Control unit

Stöber K21R 80 K4 TLB 960 Getriebemotor mit C403Q1350D Getriebe SN: 1926741

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Giedema Snxspfx Aadon

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Giedoxyc Tkepfx Aaden Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: used, turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm Gjdpfjx Ni Dksx Aadjin centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t - machine out of teaching shop - Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A

Condition: ready for operation (used), functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 500 kg, axle configuration: 4x4, Year of construction: 1983, operating hours: 13,859 h, Truck/Tractor Unit MB-Trac 700K with hydraulic arm, registered as a tractor unit. We would be happy to demonstrate the vehicle for you. It is in good overall condition, fully operational, and immediately available. Technical specifications: Hydraulic arm: Tirre 9001 loading crane Max. outreach: 7.4 m Max. lifting capacity at max. outreach: 1,100 kg Max. lifting capacity at min. outreach: 1,100 kg Permissible total weight: 3,500 kg Transmission: 4-speed (split range/hare/tortoise gear) Engine: MB Daimler, 51 kW Displacement: 4 l Year of manufacture: 1983 Axle configuration: 4x4 Operating hours: 13,859 km Unladen weight: 5.5 t Gross weight: 6 t Gross weight with trailer: 40 t Body length x width: 104 cm x 220 cm Hydraulic connections for additional equipment at the front and rear + PTO shaft connection. The vehicle is equipped with four new tires plus a spare wheel. Giedpfexvyv Usx Aadon

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Gjdpjx Hz Rkefx Aadsin

Condition: ready for operation (used), SEW Eurodrive R17F DRS71M4 / TH geared motor SN: 01.1971210703.0008.14,used, good condition, 100% functional, scope of delivery as per photos Gsdpfx Aotwhr Ueadjin

Condition: used, Power: 0.18 kW Gedpoqgm Tiofx Aadoin For edge banding machine Homag type KL 37 DS or similar.

Condition: used, Technical details: Gisdpfx Aowm Ngtjadjn floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 through-holes with D=17mm *

Condition: as good as new (ex-display), 26F5R0U-Y00H, COMBIVERT F5, KEB frequency converter Model: 26F5R0U-Y00H Godpfxorclb Do Aadoin Type: COMBIVERT F5 Condition: As good as new

Condition: ready for operation (used), SEW Eurodrive RF32DT71C4BM/HF geared motor SN:01042020330102009 ,used, strong signs of wear, 100% functional, scope of delivery as per photos Giedeudgiispfx Aadon