Distribution chute

SCHUMA VR

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Kedpfxsh Hbpws Ab Njnc Available: 14 pieces

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm Knedpfstycdkjx Ab Nec column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) Kedpfx Asf A Nq Ajb Nsnc • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: ready for operation (used), Hello, Knedpfx Aboiq Iy Io Njc we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: like new (used), Year of construction: 2025, container length: 20 ft, color: grey-black, overall weight: 30,480 kg, maximum load weight: 27,380 kg, empty load weight: 3,100 kg, loading space volume: 31 m³, loading space width: 2,350 mm, loading space length: 5,898 mm, loading space height: 2,390 mm, 20' Open Side (Side Door) Shipping Container - Condition: ONE WAY - used once for sea freight with cargo - Exterior color: RAL7016 Anthracite gray - Weatherproof and waterproof - With valid CSC plate (for 5 years) - Cargo worthy - Available from depot in Hamburg / Delivery at extra cost OTHER COLORS: RAL5010 Gentian blue, RAL7035 Light gray CONTAINER CONSTRUCTION: - Double-leaf door with all-round rubber seal on the end face - Fully opening folding door on the long side - 12 x galvanized door locking bars Knedpfxegp Alhs Ab Nsc - Walls made of corrugated steel sheet, 2 mm thick - 2x ventilation openings on the side walls - Floor made of coated plywood, 28 mm thick - Forklift pockets / spacing = 2055 mm - Built according to ISO standard CONTAINER DIMENSIONS: - External dimensions (L x W x H): 6,058 x 2,438 x 2,591 mm - Internal dimensions (L x W x H): 5,898 x 2,350 x 2,390 mm - Door opening (W x H): Width: 5,702 mm x Height: 2,154 mm - Volume: 31.1 m³ - Tare weight: 3,100 kg - Payload: 27,380 kg CONTAINER APPLICATIONS: - Additional storage capacity - Storage of materials and tools - Temporary storage during relocation - Transport container - Showrooms - Living container - Recreation rooms - Mobile kitchens + bars - Workshops - Technical rooms - and more OUR SERVICES: - Container sales: All sizes + types / New + used - Europe-wide delivery by truck / side loader / rail / inland vessel - Container repair - Container modification - Accessories + spare parts for containers PAYMENT TERMS: Prepayment: The invoice amount must be fully transferred to the specified bank account before delivery or service provision. The order will be processed after payment is received. Payment by bank transfer: The invoice amounts must be transferred to the specified bank account within 7 days after the invoice date. Payment by PayPal: PayPal payments are possible, subject to an additional PayPal fee of 2.49 percent. FURTHER INFORMATION: Invoice with VAT shown (19%). The containers are located in an empty depot in the port of Hamburg. We distribute many other new + used containers of all types + sizes. We will gladly create a free, no-obligation quote for containers including delivery and any unloading. CONTACT US: We are always available to answer your questions! Container trade, shipping container, storage container, overseas container, deep-sea container, material container, warehouse container, construction site container, construction container, steel container, bar container, kiosk container, workshop container, event container, relocation container, archive container, freight container

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Kjdpfouk I Etsx Ab Nsnc

Condition: used, Good day, Ksdotk Hakspfx Ab Nonc We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. Kodjtwmxyspfx Ab Nenc - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting Kodpotqm Dmjfx Ab Nenc - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: new, diameter 200 mm height 105 mm weight of the machine ca. 25 kg Kodpohuxbrjfx Ab Nonc dimensions of the machine ca. 400 x 280x 150 m