Linear drive toothed belt

Parker Hauser** Verfahrweg 1230 mm

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water Bedpfx Aash S Nz Ssajda - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm Bdodst Hw T Sopfx Aaasa total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Bdjdpfow U Uh Dsx Aaasa Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: excellent (used), Welding rotary table Focker Strähler 8 tons 8000 Kg load capacity with hand and foot remote control Speed and inclination infinitely variable 0,02 U/min to 1,1 U/min diameter 1500mm height tilted to the middle 1170mm height horizontal 1400mm length 2400mm Bedpfx Aajf Ezdneasda width 1500mm condition optically and technically perfect, runs very quietly

Condition: used, Module milling cutter Module 8 20 degrees Length 1800 mm Bedpfxedklt Ne Aaaoda Diameter 120 mm inside 40 mm

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Bdodpfx Aajh Ek Dasaja - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), DANOBAT RTM 2500 – CNC Surface grinding machine | 2.500 mm Travel | 3.100 kg Table load High-capacity surface grinder designed for precision flat machining of large workpieces. Robust, accurate, and ready for demanding production environments. 🛠 Key technical features: • Max. grinding length: 2,500 mm • Max. grinding width (with 100 mm wheel): 900 mm • Max. grinding height (with Ø500 mm wheel): 1,000 mm • Table surface area: 2,500 x 800 mm • Max. table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • X-axis travel: 2,650 mm at 1–30 m/min • Z-axis travel (cross): 800 mm • Y-axis travel (vertical): 1,150 mm • Z feed speed: up to 8,000 mm/min • Y feed speed: up to 1,000 mm/min • Positioning resolution: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding head details: • Wheel diameter: 500 mm • Bore diameter: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Nominal speed: 1,000 rpm • Grinding motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Prismatic guideways with Turcite coating • Angular grinding head • Paper band filtration system • Hydraulic unit power: 4 kW Bdedpfjhq Ui Ijx Aaasa 📌 Perfect for high-precision large-part surface grinding. A solid solution for manufacturers who require size, stability, and sub-micron accuracy.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle speed (max.): 15,000 rpm, MMV 4200 GANTRY-TYPE MACHINING CENTER FOR 5-AXIS SIMULTANEOUS MACHINING WITH HEIDENHAIN TNC 640 5-axis simultaneous gantry-type machining center with integrated water-cooled motor spindle. Control: HEIDENHAIN TNC 640 • Conversational programming • USB and Ethernet interface • 24" TFT color monitor • 3D visualization, programming graphics Spindle: Water-cooled motor spindle Spindle power: 46 kW Spindle speed: 50 - 15,000 rpm Bodpfx Aajychf Seasda Spindle torque: 170 Nm Tool holder: ISO 40 DIN 69871 Pull stud: ISO7388/2 Type B (not included in the basic version) Travel: X = 4200 mm, Y = 1000 mm, Z = 950 mm Distance spindle nose to table: 0-950 mm Rapid traverse (X-Y-Z): 60/50/50 m/min B/C axis: 50/100 rpm Fixed table: Cast iron table with T-slots Number - width - spacing: 7 - 18 mm - 125 mm (central alignment slot 18H8) Clamping surface: 4400 x 1050 mm Maximum table load: 6000 kg (evenly distributed) Swivel head (B axis): Torque motor, swivel range +120°/-120° Rotary table (C axis): Torque motor, table diameter 900 mm Maximum table load: 2000 kg Rotary table accuracy: 0.05 mm +/-0.02 mm, recessed under the fixed table Stationary tool changer: Drum magazine on the left side of the machine with 40 tool stations Tool change time (chip-to-chip, VDI2852): approx. 15s Coolant pump: Pressure 6 bar, delivery rate 40 l/min (nominal at pump) Work area lighting: 4 LED lamps Standard equipment: • Linear glass scales in X/Y/Z axes • Central lubrication with grease • Handwheel • Alarm lamp • Work area lighting • Electrical cabinet air conditioner

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Bdedpjwz Rg Defx Aaaea Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Standard for clean rooms - ISO 14644-1: Level 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest. Bdedopd In Depfx Aaaoa