Labeling laser marking station

Trumpf TruMark 3000

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Dcodpfx Absuy Ifge Eeb

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Djdpfx Aboxd Tike Escb Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: used, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1000 mm switched on hours: 37917 h centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm tailstock quill: MK 5 mm total power requirement: 20 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,9 x 2,28 x 1,8 m Dcodpfxjxg Nhno Ab Eeb Machine has been overhauled/refurbished: Ball screw Z overhauled, X-axis end position overhauled, new paint job. Conventional design with integrated automatic cycle control. Metric thread cutting, inch threads, DP threads. Chip conveyor not available. 4-jaw chuck with steady rest available. 3-jaw chuck mounted. *

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t Dcodpfjddhw Sex Ab Esb throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) Dcsdpfxewgbuio Ab Eob - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Dedsvwz T Uepfx Ab Escb

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Dcodpfx Aov Rfqqjb Eob

Condition: used, Year of construction: 2016, Laser type: PowerLine F100 Technical data: Travel distances of linear axes X/Y/Z axis: 800 / 300 / 300 mm Max. workpiece weight: 30 kg Heating, Ventilation, Air Conditioning: Operating temperature: 25°C +/- 10°C Storage temperature: 5°C to +40°C Ambient conditions: non-condensing, non-corrosive, frost-free Air electrical section: 160 m³/h Pneumatic supply: Medium: filtered, oil-free compressed air Max. permissible operating pressure: 6 bar Temperature range: -10° to +60°C Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007 Marking field size of the laser: 120 x 120 mm Operating and storage conditions: Floor load capacity: min. 500 kg/m² Clearance above: 2 m for ventilation Transport height: min. 2 m Room height: min. 2.50 m Electricity: Input fuse (protection): 3 x 16 A Nominal voltage: 400 V (+/-10%); 3P; N; PE Nominal frequency: 50/60 Hz; neutral conductor loaded Power consumption: 4 kVA (at 50 Hz) Size and weight: Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor) Length1): 1.80 m plus swivel arm 0.5 m (length without monitor) Height standing workstation: 1.20 m Working height: 0.96 m (standing workstation) Required space and volume 2): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Weight, approx.: 1500 kg 1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm. 2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations. Operating and storage conditions: - No direct sunlight - Do not place near radiators Dsdexqp Rdepfx Ab Eecb - Avoid strong temperature fluctuations - Do not install in areas with high dust levels - Do not install in areas with high levels of oil, solvent, or cleaning agent vapors

Condition: new, Year of construction: 2025, turning length: 2,000 mm, turning diameter: 660 mm, center width: 2,000 mm, CNC Cycle Lathe FTL660-2000 – Heavy-Duty Machining with Precision The FTL660-2000 from the FLASH series by GreMaT is a powerful CNC cycle lathe specifically designed for heavy-duty cutting applications. Featuring a 500 mm wide machine base, a solid monoblock cast bed, and flexible spindle options, it delivers maximum stability and precision for the most demanding turning operations. Combined with the Siemens 828D control, the machine stands out for its ease of operation, short setup times, and high process reliability—ideal for manufacturing companies that prioritize productivity and dependability. FTL660-2000 Highlights • Immediately available – secure your machine directly from stock (otherwise approx. 6 months delivery time). • Robust & massive – 500 mm wide machine bed and monoblock construction for maximum rigidity. • High flexibility – spindle bores up to Ø120 mm, various speed ranges. • Heavy-duty linear guides – stable and durable even with large workpieces. • Centrally mounted ball screw – higher precision, reduced wear. • Versatile tooling concept – 4-station tool post, 8-station turret, or gang tooling. Key Technical Data (Excerpt) • Max. swing over bed: Ø700 mm • Max. swing over cross slide: Ø480 mm • Max. workpiece length: 2000–3000 mm (depending on configuration) Dcodow T Ttvjpfx Ab Eob • Spindle bore: Ø120 mm • Bar capacity: Ø110 / Ø135 / Ø162 mm • Spindle nose: A2-11 • Spindle speed: 1000 / *800 rpm • Spindle motor: 15 / *18.5 kW • Tool positions: 4+2, *8+2 • Tailstock: manual or hydraulic, travel 100 mm • Bed width: 500 mm • Weight: approx. 7,600 kg Equipment includes: • Siemens 828D control + CTB driver + CTB motor • 15'' display, ShopTurn function • Taiwan linear guide + ball screw • A2-11 belt-driven spindle, max. speed: 1000 rpm • Spindle bore: φ120 mm, through hole: φ110 mm • Main servo motor with 22/30 kW • 15-inch Taiwanese hydraulic hollow chuck + hollow cylinder • 12-station servo turret, 100 mm center height • MT5 hydraulic tailstock • Manual steady rest (circular) • Air-conditioned electrical cabinet • Electronic handwheel • Automatic lubrication system • Automatic coolant system • Three-color warning light • Work light • USB and Ethernet connectivity • Foundation pads • Tools and toolbox • CE certificate Experience it live at EMO 2025! See the CNC cycle lathe FTL660-2000 live at EMO 2025. Experience its robustness, precision, and performance first-hand—and secure your production edge. 👉 Get your free EMO tickets now and schedule a personal appointment! Why choose the FTL660-2000? ✅ CNC cycle lathe with high machining capacity ✅ Immediately available—or approx. 6 months lead time for new orders ✅ Siemens 828D control for intuitive operation ✅ Ideal for heavy-duty machining of large workpieces ✅ Solid cast machine bed with integrated recirculating ball screw for increased rigidity and stability

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. Dedpfx Abowmn Szj Eecb In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications.