger Outer Bearing Support: Standard Crusher: Optional Safe Strap: Standard Shipping Dimensions: Weight (Basic Tractor with Tires): 910 lbs (412.7 kg) Length (Basic Tractor): 81.4" (206.7 cm) Width (Basic Tractor with Tires): 35" (88.9 cm) Height (Basic Tractor with Tires): 46" (116.8 cm) Wheel Tread from Axle Centerline: 34.2" (86.8 cm) Tread Width (tires): 8.5" (21.5 cm) Track contact length: 19" (48.2 cm) Track width: 7" (17.7 cm) Note! The price is in net value For Export and for companies to deduct VAT, net values apply. For individual customers, a discount is possible - We invite you to contact us directly by phone to get your best price :)

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Gsdoqagl Hopfx Adbjbi Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Gbjdpfx Adsdlm Dhjboi Weight: 1200 kg

Condition: good (used), Year of construction: 1969, Pneumatic gluing press, Gjdpfx Aod Dxqbodbobi pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Condition: used, color: yellow, first registration: 01/1995, * Manufacturer: HYSTER,* Type: H2.50XM,* Serial No.: D177B22181S,* Attachment: S/S 2.00-1.50 1067 mm,* Year of manufacture: 1995,* Drive: Diesel,* Operating hours: 18151.8 h,* Unladen weight: 4265 kg,* Reverse tilt: 6 degrees,* Tire size: 7.0 x 12 (front). 6.0 x 9 (rear),* Tire pressure: 0 (front / rear),* Track width: 1125 mm,* Lifting capacity with vertical mast and additional equipment as specified above,* Lifting height: 5550 mm,* Load capacity: 2040 kg at 500 mm, 1860 kg at 600 mm, 1710 kg at 700 mm, subject to alterations, prior sale and errors excepted. Gsdji Tfapjpfx Adbjbi

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Gbodpfx Asqc Ul Ajdboi Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .

Condition: used, Year of construction: 2009, 7 vertical indoor fermentation tanks Additional title: vertical, coolable tanks from stainless steel Max. content: 2500 l Max. pressure: 1 bar Gbedpfx Adoxbn Naebji Max. temp.: 50 °C Width: 1366 mm Height: 3820 mm Weight: 800 kg Material: stainless steel 1.4301 Position: vertical tank Base construction: on pipe feet with skull cap Features: with cooling, insulation and stainless steel cladding, manhole in the frame, sampler, tank top fittings, bunging device, conical bottom with central outlet

Condition: excellent (used), Year of construction: 1995, Centre Height: 330 mm Gsdex Sx Htopfx Adbebi Centre Distance: 2,000 mm Working Area: Max. Swing Diameter over Bed Cover: 650 mm Max. Swing Diameter over Cross Slide: 360 mm Main Spindle: Spindle Diameter at Front Bearing: 140 mm Spindle Bore: 107 mm Main Drive: 58.5 kW 2-step Speed Range: 4 – 750 rpm / 750 – 3,060 rpm Feed Drive: Rapid Traverse X/Z Axis: 10/10 m/min Tool Turret: Number of Tool Stations: 12 Of which Driven Tool Stations: 6 Tool Shank Holder: VDI 50 mm Dimensions / Weight: Footprint (L x W x H): approx. 6,400 x 2,150 x 2,000 mm Weight: 9,400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-station turret, VDI 50, including 6 driven tools in turret, brand SAUTER, DIN 5482 B 20x17, max. speed 3,000 rpm • Hydraulic 3-jaw chuck, Ø 315 mm, with various chuck jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • LTA make air extraction system • Various VDI 50 tool holders • CE compliant In 08 / 2025, the following parts were replaced by GILDEMEISTER service: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single regeneration module, 1 control insert for 1 axis, 1 control module for 2 axes of the inverter servo drive, 1 Simodrive power module for 1-axis motor. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel