Folding machine

Palamides Delta 502

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Hnodpfx Aasxd U Sajdjh Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h. Hodpfx Ajl Eyq Rjadonh

Year of construction: 2006, condition: good (used), machine/vehicle number: 1452, Control panel with display Hnjdpfxok Izqts Aadjh

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Equipment: compressor, Pallet feeder 6 buckles Hnjdpow D Ur Aofx Aadoh 2 knives 1 side buckle SBP 66 press delivery Compressor Glue unit

Condition: excellent (used), ATS-TANNER CE 240/30 banding machine Hnjdpev U Sgtofx Aadeh

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Banding machine with temperature welding Band width 30mm Paper and film can be used as banding material Cooling time setting Extras: Jumbo dispenser 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty. Hjdpfsvthwfjx Aadjnh

Condition: new, functionality: fully functional, input voltage: 230 V, Cobot palletising solution - Relieves employees from heavy lifting and monotonous physical strain - System can be configured and adapted to individual requirements Hnsdpjrbz Rxefx Aadjh - Requires less floor space than conventional palletising solutions (dimensions: 2,650 x 1,600 mm) - No stationary safety technology required, making UNIPAL easy and flexible to use - Dashboard for process overview - Up to 22 kg payload and 2,200 mm palletising height - Fast and easy retooling - Plug-and-play (requires 230 V mains supply) and 6 bar compressed air

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Hsdpfx Aaeiyya Asdsnh Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery Hodpfx Aew I S Eyoadjnh - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: used, The Horizon APC-T61 is a high-performance hydraulic guillotine designed for precision cutting, ideal for small and medium-sized printers and binderies. This machine is practically new, fully operational, and ready for immediate production. Key features of the APC-T61 include its ability to save programs to memory, an electronic digital display with an accuracy of 1/10 mm, and easy program initiation with a Zollstart Zoll button. The knife beam and hydraulic pressure drive ensure precise and efficient cutting. Hnsdpfx Aaow Irlgjdjh Technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Batch depth: 620 mm Pile height: 100 mm Power supply: 380V / 50Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive set of accessories, including a spare knife, shaft, operating tools, tapping block, and manual. Currently in stock and located in Germany, the Horizon APC-T61 Hydraulic Guillotine is a reliable and efficient solution for your cutting needs. Format: 610 mm Equipment: Horizon APC-T61 Hydraulic guillotineThe machine is practically new, fully operational, ready for h-performance, precise hydraulic cutter ??? for small and medium-sized printers, bindery Control:Ability to save programs to memoryelectronic digital display with an accuracy of 1/10 mmstarting the program with the Zollstart Zoll buttonKnife beam and hydraulic pressure drivecutting linepre Technical data:Cutting length 610 mm 620 mm batch depth Pile height 100 mmPower supply 380V / 50Hz3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manu