Mesh welder

SCHLATTER/SMEI PG 24

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Fpsdpfx Aex Ap Hpelwjg Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe Fpedjwi S Ixopfx Alwsg

Condition: good (used), fuel type: diesel, Year of construction: 1997, operating hours: 10,314 h, machine/vehicle number: JEE0055599, CASE 621 B excavator no. JEE0055599 1997 93kw Fpodpfsvxh R Aox Alwog 10314h

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Fpsdpfxsqa Am Tj Alweg Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net Fpedpfeh Rabnox Alwjg INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Fpjdpfx Aod N Rb Dolweg Tilting heads Drilling front heads on each side included Very good condition. Available immediately.

Condition: excellent (used), mileage: 380,000 km, power: 478 kW (649.90 HP), first registration: 02/2011, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 700 l, color: red, driver cabin: sleeper cab, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2011, Equipment: cruise control, = Additional options and equipment = - Refrigerator - Radio/CD player Fodpeuu Hfgofx Alwjpg - Sleeper cab - Toolbox = Notes = - Large fuel tank, 700L - AdBlue tank, 95L - 24-volt electrical system - JOST JSK 38C-1 - 3.5" fifth wheel coupling - Fifth wheel coupling on sliding frame - PTO hydraulic system - Heavy-duty Rockinger RO56 coupling at the rear - Front sliding coupling - Work lights - Toolbox = Further information = Transmission Transmission: Mercedes Powershift Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Suspension: air suspension Rear axle 2: Tire size: 315/65R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: leaf spring Rear axle 3: Tire size: 315/65R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: leaf spring Weights Payload: 250,000 kg Gross vehicle weight: 41,000 kg Functional Body brand: Mercedes-Benz Condition Technical condition: very good Visual condition: very good Damages: none Financial information Price: On request

Condition: reconditioned (used), Year of construction: 2003, Complete plant Primary impact mill, 2320x1700 mm. Mobile Production capacity 800 t/h 0-40 mm Limestone Fpodpfxolwya Ne Alweg Secondary two Laron Lau 8 hammer mills, 1620x700 mm opening.

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Fpodpfewikn Rjx Alwjg Min. pane size: 250x180mm Gas filling press: Models and triple available

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 Fpodpfxevc Aklo Alwjg A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *