Frequency converter

Siemens Simodrive 6RB 2101-2A-Z

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Ljdpfx Aeic Rl Djnxjhl Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling Lhodpfx Aneruakgexol 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Ljdpex R R R Ujfx Anxjhl

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Lhjdpfew Hrrrjx Anxjl corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm Lhsdpfoyz Sd Rex Anxol max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Lhedpfxsygw Svs Anxel

Condition: like new (used), All parts are for sale, complet. Lhedpehi Tvbefx Anxel

Condition: excellent (used), CHIRON DZ 18.2 KW, YOM 2012 Control: Fanuc 31i Lsdpfx Asuviiwenxshl Path: X / Y / Z 630 x 520 x 400 mm, Pallet changer 2x 940 x 470 mm, 2 spindles Spindle distance 320 mm, 2×32-fold tool changer SK40 tool Max. Spindle rotation 10,000 rpm

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Lhedpfx Aneur Ravoxsl Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Lhodpfeyq Hq Njx Anxsl Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg