Hand hydraulic pump with cylinder

Tangyes 100 Tonnen

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: Gbodpjhlz R Ssfx Adcsn -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Gbsdjdx D Tvspfx Adcjn

Year of construction: 1979, condition: used, throat: 22/29 mm Gedszif Sepfx Adcjbn drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Max head. 20m IP68 Godpfx Aderqgauscebn

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Gbedpfx Aett Ecdodcon Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table Gsdpfjghtvaex Adcjbn - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: used, Year of construction: 1994, total length: 6,300 mm, total width: 2,000 mm, total height: 1,800 mm, Empty weight: 24.000 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 10659 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Max. sheet thickness [mm]: 25 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 300 - Transport dimensions: 6300mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 24000kg Gbedpoxyklnsfx Adcsn - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, weight max. 10 t Gbjdpsf Ep Dijfx Adcjn workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: good (used), Various press brake tools, punches, dies Gsdpfow Emf Dsx Adcebn Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Gedpfx Asul U Svedcobn Drive power 10 KW