Probst Power Generator EU 22 i - Year 2025

Probst EU 22 i

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. Ledpfey R U Nzjx Al Noac These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Ledpfsua Tl Aex Al Noac Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Available immediately – Get in and get started right away! 🔥 SUMMER PROMOTION: SET PRICE ONLY €14,999 net plus VAT 🔥 Are you looking for a reliable, modern, and immediately ready-to-use mini excavator in the 2.0-tonne class? The LT-20 PRO from Tec-Point GmbH impresses with its high performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for confined construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cabin with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability Laodpfxex Hg D Ao Al Nsc ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2000 kg Transport weight: 1820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket volume: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Climbing ability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cabin incl. heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Radio ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel structure for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditch bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ✅ Hydraulic quick coupler ➡️ Immediately ready for any construction site! ➕ OPTIONAL ACCESSORIES AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & WARRANTY 12 months warranty throughout Europe Spare parts & service directly from stock in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Delivery throughout Europe possible upon request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our location. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at a summer price of €14,999 net🔥 Secure this advantage now – the offer is only valid for a limited time! Request now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally!

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. Lasdpfxjwittpj Al Njc We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: like new (used), Year of construction: 2015, overall weight: 5,000 kg, fuel type: diesel, power: 455 kW (618.63 HP), output current: 820 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 455 kW (618.63 HP), nominal power (apparent): 570 kVA, continuous power (apparent): 570 kVA, total length: 4,500 mm, total width: 1,700 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo Penta, type of cooling: water, For sale is an emergency generator set with 580 kVA / 440 kW in very good condition. Condition: used, as new, fully functional, tested! Rated output: 580 kVA / 440 kW Engine type: Volvo Penta TAD1642GE Operating hours: 150 h Year of manufacture: 2015 Voltage: 400/230 V Frequency: 50 Hz Speed: 1,500 rpm Condition: fully operational, ready for use, tested Includes new maintenance Includes diesel tank Includes batteries Laodpovgql Esfx Al Njc Completely operational, immediately ready for use Price: net €38,000 plus VAT

Condition: excellent (used), Year of construction: 1998, operating hours: 1,227 h, overall weight: 4,800 kg, fuel type: diesel, tank capacity: 1,000 l, color: grey, power: 280 kW (380.69 HP), output current: 504 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 280 kW (380.69 HP), nominal power (apparent): 350 kVA, total length: 4,500 mm, total width: 1,600 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Iveco, type of cooling: water, We have a used emergency power generator/grid replacement system for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 12V396 (used in ships, locomotives, tanks, and industrial generators) Rated power: 1250 kVA / 1,000 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Lodpfxst Agwxs Al Njac Operating hours: approx. 287 hours (emergency power operation) - Includes batteries - Includes diesel tank - Includes circuit breaker - Includes new control system (island operation) - Includes engine cooler - Upon request and for an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Dimensions: 500x180x200 cm (L x W x H) Weight: 8,500 kg The emergency power generator will be delivered in an operational condition, including a documented load test lasting 60 minutes. Upon request, the generator can also be installed in a soundproof 30-foot container as a compact all-in-one unit. Delivery, installation, and commissioning are possible for an additional charge. Prices (net): - €58,000 per unit (without container) - €69,000 per unit (including container installation) Further offers can be found at:

Condition: new, functionality: fully functional, color: white, overall weight: 515 kg, Year of construction: 2025, machine/vehicle number: IC8-12V, Infracube IC8-12V Diesel Container IBC - Dimensions LxWxH (mm): 1485 x 1150 x 1295 - Capacity: 800 litres - Weight: 515 kg - 12 volt pump with digital flow meter - 4 metres of hose and automatic nozzle - Fork sleeves on all four sides and lifting points Laodpsxt Izysfx Al Njc UN, TÜV, ADR

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Lasdpjx H Nlisfx Al Nec Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: new, functionality: fully functional, power: 480 kW (652.62 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 840 A, type of input current: three-phase, overall weight: 2,290 kg, protection type (IP code): IP55, New AC Siemens motor Type: 1LE56033BB590AK5-Z Construction: IM1001-B3 Laodpfxow Tiu Ne Al Nsc Standard: IEC60034-1 Operating class: S9 Input voltage: 400/690 Input current: 2 x 640 Power Pn kW: 840/485 RPM: 1491 Power factor: 0.86 Frequency: 50Hz

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm Lodpfx Aljyalqyo Noac E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.