Manual Powder Coating Spraygun
PROTON PC200

Name: PROTON PC200
Brand: PROTON
Price: 1750 EUR
Availability: InStock

EXW Fixed price plus VAT

€1,750

Condition

New

Location

Luckenwalde Germany

Manual Powder Coating Spraygun PROTON PC200

Basic data

Machine type:: Manual Powder Coating Spraygun

Manufacturer:: PROTON

Model:: PC200

Condition:: new

Price & Location

EXW Fixed price plus VAT

€1,750

Location:: Anhaltstraße 30, 14943 Luckenwalde, Deutschland

Call

Details about the offer

Listing ID:: A3128430

Update:: 14.12.2024

Description

⭐⭐⭐⭐⭐ (5.0)
⚡️ Top service ⚡️ Fast delivery ⚡️ Great support!

✅✅✅Energy class A+++✅✅✅

€1750 EX. VAT
(transport costs on request)
►►Buy It Now◄◄

This product is only sold outside Europe.

➖➖➖➖➖
►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►►

✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨

Benefit from Proton's 40 years of experience in surface coating technologies.
➖➖➖➖➖

☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️

✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments.
This paint gun set is designed with stronger and more stable structure.

✨Works with any powder:
Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder.

✨Optimal ergonomics:
The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating.

✨Regardless of the conditions:
No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment.

✨These devices can take a beating...
Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment.

Prjdpfxsc Utdrs Abuec
All equipment is new, not used.

Do you want a special configuration ❗ Call us now❗

✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅
✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅

☀️ 2 YEAR WARRANTY ☀️

*This product is only sold outside Europe.

Documents

3128430-01.pdf
3128430-02.pdf

Seller

Registered since: 2017

49 listings online

Call

Send inquiry

Telephone & Fax

+49 3371 ... show

These listings may also fit your interest.

Listing

CNC glass working centre NEPTUN QUICKMILL 160-30 NC

Velžys

1,744 km

CNC glass working centre
NEPTUNQUICKMILL 160-30 NC

Call

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Podpsrzazysfx Abuorc Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

See details

Listing

Tensile testing machine-Universalp according to DIN 7500 Hegewald & Peschke H5TMNI

Sonsbeck

773 km

Tensile testing machine-Universalp according to DIN 7500
Hegewald & PeschkeH5TMNI

Call

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm Prodpfoiq Hxvex Abuec 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

See details

Listing

Velen

787 km

Bandsaw - Horizontal
HBMHBM 355

Call

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt Pedpsmhm Aqsfx Abuerc total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

See details

Listing

Press brake tooling Cnstamp Hemming tool for Lvd/Trumpf

Nanjing

8,910 km

Press brake tooling
CnstampHemming tool for Lvd/Trumpf

Call

Listing

Filter system suction exhaust system Oliver Fritz GmbH & Co. KG Filteranlagen

Großenlüder

1,017 km

Filter system suction exhaust system
Oliver Fritz GmbH & Co. KGFilteranlagen

Call

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Pededrtalopfx Abusrc Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

See details

Listing

Tool milling machine DECKEL FP1 Aktivdigital

Sonnenbühl

1,161 km

Tool milling machine
DECKELFP1 Aktivdigital

Call

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg Pedpfx Aeyg I Nfobuerc

See details

Listing

Sheet metal folder 2m press brake Prod-Masz Abkantbank Biegemaschine Mobile Abkantbank 2m/0.8 Kantbank

Innsbruck

1,366 km

Sheet metal folder 2m press brake
Prod-Masz Abkantbank BiegemaschineMobile Abkantbank 2m/0.8 Kantbank

€1,350

Fixed price VAT not applicable

Call

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Maximum working length: 2140 mm Prjdsc Rtv Tspfx Abuec max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

See details

Listing

Remaining Stock Urban/Stegmaier WS 103/AK1105/AK84

Germany

1,034 km

Remaining Stock
Urban/StegmaierWS 103/AK1105/AK84

Call

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Pjdpfx Ajwwvwyjbujrc

See details

Listing

Powder coating system Mini Spark / Romer Leasing / Mietkauf

Hürth

851 km

Powder coating system Mini
Spark / RomerLeasing / Mietkauf

€12,990

Fixed price plus VAT

Call

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Prsdpfx Aboctx Ireuoc Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

See details

Listing