Component

Siemens 6FC5114-0AA02-0AA2 Central Service Board SN:T-M42032780-!-

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Nwedeftzzgjpfx Aazol Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Nedpfom Twnlox Aazjwl Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Nwedpfx Asbql S Hsazsl Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2021, operating hours: 435 h, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Nedpfxsy Sy Nvj Aazswl Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Fuse Sift price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB

Condition: new, Year of construction: 2021, fuel type: diesel, number of cylinders: 6, Date of manufacture: 12/2021 Condition: new (unused) Make of engine: C7.1 Serial number: KRJ01138 Nwedpfoyym D Nex Aazsl Please contact for more information Worldwide delivery

Condition: used, Year of construction: 1995, cutting width 375 mm Nwedpfxotv Rgrj Aazsl Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Nwjdpfx Aaoyh R Uwezol Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] Nwsdpfxsuhbr Te Aazjl - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of hours under power : 46571 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor : KNOLL Nsdpfx Aaeuhaycezowl - Coolant tank * with high-pressure pump : 100 [bars] - Bar loader : TORNOS ROBOBAR SSF - Oil mist extractor : Elbaron - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Nwjdpfx Asyywb Seazsl Machine is immediately available! Price includes loading onto truck!