Plate swivel fix

Rehnen Machinenbau PSF-250

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm Ndsdpfx Ahjiiy E Te Ujf grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Ndedpfx Ahjt R T Hce Uef Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Ndodpod N Rb Dsfx Ah Uef Drilling front heads on each side included Very good condition. Available immediately.

Condition: new, Year of construction: 2025, Size: 5 Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes Ndodpfx Ahodlhcrj Ujf fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Flue pipe connection Ø 220 mm Weight: 1.950 kg SPS control cabinet: 380 Volt

Condition: used, Year of construction: 2020, Used machine Year of construction: 2020 Equipment and technical data: Extendable workpiece support, spacing 600 mm Jointing milling unit FG201 with 2 milling heads for edge jointing on panels Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Ndedpfxsw Nafdj Ah Uof Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Edge feeding 1903 automatic transport for rolled and strip material GJ301 adhesive application system with sensing nozzle Automatic refill function, level monitoring with automatic glue refill Pressure unit 1912-3 pneumatic, first roller is driven with pneumatic immersion control End trimming unit 1918 (60 mm), pneumatic, chamfering 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional milling unit FR201 (2 x 0.6 kW, 18000 min-1) for flush, radius, and radiused exit Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12000 min-1), corner copying function up to 3 mm edge thickness Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip removal, for the contour milling unit 1832 Scraper unit 1929 Chip container HW reversible knives for scraper holder R = 2.0 mm (2 pcs required) FK701 FL-SCRAPER HM Location: Solingen Availability: Short-term

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the Nodpfjd Tyaasx Ah Uedf standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: excellent (used), SCM Multiflex angle centre for single-sided cross and longitudinal machining of window and door corners Tensioning spindle length 320mm, max. working range 320mm Feed system with rollers Profiling spindle length 320mm, max. working range Ndedpjwmcnwofx Ah Uof

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----- Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Nedpfexmk Atjx Ah Uedf Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Ndedpjw D Dhaefx Ah Ujf

Condition: used, 2-axis CNC spindle moulder "CASOLIN" model F 90 KTL USED MACHINE - V380/50 - "CE" [code: TOU-051] Complete with: * extended infeed table 1990x770 mm * extendable support bar * tenoning guard (for tools max. diameter 330 mm) * tenoning carriage * pendant control * support for powered feed unit * 4-roller feed unit "MAGGI" * strip protection device * spindle diameter: 40 mm * spindle speeds: 3000/4500/6000/8000/10000 rpm Nodpfxjw Awk Sj Ah Uodf * motor power: 7.5 kW