Heat exchanger / vacuum unit

Prang, Alco WT-36-50-2, ZN 6466

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Itedpfx Agowd Talj Ueh

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Itsdpfx Agswvq E Ao Ueh

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet Ijdjrai N Aopfx Ag Uoth

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Made of stainless steel. Itodpfx Aocl Tt Rsg Uoh Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Condition: good (used), functionality: fully functional, Maurer-Atmos Smoking Chamber for 3 Trolleys Manufacturer: Maurer-Atmos Device type: Smoking and cooking chamber with friction smoke generator The Maurer-Atmos smoking chamber is designed for thermal processing (smoking, drying, cooking) of meat, fish, and sausage products. Equipped with a friction smoke generator, this unit allows for both hot and cold smoking, ensuring excellent product quality, color, and aroma. Capacity: 3 smoke trolleys Internal dimensions: 3100 × 1100 × 2000 mm Overall dimensions: 4000 × 1800 × 3300 mm Itsdpfx Aoxtvh Ieg Ujh Smoke generator type: Friction smoke generator The Maurer-Atmos chamber is a reliable, industrial solution for meat processing plants and food processors, enabling uniform smoking and thermal processing of up to three trolleys simultaneously. The use of a friction smoke generator allows for efficient consumption of smoking material and consistent, high-quality results.

Condition: used, Surface planer available in 2-sided or 4-sided version REX HOMS Working width max. 2050 mm Working height max. 310 mm including swivel ring Iodpfx Aeyid Uyog Ujth The 8 images show a REX HOMS 2050 in water blue color; it was refurbished and delivered by jöma several years ago.

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit Itodpfx Aoyt H Dnog Ush * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: like new (used), Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Itedpfx Agouu D Dge Ush Electric Power: 1.5 kW Machine Size: 730x390x900 mm

Condition: good (used), filter area: 21 m², pressure: 15 bar, cake thickness: 25 mm, System: Chamber filter press Rittershaus & Blecher Type: 0-22-080-2230-00 Design: Chamber filter press Filter plate format: 800x800/59 Cake thickness: 30 mm Year of construction: 1989 Number of plates: 24 pieces Iedpfoqakdbsx Ag Ujth Filter cloths: optionally available in coordination with the medium Press capacity: approx. 310 dm3 / final capacity approx. 430 dm3 Filter area: approx. 21 m2 / 29 m2 Filter pressure: approx. 15 bar Dimensions LxWxH 5480x2000x2660 mm Safety device: e.g. light barrier etc. optional by arrangement Purchase or rental: Inspections of the systems by arrangement at our factory. Miscellaneous: We can supply the system used and ready for operation or refurbished according to your wishes and requirements; would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts 30, 22, 18.5 kW 1 top calibrating sander equipped with 3 top belts Iedpfsw A A Enex Ag Ujth