Thread rolling machine

SENY D-75 H

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 Kodpfxsw N Rh Ao Ah Ujnf X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds Knsdpfx Ahev Sva Ej Ujf maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Factory Consists : - Welding machines 14 pieces - Bending machines 10 pieces Kjdpfx Asqy E I Ueh Usnf - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler - Cementation furnace - Annealing furnace Lots of sapare parts

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Knedpfx Ahsvdknzo Uef

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Ksdpfx Ajuuz Iijh Uenf Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Kjdpfod Sitkex Ah Uonf Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA Ksdev Az Ucopfx Ah Ujnf weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Year of construction: 1999, condition: good (used), KRONEN K 50-4 ID.NO. 2834 Knedpfx Aou Iv Aveh Usf Kronen salad centrifuge mod K-50-4 for drying Vegetables, Fruit, salads etc. capacity up to 1200 kg / Hour depending on the product. Dimensions 85 x 60 cm Height 100 cm.

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 Knsdjrw Dknjpfx Ah Usf total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions Kedpoul Efmofx Ah Usnf and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data